Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Orange
Gate repair in Orange typically costs $180-$640 for hinge and post work, $650-$1,800 for full restoration welding on historic iron, and $450-$1,200 for automatic opener replacement. Most Orange calls we handle are resolved in a single visit. If your gate is sagging, stuck, or no longer opening with the remote, call us at (626) 649-4572 for a written quote before any work begins.
We know Orange streets, from the wide canopies of Cambridge and Lemon near the Plaza to the post-war tract blocks around McPherson. Our team works on both ends of that spectrum: Victorian-era ornamental iron that needs period-matching weld repair, and 1960s wrought-iron driveway gates with rusted hinges and tired openers. You’ll get a technician who asks before moving anything, lays drop cloths where work happens, and shows you the cleanup photo before leaving.
Why Latch & Post Gate Repair Is Orange’s Preferred Gate Repair Company
Orange homeowners call us because the work we do in Old Towne is different from a standard gate swap. A sagging 1920s iron gate off Maple or Palmyra often needs the hinge post footing re-set rather than a new panel. We diagnose that on the first visit, with a written price you’ll see before we touch a single bolt.
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been doing this work since 2009. Our technicians are background-checked and uniformed, factory-trained on FAAC, BFT, Linear, and Viking, plus LiftMaster and DoorKing. Every repair and installation carries the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print.
We price repairs the way you’d want a neighbor to: with the exact number in writing upfront. A standard gate-latch replacement in Orange runs $120-$220, and you’ll see that figure before we start. We also wear shoe covers and lay drop cloths whenever we step inside a home or work near finished floors, and we use quiet tools if your kids are napping. Details most gate companies never mention. We do.
Gate Welding in Orange
Gate welding in Orange is something we handle differently depending on which side of the 55 you live on. In Old Towne, we’re often welding cracked scrollwork or broken hinge leaves on original wrought-iron gates. In the post-war tracts east of Glassell, we’re more often repairing rusted-through stiles and failed welds on 50-70 year old driveway gates. Most weld repairs run $150-$400 depending on severity; a broken hinge leaf is at the lower end, a fully cracked top rail at the higher end.
Ornamental Iron Restoration and Period Welding
This is the work that sets a restoration gate tech apart. We match the weld profile, grind it smooth, and re-paint to match existing patina rather than leaving a bright fresh bead on an old gate.
For homeowners near Old Towne who want an original gate preserved, this is not a place to strip and replace. A careful weld can outlast the panel that surrounds it.
Structural Repairs and Post-Anchor Welding
When a post anchor fails, welding the panel alone doesn’t fix the problem. We inspect the footing, re-set or re-anchor the post where needed, then weld any cracked hinge tabs or spread stiles.
Expect a thorough look at the whole gate, not just the part that cracked. That’s what keeps a repair from failing again in a season.
Commercial Gate Repair in Orange
Commercial gate repair in Orange covers apartment and condominium complexes, small office lots, parking areas, and the few light-industrial properties scattered north of the 22. A downed commercial gate leaves a property exposed and tenants frustrated. We respond with a written price and get the gate operational again, usually during the first visit.
Operator and Access Control Service
Automatic and vehicular gate operators on commercial properties are often neglected until they fail. We service LiftMaster and FAAC operators, and DoorKing and BFT access systems, with pricing for a commercial opener repair typically between $400 and $1,100 depending on the drive type.
If the gate is down because an operator burned out, we can usually recover it with a same-week service appointment and a clear written quote.
Hinge Post and Heavy Gate Structural Repair
Heavy commercial gates put steady load on their hinge posts. Once a post shifts out of plumb, the gate drags or fails to close, and no opener adjustment will fix the root cause. We re-set posts and repair the structural steel on site.
Commercial repairs are priced by a full assessment, not by guesswork, and everything is on paper before we start.
Trusted Brands We Service in Orange
We stock replacement parts and service the operators Orange homeowners actually have: LiftMaster, FAAC, BFT, DoorKing, Linear, Viking, Elite, Ghost Controls, and Mighty Mule. If your FAAC hydraulic operator is leaking or your BFT control board is throwing a fault, we carry common boards, limits, and safety-edge parts locally for faster turnaround. A written parts-and-labor price comes with every job, and you’ll know the exact number before we install anything.
Common Gate Repair Problems We See in Orange Homes
- Post-Santa-Ana hinge-post failure: Orange sits far enough inland that fall wind events hit hard, and a swing gate catches wind like a sail. We routinely see shifted post footings and cracked hinge leaves after a strong Santa Ana, even when the gate panel looks fine.
- Rust scale and cracked welds on mid-century iron: Orange’s 1950s-1970s tract neighborhoods are full of ornamental iron driveway gates now 50-70 years old. Rust scale at the bottom rail, sagging hinges, and fatigue cracks at welds are the common failure points.
- Dried and checked wood gates in Old Towne: Orange’s inland low humidity dries period wood gates faster than in coastal cities. Stile splitting and loose hardware come with that territory.
- Burnt-out opener motors after wind overload: A heavy double gate that’s binding or lacking proper stops will overload an automatic opener during a gust. We see this disproportionately after fall wind events in Orange.
Pricing for Gate Repair in Orange, CA
Basic gate repair in Orange runs $180-$350 for hinge replacement, latch repair, and realignment work. Weld repairs and cracked frame members run $300-$700 depending on size and severity. Automatic opener replacement or repair typically ranges $450-$1,200 for residential equipment. These are Orange-market numbers, not countywide averages. What changes your price most is whether the post footing is involved, how heavy the gate is, and whether we’re welding. You’ll always get a precise written quote before work starts, and a free estimate costs you nothing. Call (626) 649-4572 any time for an exact number.
We Also Serve Cities Near Orange
Our Gate Repair team serves Orange and the surrounding communities of Santa Ana, Villa Park, Tustin, and Garden Grove. If you’re in any of these areas and the gate won’t open, or a hinge is groaning, call us. Learn more about Gate Repair in Orange or reach us directly at (626) 649-4572.
Serving Orange, CA - Our Local Coverage Area
We’re based in the Orange area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Orange
Yes, and we recommend restoration over replacement for most Old Towne gates. We were called to a Craftsman bungalow just off the Plaza where the original iron driveway swing gate had dropped enough to drag on the concrete, and the homeowner wanted it saved, not swapped for a modern tubular-steel panel. Our tech found the failure at the hinge post rather than the panel, the footing had shifted after years of Santa Ana wind loading. We pulled and re-set the footing, welded the cracked hinge leaf, corrected the sag, and match-painted the repair to blend with the existing patina. The gate now swings clean, and we paired it with a LiftMaster operator so the entry could be automated without touching the historic iron. Call (626) 649-4572 for a restoration quote.
Because wind load on a swing gate is enormous, and if the gate was binding or compromised, the opener motor burns out or the entrapment protection trips. Orange sits far enough inland that Santa Ana gusts hit full force, and gates that were already dragging take the load straight through the motor and limit assembly. Call (626) 649-4572, and we’ll inspect both the operator and the gate’s mechanical condition.
Yes, those are core brands for us. We service and stock parts for LiftMaster, FAAC, BFT, and DoorKing, along with Linear, Viking, Ghost Controls, Elite, and Mighty Mule. Call (626) 649-4572 with your model number and we’ll confirm availability before scheduling.
Yes, and we do it without cutting or modifying the original iron. We install the operator on a new or existing post beside the gate and use a bracket and arm system that drives the gate cleanly. The original scrollwork, hinges, and latch stay intact. If the gate has rotted wood posts, we’ll assess that too and price the repair separately. Call (626) 649-4572 for an on-site visit.
You’ll get a written price before work starts, shoe covers and drop cloths if we enter the home, and a cleanup photo before we leave. The repair itself usually involves re-setting a shifted post, welding cracked frame members, or replacing rusted hinges. On 50-70 year old tract-home iron, we often recommend addressing the corrosion at the bottom rail rather than patching it. Call (626) 649-4572 to schedule a visit.
If your gate is sagging, stuck, or refusing to open, call Latch & Post Gate Repair at (626) 649-4572. You’ll get a live person around the clock, a written price before any work starts, and a gate that works like it should.
Written by Cody Beckman, Owner at Latch & Post Gate Repair in Orange, CA.