Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Napa
Gate repair in Napa usually means one of two things: a gate that won’t open, or a gate that won’t close square. We’ve worked on both across the valley, from Victorian-era gates in downtown to slide gates on Silverado Trail winery properties. Most repairs in Napa run between $180 and $650, and you’ll get the exact number in writing before any work starts. Call (626) 649-4572 and a live person answers, day or night.
What makes Napa different is what’s under the gate. The 2014 South Napa earthquake cracked pilaster foundations and knocked posts out of plumb all over the city, and the valley floor’s expansive clay keeps heaving footings seasonally. That means the hinge post your gate hangs from may be tilting even when the hinges themselves look fine. We check the post first, because that’s where most Napa gate problems actually begin.
Why Latch & Post Gate Repair Is Napa’s Preferred Gate Repair Company
We’re a Gate Repair specialist, not a general handyman. Every technician who shows up at a Napa home is background-checked, uniformed, and factory-trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for those brands so we’re not driving back and forth across the valley to source a control board.
Napa homeowners tell us the same thing: the crew’s conduct matters as much as the fix. So we follow the Cedarwell C.A.R.E. routine on every visit. Shoe covers and drop cloths before we step inside. We ask before moving anything. Quiet tools when there’s a sleeping kid or a nervous dog. And a photo of the clean-up before we leave, so you can see what we saw.
Every job is covered by the 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fine print. Since 2009, that’s how we’ve operated as part of the Cedarwell family of independently owned gate specialists.
Wrought Iron Gate Repair in Napa
Wrought Iron Gate Repair in Napa is its own discipline because so many of these gates are heavy, ornamental, and hung on masonry pilasters that settle. We see it on the estate parcels off Silverado Trail and on older downtown properties where the gate has been in place for decades. The ironwork itself may be sound, but the gate drags because the hinge post moved. That’s the repair: re-leveling the post, re-hanging the gate, and only then addressing the iron.
Post and pilaster realignment
When a wrought iron gate won’t swing level, we re-set and re-shim the post before touching hinges or latches. On masonry pilasters with earthquake cracks, we assess whether the foundation can be stabilized or whether the post needs a new footing. Most post realignment in Napa runs $250 to $550.
Iron restoration and hinge rebuilding
Napa’s wet winters rust ungalvanized hardware fast. We rebuild hinge barrels, re-weld cracked scrollwork, and replace rusted latch components. The iron gets cleaned, primed, and touched up so the repair blends. Wrought iron restoration work typically runs $200 to $600 depending on the extent of rust and the number of hinge points.
Metal Gate Repair in Napa
Metal Gate Repair in Napa covers everything from sagging aluminum driveway gates to commercial-grade steel slide gates. The climate here works against metal: dry summers bake powder coating, wet winters push rust into welds and bolt holes, and the clay soil twists frames if the footings give. The fix usually starts with the post, then the gate panel, then the operator.
Sagging frame correction
When a metal gate drags at the latch side, the frame has usually racked because the hinge post settled. We square the panel, re-level the post, and re-hang the gate so the latch catches cleanly. This repair in Napa typically runs $180 to $420.
Operator mounting and chain or rack repair
On slide gates, a tilted post throws the rack and pinion out of mesh and strips teeth. We re-level the post, reset the operator, and replace the damaged rack or chain. Metal gate operator mounting repairs in Napa run $300 to $650, with parts priced separately and always shown in writing first.
Trusted Brands We Service in Napa
We’re factory-trained on the operators and control boards Napa homeowners actually run, including Linear, Viking, Ghost Controls, and DoorKing. On estate and winery properties we often see LiftMaster CSW200 and Elite slide operators, and we keep common boards, photocells, and remote receivers for those units in our local stock so a Napa repair happens on the first visit, not the third. If your operator is older and the control board has failed, we’ll tell you honestly whether a retrofit makes sense or whether a replacement unit is the cheaper call.
Common Gate Repair Problems We See in Napa Homes
- Posts out of plumb from the 2014 earthquake and clay heave. The South Napa quake cracked pilasters citywide, and the valley floor’s expansive clay keeps working footings loose each wet-dry cycle. Swing gates on tilting posts drag, sag, and refuse to latch.
- Obsolete control boards without entrapment protection. Many older estate operators in Napa predate current safety photocell and edge sensor requirements. We can often retrofit modern safety devices onto an existing board – and when the board’s too old, we’ll tell you exactly what a replacement costs.
- Warped wooden gates on Victorian and Craftsman homes. Downtown Napa’s original houses often have wooden gates that swell in wet winters, then crack in summer heat. The frame warps and the gate sticks. Some are worth rebuilding, some aren’t, and we’ll give you both numbers so you can choose.
- Corroded rack and pinion hardware on slide gates. Ungalvanized steel on vineyard and estate slide gates rusts fast in Napa’s alternating rain and heat. Rusted rack teeth strip and the operator chain jumps. We replace the rack, reset the chain, and re-align the operator mount.
Pricing for Gate Repair in Napa, CA
A typical hinge and post realignment in Napa runs $250 to $550. Latch and lock replacements run $180 to $320. Wrought iron restoration runs $200 to $600. Operator repairs on slide gates run $300 to $650, plus parts if a control board or rack section needs replacing. You’ll see the full line-item price in writing before any work starts, and if you don’t want to go ahead, there’s no charge for the estimate and no pressure to accept.
Call (626) 649-4572 for a free estimate. We’ll give you a straight answer on cost before we touch anything.
We Also Serve Cities Near Napa
In addition to Gate Repair in Napa, our teams cover the surrounding wine country. That includes Boyes Hot Springs, Sonoma, Winters, and Fairfield. If your gate is sticking, sagging, or stripping its operator, call (626) 649-4572 and we’ll schedule a visit at your convenience.
Serving Napa, CA - Our Local Coverage Area
We’re based in the Napa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Napa
Because the hinge post is moving, not the hinges. Napa’s expansive clay soil heaves footings between wet and dry seasons, and many posts were knocked slightly out of plumb in the 2014 South Napa earthquake. We fix the post first, then the gate stays aligned. Call (626) 649-4572 and we’ll assess the footing for free.
Often yes. Many older boards accept aftermarket photocells and edge sensors, and we retrofit entrapment protection onto legacy operators regularly. When the board is too old to accept modern inputs, we’ll show you the retrofit cost versus the replacement cost, and you decide.
Because these gates cycle dozens of times a day with delivery trucks, tour vans, and tasting-room traffic, and many are tied to intercom systems integrated with reservation software. That constant cycling accelerates wear on rack and pinion hardware and loop detectors in a way a residential gate never sees. We service that specific equipment, including the loop detector wiring.
Depends on the frame. Old-growth redwood from Victorian-era Napa often has decades left in it if the joints are re-pinned and the hardware replaced. If the top rail is rotted through, rebuilding the panel may cost more than a new one. We’ll give you both numbers in writing and let you choose. Call (626) 649-4572 for a free assessment.
Yes, if the panel gets direct sun and the gate cycles fewer than 15 to 20 times a day. We install solar-friendly openers from brands like Ghost Controls and Viking, and we size the battery to the gate’s weight and the winter sun angle. For high-cycle winery gates, a hardwired operator with a battery backup is usually the better answer. Call (626) 649-4572 and we’ll help you choose.
Written by Cody Beckman, owner at Latch & Post Gate Repair, serving Napa since 2009.





Before
After
Before
After
Before
After