Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Mountain View
Most gate repairs in Mountain View take one visit and run between $185 and $650. The exact number depends on what’s wrong, but you’ll see it in writing before we touch anything. Our Gate Repair team works on swing gates, sliding gates, electric operators, hinges, posts, locks, and rust damage throughout Mountain View, and we answer the phone 24/7. Call (626) 649-4572 and a live person picks up, even at 2 a.m. when a gate won’t close and the dog is eyeing the sidewalk.
We know Mountain View’s older ranch homes and newer gated complexes because that’s what we work on every week with our Electric Gate Repair in Mountain View. The soil here moves. The air near the bay eats steel faster than people expect. Those two facts shape most of what we fix, and we plan for both.
Key Takeaways
- Most gate repairs in Mountain View are quoted and completed in one visit, between $185 and $650 for typical labor and parts.
- Clay soil heave and bay air corrosion are the two local conditions that drive most repair calls here.
- Written price before work starts, shoe covers and drop cloths on every visit, cleanup photo before we leave.
- Every repair is covered by the 365-Day Done Right Promise: if it’s not right, we make it right.
Why Latch & Post Gate Repair Is Mountain View’s Preferred Gate Repair Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been doing this work since 2009. Mountain View homeowners call us because we name the actual part we’ll replace and the actual dollar figure before we start. There’s no vague estimate and no call later with a new number. The written price covers the work.
Our technicians are background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values on every Mountain View job: clean up like it’s our own home, ask before moving or touching anything, respect the family’s time and quiet hours, and explain the price before the work. That matters when there’s a sleeping kid in the front bedroom and a cat that bolts for the open gate. We’ll schedule around nap time when we can, and we choose pet-safe lubricants where there’s a choice.
Cody Beckman, who leads Latch & Post Gate Repair, built the company on a simple idea: a gate is only as good as the latch that holds it and the post that carries it. That’s the job we focus on, in Mountain View and across the Bay Area.
Iron Gate Repair in Mountain View
Iron gate repair in Mountain View is most often about corrosion, not impact damage. The salt air off San Francisco Bay settles on wrought iron and steel, works its way under paint, and rusts hinges, welds, and lower gate frames years before the inland rate. In neighborhoods like Cuesta Park and Rex Manor, we regularly find gate panels that look fine from the street but have hinge posts rusted thin at the base, where moisture collects and never fully dries.
Hinge And Frame Repair
We cut out rusted sections, weld in new steel, and reinforce hinge points that have wallowed out. When a hinge seizes from rust, the gate begins to drag and the operator motor strains, which shortens the operator’s life. On Mountain View iron gates we replace standard fixings with stainless hardware where the original galvanised pieces have corroded. It’s a small change that prevents a repeat call in three years.
Weld And Rust Treatment
For surface rust we grind, treat with inhibitor, and repaint. For structural rust we replace the section. Iron gate repair in Mountain View typically runs $240 to $580 for hinge replacement and weld work on a standard driveway gate, including materials, and you’ll see the exact figure in writing before we start.
Sliding Gate Repair in Mountain View
Sliding gate repair in Mountain View spans two very different failure patterns. At the dense apartment and townhome complexes along El Camino Real, vehicle gates cycle 80 to 100 times a day, which burns motors and wears rack and pinion assemblies far faster than a single-family gate that cycles maybe 10 times daily. At homes in Monta Loma and other ranch-era neighborhoods, sliding gates fail differently: the footing under the track shifts with the clay, the gate drags, and the motor works against the bind until it overheats.
Track Realignment And Rack Repair
A sliding gate that shudders, squeals, or stops partway usually has a track that’s out of level or a rack that’s worn unevenly. We check the footing first, because in Mountain View the track rarely moves by itself. When the soil under the concrete has shifted, resetting the rail without correcting the base just buys a few months. Rack and track alignment work on a standard slide gate here runs $260 to $640, depending on the length of the run and how much the ground has moved.
Motor And Control Board Service
High-cycle gates on El Camino Real need motors and operators rated for the load, because an undersized motor on a 100-cycle day will die young. For control boards, salt air is the quiet killer: corrosion across terminals causes intermittent failures that look like electrical gremlins. We stock common Linear, Viking, and DoorKing boards and parts locally for Mountain View customers, which means less waiting when a board shorts.
Trusted Brands We Service in Mountain View
Our technicians are factory-trained on the brands families in Mountain View actually own: Linear, Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. We keep common boards, remotes, and safety sensors available for fast turnaround. When a Linear operator board fails at a Shoreline West condo or a DoorKing slide motor burns out on an El Camino Real complex, we typically have the replacement on the truck or available for a next-day return visit. The right part, ordered once, fitted once.
Common Gate Repair Problems We See in Mountain View Homes
- Post heave and misalignment. Mountain View’s expansive clay soil swells in wet winters and shrinks in dry summers. Retrofit gates on shallow 1950s-70s ranch footings tilt seasonally, throwing swing gates out of square and sliding gates off their rails.
- Hinge and weld corrosion near the bay. Salt air accelerates rust on iron and steel gates in neighborhoods like Rex Manor and Cuesta Park. Hinges seize, welds thin, and lower panels rust through while the rest of the gate looks fine.
- High-cycle motor and rack wear on El Camino Real. Apartment and townhome sliding gates that see 80-100 daily cycles from shift-working renters wear out motors, gears, and racks years before a typical suburban gate.
- Safety sensor faults from misaligned posts. When a post heaves and the gate sags, the photocell beam can trip intermittently, which makes the gate stop mid-travel or refuse to close. The operator is often fine; the geometry underneath it isn’t.
Pricing for Gate Repair in Mountain View, CA
Here’s what gate repair in Mountain View realistically costs.
- Latch and lock replacement: $145 to $320
- Hinge replacement (iron gate): $240 to $580
- Sliding gate track realignment: $260 to $640
- Operator or control board replacement: $380 to $850
- Post resetting with deeper footing: $450 to $900
- Rust treatment and repaint: $220 to $520
Labor rates, part costs, and the condition of the existing post or track all affect the final number. What doesn’t change is this: we give you a written price before any work begins, and we don’t start until that number is agreed. Estimates are free. Call (626) 649-4572 and we’ll walk you through what’s reasonable for your specific gate.
One field note worth sharing, because it shows how geography changes the repair. We were called to a Monta Loma ranch home where a LiftMaster swing gate operator had started stalling mid-travel. The hinge post had heaved nearly two inches from clay expansion, throwing the gate out of square and tripping the safety photocell. After re-pouring a deeper footing and correcting the sag, we replaced the galvanised hinges with stainless and the gate cycled cleanly again. A fix that would have been pointless without addressing the post first.
We Also Serve Cities Near Mountain View
Our Gate Repair in Mountain View team also covers Los Altos, Sunnyvale, Stanford, and Cupertino. The drive is short, the pricing stays the same, and the written-quote rule applies everywhere we work. If you’re in one of those cities and your gate is sagging, seized, or refusing to close, call (626) 649-4572.
Serving Mountain View, CA - Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Mountain View
Mountain View sits on expansive clay that swells with winter moisture and shrinks in summer drought. Each cycle moves the soil under your gate posts, and shallow retrofit footings on ranch-era homes are especially vulnerable. A post that tilts even an inch can bind a swing gate or drag a sliding gate off its rail, and the operator will strain against the bind until something fails. The fix is resetting the post in a deeper, properly anchored footing. Call (626) 649-4572 if your gate seems to get worse every winter.
Salt air from San Francisco Bay carries chlorides that accelerate rust on steel and iron, especially at hinge points, weld seams, and control board terminals. Galvanised coatings corrode, hinge pins seize, and boards develop intermittent electrical faults. Stainless hardware and sealed boards last measurably longer here, and we spec them on Mountain View jobs where the original galvanised or bare steel has already failed. For a quote on hinge replacement or board work, call (626) 649-4572.
The sliding gates along El Camino Real cycle 80 to 100 times a day because of dense occupancy and shift schedules, which is four to five times the load a suburban sliding gate sees. Motors overheat, racks wear unevenly, and limit switches fail from sheer repetition. If your complex’s gate is down monthly, the likely answer is an undersized motor for the cycle count, not a defective unit. We can assess the load and recommend a properly rated operator. Call (626) 649-4572.
Usually not. A gate that sags in the middle typically has a hinge post that’s tilting or a hinge that has worn, not a panel that’s structurally done. On Mountain View homes the cause is usually soil movement under the post. We reset the post, correct the alignment, and replace the worn hinge or welded joint. The panel stays. You’ll get a written quote for the actual fix before we start. Call (626) 649-4572.
Yes. Automatic gates in California are required to have functioning safety sensors that stop and reverse the gate if a person, pet, or vehicle is in the path. The system should reverse immediately when you block the beam. If your gate closes on an obstruction, hesitates, or reverses for no apparent cause, the sensors or their alignment need service. That’s a regular part of every automated Gate Repair call we do. We test the beam as part of the service. Call (626) 649-4572 to schedule a check.
If your gate is sagging, seized, noisy, or refusing to move, call (626) 649-4572. A live person answers, day or night. We’ll ask what’s happening, give you a straight sense of the likely repair and the cost range, and schedule a visit that fits your household. When we arrive, we’ll put on shoe covers and lay drop cloths before we step inside, give you a written price before any work starts, and show you a photo of the clean-up before we leave. That’s the Cedarwell Care Promise, and it applies to every job in Mountain View.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Mountain View and the surrounding Bay Area since 2009.