Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Mount Dora
Most gate repair calls we take in Mount Dora come down to one of two things: a control board that got hit by lightning rolling off Lake Dora, or a hinge and post that have been quietly rusting in the humidity for years. A typical gate operator board replacement in Mount Dora runs $280 to $480, and a sagging gate realignment with new hinges usually lands between $190 and $350. We know the difference between a $12 capacitor fix and a $400 board replacement, and you’ll see which one you need in writing before we start. Call (626) 649-4572 and a person answers – 24 hours a day, every day.
Our techs work the neighborhoods off McDonald Street, the Biscayne Heights area, the historic downtown grid, and the HOA communities along the US-441 corridor every week. That matters because gate repair in Mount Dora is not the same job as gate repair ten miles down the road. The lakes channel the storms, the tight driveways force specific gate types, and the limestone water eats metal faster than anyone expects. We bring the right parts, the right tools, and a written price before we touch a single bolt.
Why Latch & Post Gate Repair Is Mount Dora’s Preferred Gate Repair Company
Latch & Post Gate Repair has operated since 2009 as part of the Cedarwell family of independently owned gate specialists. We focus on three things and nothing else: gate repair, gate installation, and electric gate repair. When we roll into a Mount Dora community, the truck carries genuine LiftMaster, Linear, FAAC, BFT, and Viking parts – not whatever fits from a big-box shelf. Cody Beckman leads our team with one rule that never bends: the gate has to work right, and the family has to never notice we were there except that the gate works again.
Mount Dora homeowners keep calling us back for a reason that has nothing to do with advertising. We wear shoe covers and lay drop cloths before we step inside a garage or entryway. We ask before moving anything. We explain the price before the work, not after. And we photograph the cleanup before we leave, every single visit. That routine is the Cedarwell C.A.R.E. promise: clean up like it’s our own home, ask before we touch anything, respect your time and quiet hours, and explain the price up front. No upsell, no pressure, no mess.
Sliding Gate Repair in Mount Dora
Sliding Gate Repair in Mount Dora often comes down to one of three culprits: a seized roller that has been grinding on the track, a rack and pinion gear that has worn a few teeth flat, or a control board that took a lightning surge and stopped talking to the motor. Because so many Mount Dora driveways sit on shared rights-of-way with no room for a gate to swing, slide gates are the default for whole neighborhoods off McDonald Street and along the US-441 corridor. When a slide gate stops mid-travel and leaves a car stranded half in, half out, that is the call we handle most during summer storm season.
Most slide gate repairs in Mount Dora run between $175 and $420, depending on whether we are replacing rollers, realigning the track, swapping a surge-damaged board, or all three. You get a written price before we start, and it will not change unless you ask us to add something.
Rack and Pinion Track Work
A slide gate moves along a toothed rack bolted to the gate frame, driven by a pinion gear on the operator. In Mount Dora’s tight shared driveways, a gate that drags or shudders usually has a rack that has come loose from years of sun expansion and rain contraction. We re-bolt, re-shim, and re-time the rack so the gate rolls clean instead of lurching every few feet.
Operator and Board Replacement
When lightning hits close off Lake Dora, the surge runs straight into the operator and cooks the control board even when the gate itself tests fine mechanically. We stock surge-suppressed LiftMaster and Linear boards in our Mount Dora truck all through storm season. One visit gets your slide gate moving again, with photo-eyes and keypad entry confirmed before we leave.
Wrought Iron Gate Repair in Mount Dora
Wrought Iron Gate Repair in Mount Dora is a different animal than slide gate work. The historic downtown core and the older Country Club of Mount Dora subdivisions hold dozens of ornamental pedestrian and driveway gates that have been drinking lake humidity for decades. Constant moisture off Lake Dora and Lake Gertrude rusts the iron from the inside out, and the hard limestone water leaves mineral scaling on hinges, rollers, and every exposed fastener. A gate that looks fine from ten feet may have a hinge pin that has seized solid and a bottom rail that is paper-thin with rust.
Typical wrought iron gate repair in Mount Dora runs $220 to $600, covering hinge replacement, rust grinding, re-welding cracked joints, and fresh rust-resistant coating on the repaired sections. We do not paint your whole gate and call it fixed. We repair what is broken and treat what is starting to fail so you are not calling us again in six months.
Hinge and Rust Repair
A sagging wrought-iron gate is almost always a hinge problem first and a welding problem second. We pull the gate, replace seized hinge pins and bushings, grind back surface rust to see what metal is actually left, and re-weld any cracked or separated joints. The repaired steel gets a rust-inhibiting primer and a matched finish coat before we hang it back in place.
Pedestrian Gate and Post Work
Downtown Mount Dora has dozens of decorative pedestrian gates set into old brick and stucco posts that have shifted with age. We reset loose posts, re-anchor hinge mounts, and re-square the gate so it latches with one hand instead of needing a shoulder. We can schedule around nap time if you have small kids, and we use quiet hand tools whenever possible.
Trusted Brands We Service in Mount Dora
We are factory-trained on the brands Mount Dora families actually own, and we keep Mount Dora-specific parts on the truck. LiftMaster and Linear gates dominate the HOA communities along the US-441 corridor and off McDonald Street, and we stock surge-suppressed boards for both every May through September. We also service FAAC, BFT, and Viking operators for the older slide and swing systems still running in the Country Club of Mount Dora subdivisions and the historic core. One visit gets the right fix on the right brand, not a generic part that mostly works.
Common Gate Repair Problems We See in Mount Dora Homes
- Lightning-killed control boards. Mount Dora’s afternoon storms roll straight off Lake Dora and Lake Gertrude, and a single strike can fry a board while the motor and rack test perfectly fine. We swap in surge-suppressed replacements and add protection so it does not happen again next week.
- Seized and rusted hinges. The constant lake humidity and limestone-heavy water accelerate rust on exposed hardware, especially on the older wrought-iron and steel gates in the historic downtown core and the Country Club subdivisions.
- Sagging swing gates on narrow shared driveways. Mount Dora’s older homes often wedge a swing gate into a right-of-way with no room for error. Settling post footings and mineral-scaled hinges eventually drag the gate low enough to scrape the driveway.
- Slide gate roller and track failures on tight rights-of-way. When every inch counts, a slide gate that jumps its track or binds on a worn roller blocks the only way in and out. We stage repairs from the sidewalk so both neighbors can keep moving through a single tight entry.
Pricing for Gate Repair in Mount Dora, FL
Here is what we quote in Mount Dora, day in and day out. Slide gate roller and track repair lands between $175 and $320. Operator control board replacement runs $280 to $480, depending on brand and whether we add a surge suppressor. Wrought iron gate hinge and rust repair typically runs $220 to $600, and a full gate realignment with post stabilization sits between $190 and $350. What moves the number is the condition of the hinge posts, the age of the operator, and whether we are repairing metal or replacing it. You get the exact figure in writing before any work starts, and that figure does not change mid-job. Call (626) 649-4572 for a free estimate – no fee to come look, no pressure to say yes.
We Also Serve Cities Near Mount Dora
Our Gate Repair team covers the Lake County communities around Mount Dora, including Eustis, Tavares, Leesburg, and Fruitland Park. If you live just outside the city limits but still deal with the same lake-driven storms and tight driveways, give us a call – same written-price promise, same cleanup routine, same live person on the phone. Learn more about our work across the area on our Gate Repair in Mount Dora page.
Serving Mount Dora, FL - Our Local Coverage Area
We’re based in the Mount Dora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Mount Dora
Mount Dora’s lake-channeled lightning strikes run straight into the operator’s control board and fry it, even when the motor, rack, and hinges are all in perfect shape. This is the single most common repair call we take in the HOA communities off McDonald Street and along US-441 between May and September. We stock surge-suppressed LiftMaster and Linear boards on the truck all storm season so we can replace the board, confirm the photo-eyes and keypad, and get your gate moving in one visit. Call (626) 649-4572 for an exact quote – it only takes a few minutes to diagnose.
Yes, in fact most narrow and shared Mount Dora driveways are better served by a slide gate, and we retrofit swing gates to slide configurations regularly. The tight rights-of-way in the historic core and the older subdivisions rarely gave builders enough room for a swing gate to clear parked cars and still open fully. We measure the available track run, check the post and footing condition, and give you a written price for the full retrofit before any work begins. Call (626) 649-4572 for a free measure and a straight answer on what will fit.
No, most sagging gates in Mount Dora need hinge and post work, not a full replacement. The sag usually comes from a seized or worn hinge pin, mineral scaling on the hinge barrel, or a post footing that has settled in the limestone-heavy soil. We re-hang the gate with new hinges, re-square it, and stabilize the post if needed – and that fix typically runs $190 to $350, far less than a new gate. Call (626) 649-4572 for an exact quote before you spend money on a gate you might not need.
Yes, all automatic vehicular gates in Mount Dora must have functioning safety sensors and photo-eyes, and if yours are dead, the gate should not run. When lightning takes out a board, it often takes the loop detector and photo-eyes with it, which is why we test every safety component on every operator repair, not just the board. We will not leave you with a gate that moves but cannot see a child, a pet, or a car in its path. Call (626) 649-4572 and we will confirm your sensors are working correctly as part of any repair.
We repair both. The wrought-iron pedestrian gates and fencing around Mount Dora’s historic downtown and the Country Club of Mount Dora neighborhoods are a big part of our work, and the lake humidity is hard on them. We replace seized hinge pins, grind back rust, re-weld cracked joints, and coat the repaired metal so it holds up against the constant moisture. Pedestrian gate repairs typically run $180 to $400 depending on how much iron needs to be rebuilt. Call (626) 649-4572 for an honest look at what your gate actually needs.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Mount Dora since 2009.