Gate Repair in Larkspur - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Repair Across Larkspur

Gate repair in Larkspur costs roughly $185 to $600 for most hinge, latch, and realignment work, with electric gate operator repairs running $280 to $850 depending on the board, motor, or arm involved. We typically reach Larkspur homes within 60 to 90 minutes for most calls, and every price goes in writing before we touch anything. If your gate is sagging, seized, or refusing to open, call (626) 649-4572 and a live person will answer, day or night.

Call (626) 649-4572

Larkspur is a small city with two very different gate environments. The canyon side stays wet under redwood shade; the bay side eats mild steel with salt air. We know which side you’re on because we work both every week, and that shapes the parts we carry and the fixes we recommend. More on that below.

Why Latch & Post Gate Repair Is Larkspur’s Preferred Gate Repair Company

Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, and we’ve focused on gates only since 2009. That narrow focus means our technicians have seen the exact failure patterns that repeat across Larkspur: the rust-seized hinge post on a Baltimore Canyon cottage gate, the corroded operator board on a Corte Madera Inlet-facing driveway, the binding swing arm on a 12% grade. When a Gate Repair call comes in from Larkspur, we already know which questions to ask before the truck moves.

We carry stainless hinge pins, galvanized post bases, and sealed operator boards on our trucks specifically because Larkspur’s two micro-climates demand them. A shiny zinc-plated hinge that holds up fine in San Rafael will start flaking within eighteen months on a bay-side Larkspur fence. We don’t install that hardware here. Every technician is background-checked, wears a uniform, and follows the Cedarwell C.A.R.E. values on every visit: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work.

Every job, whether it’s a simple latch swap or a full commercial gate rebuild, is covered by the 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fine print.

Gate Welding in Larkspur

Gate welding in Larkspur is often the difference between a hinge post that lasts five years and one that fails in two. The salt-laden air near the Corte Madera Inlet and the steady damp under the redwood canopy both attack mild steel, and a welded repair done with the right rod, the right joint prep, and the right finish holds up where a bolted patch will not. Most welded hinge-post repairs on residential gates here run $220 to $480, and a full weld-and-reinforce job on a large driveway gate runs $450 to $900.

Hinge and post restoration

When a gate sags and drags on the strike side, the hinge post is usually the root cause. A thinned or cracked weld at the hinge barrel allows the leaf to drop, so the latch no longer lines up. We cut out the failed weld, clean the base metal back to bright steel, weld with a rod matched to the post material, and refinish with a zinc-rich primer before painting. On bay-side Larkspur properties we also replace the fasteners with stainless, because the original zinc hardware is nearly always the first thing to let go.

Frame and panel reinforcement

Older wooden gates in Old Town Larkspur often have steel frames behind the board face that rust from trapped moisture. The wood hides the damage until the gate is visibly out of square. We weld in replacement frame members, reinforce corners where the original welds cracked, and drill drain holes so water stops pooling inside the lower rail. That last step matters more in the canyon lots where the frame stays wet eight months a year.

Commercial Gate Repair in Larkspur

Commercial gate repair in Larkspur covers the automated sliding and swing-arm gates at the Larkspur Landing corridor, multi-family properties, and the private drives off Magnolia Avenue. These gates cycle hundreds of times a day, and the salt air on the bay side of town is hard on contactors, limit switches, and control boards. A commercial gate service call in Larkspur typically runs $350 to $1,100 depending on whether we’re replacing a safety edge, rebuilding a roller carriage, or swapping a DoorKing or BFT control board, and written pricing comes before any work begins.

Operator and control board service

Most commercial gate failures in Larkspur trace to a control board that’s been cooked by corrosion, a limit switch that’s no longer reading, or a safety loop that’s tripped. We service DoorKing, Elite, BFT, and Viking operators, and we stock boards and loop detectors locally so a commercial gate doesn’t sit open for a week. When the repair is done, we test the full open-close cycle and the safety reverse function before we leave.

Track, roller, and cantilever work

Sliding gates on bay-side commercial lots in Larkspur chew through steel rollers and track because the marine air pits the bearing surfaces. We replace worn rollers with sealed-bearing units, re-level track that has shifted in the fill soil near the inlet, and reweld cracked cantilever frames. The spec on the coast side is always stainless or galvanized hardware; painted steel parts come back to bite within a season or two.

Trusted Brands We Service in Larkspur

Our technicians are factory-trained on the brands Larkspur families and property managers actually use: DoorKing, Elite, Viking, and Ghost Controls, along with LiftMaster, FAAC, BFT, and Linear. We keep the common boards, remotes, photo eyes, and limit switches for these systems on our trucks and in local stock, which means a failing DoorKing operator on a Magnolia Avenue driveway gets diagnosed and repaired without waiting for a shipped part in most cases. When a Viking board corrodes out on a Corte Madera Inlet property, we can usually swap it same visit because we anticipated the failure mode. That’s the value of working every week in Larkspur rather than driving in cold from another county.

Common Gate Repair Problems We See in Larkspur Homes

• Rust-seized hinge pins and latches on bay-side lots. The marine air off the Corte Madera Inlet pits zinc-plated hardware fast, and the first symptom is a gate that groans and then stops latching. Stainless hardware is the fix, not a bigger keypad.
• Rot at the hinge post base on canyon-side wood gates. Redwood shade in Baltimore Canyon keeps the post bottom wet well into summer, and the rot starts underground before the panel shows any trouble. We dig, reset, and treat the footing when we rebuild.
• Binding swing arms on steep driveways. Larkspur’s canyon lots often run 10-15% grades, and standard articulated swing-gate arms bind at the end of the travel arc. The operator keeps pulling and the hinge post keeps taking the stress until something fails.
• Corroded operator control boards near the inlet. Salt air infiltrates the enclosure seals, and the board inside oxidizes until the gate stops responding to remotes or opens on its own. Sealed enclosures and conformal-coated boards are the coastal spec that lasts.

Key takeaways: Larkspur gate failures split along a micro-climate line: damp rot in the canyon, salt corrosion near the bay. Hardware and operator spec should match which side of the city you’re on. Steep driveways change the operator configuration that actually works. Written pricing and the 365-Day Done Right Promise come with every Larkspur job.

Pricing for Gate Repair in Larkspur, CA

We Also Serve Cities Near Larkspur

Our Gate Repair in Larkspur coverage extends to the surrounding Marin communities, including Kentfield, Corte Madera, San Rafael, and Mill Valley. If your home sits near the city line or your property manager has gates across several Marin addresses, we can handle all of them on one service route. The same written pricing, clean-up routine, and 365-Day Done Right Promise applies everywhere we work.

FAQs About Gate Repair in Larkspur