Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lake Worth
A gate that won’t close in Lake Worth isn’t a small thing. It leaves your yard open to the street, your dog on the wrong side, and your kids one push away from the road. Most gate repairs we handle in Lake Worth are completed the same day we arrive, with a written price in your hand before any tool comes out of the truck. Call Latch & Post Gate Repair at (626) 649-4572 and a live person picks up, any hour, any day.
We know Lake Worth because we work the streets along Roberts Cut Off Road, Marine Creek Parkway, and the older shoreline blocks where every gate seems to have its own history. That local familiarity matters when a 1965 hinge post has drifted off plumb or a lake-wind-corroded actuator housing won’t respond. We don’t guess. We look, we measure, and then we tell you the honest number.
Key takeaways:
- Most gate repairs in Lake Worth run between $145 and $680 depending on the job, and you’ll see the exact price in writing before we begin.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators.
- Shoe covers and drop cloths go down on every visit, and you get a photo of the cleanup before we leave.
- Every repair carries the 365-Day Done Right Promise.
Why Latch & Post Gate Repair Is Lake Worth’s Preferred Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, founded in 2009 and focused on one trade: gates. Not fencing, not general contracting, gates. Every gate comes down to two parts – the latch that holds it and the post that carries it. That’s the job we focus on.
Lake Worth homeowners call us because we treat the inside of the house with the same care as the gate outside. Our background-checked, uniformed technicians put on shoe covers at the door, lay drop cloths where they’ll be working, and choose pet-safe lubricants where there’s a choice. We can schedule around nap time if quiet matters to your household. Those are the Cedarwell C.A.R.E. values in practice: Clean up like it is our own home; Ask before we move or touch anything; Respect the family’s time and quiet hours; Explain the price before the work.
Call volume in Lake Worth skews toward older installations – gates hung in the 1960s and 1970s that have never been re-set, operators with control boards long out of production, and steel panels carrying decades of reservoir humidity. That’s the work our team knows best. Scheduling is coordinated from the DFW office, and our crews serve Lake Worth locally, so the tech who arrives has likely driven your street before.
Metal Gate Repair in Lake Worth
Metal Gate Repair in Lake Worth usually means tubular steel or wrought iron from the 1960s and 1970s, often original to the era when lakeside cabins became year-round homes. Seized hinges, pitted frames, and sagging panels are the default calls, and they come faster here because Lake Worth’s position along the reservoir shoreline keeps moisture in the air and against the metal nearly all year. A hinge replacement on older shoreline streets frequently turns into a post re-set once we see how far the footing has migrated in the black gumbo.
Most metal gate repairs in Lake Worth land between $185 and $520, hinge replacements generally run $145 to $340, and a post re-set with fresh concrete typically falls in the $350 to $680 range. You’ll see the exact figure in writing before we touch anything.
Hinge and Post Repair
On Lake Worth’s older lakefront streets, many gate posts were set directly into the ground with no concrete footing at all. Tarrant County’s expansive clay – the black gumbo local builders talk about – heaves and settles with every wet-dry cycle, and the posts walk. Sometimes a few inches. Sometimes enough to bind an operator so badly the safety photocell trips mid-travel. We pull the post, pour a proper footing, re-set and re-plumb it, then re-hang the gate so it swings true. Skipping the post re-set just means another call next season.
Weld and Rust Repair
Lake-wind-driven humidity accelerates rust on metal gates faster than you’d see a few miles inland in White Settlement or Sansom Park. We grind out pitted sections, weld in fresh steel where the frame is still sound, and treat the repaired area to slow the next round of corrosion. Where the frame itself is compromised through too many sections, we’ll tell you straight if replacement is the cheaper answer over the next five years.
Wood Gate Repair in Lake Worth
Wood Gate Repair in Lake Worth often involves gates built during the cabin-conversion years, when cedar and redwood panels were hung on simple steel posts and expected to last a decade, not six. Moisture from the reservoir has warped stiles, pulled hinge screws loose, and rotted rail ends. The repair usually starts with pulling the gate off its hinges, straightening or replacing the frame members, and re-hanging it with hardware sized for the actual weight of the wood.
Wood gate repairs in Lake Worth typically run $165 to $420 for sag correction, rail replacement, and re-hang work. Full frame rebuilds on larger double gates can reach $550 to $780. The written price comes before any work starts.
Sag Correction and Realignment
A wood gate sags because the diagonal bracing has failed or the hinges were undersized from the start. We re-set the brace, replace hinge hardware where it’s wallowed out the screw holes, and bring the leaf back to level so the latch actually aligns. On gates near the lake, we’ll also check whether the hinge post is part of the problem – a post that’s moved in the clay will un-align a wood gate just as fast as it will a steel one.
Latch and Lock Replacement
Wood gates on older Lake Worth properties often carry latch hardware that’s been patched and re-patched over the years. We replace the latch and strike with hardware rated for exterior exposure, and we’ll tell you the dollar range before we commit. A standard latch-and-strike replacement on a wood gate in Lake Worth generally runs $120 to $260.
Trusted Brands We Service in Lake Worth
We’re factory-trained on the operators Lake Worth families actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For the older Vector and pre-UL 325 Linear units still running on shoreline properties, we can often retrofit a modern control board and safety edges rather than replacing the whole operator – and when a retrofit doesn’t make financial sense, we’ll walk you through the replacement numbers honestly. Common replacement parts for Linear, Viking, and Ghost Controls units ride on our trucks when we dispatch to Lake Worth, which means fewer return trips and a faster resolution for your gate.
Common Gate Repair Problems We See in Lake Worth Homes
- Seized hinges on 1960s and 1970s tubular steel gates. Years of lake-wind humidity pitting the steel and corroding hinge barrels until the gate barely moves. This corrosion runs noticeably slower a few miles inland where the air isn’t carrying reservoir moisture.
- Posts set straight into the ground, no footing, now leaning. Black gumbo clay heaving and settling through North Texas wet-dry cycles has pushed these posts several inches off plumb over the decades. A leaning post binds automated openers and throws the latch out of alignment until the post is re-set.
- Obsolete operator control boards on pre-UL 325 installations. Gates hung before modern safety requirements often run boards that are no longer manufactured. We can frequently retrofit a current board and add safety edges without pulling the whole operator, but we’ll tell you when replacement is actually cheaper.
- Ice storm damage from DFW winter events. When an ice storm rolls through every few years, water gets into old hinge welds, freezes, and snaps them clean. Electric gate operators freeze solid overnight on original-to-conversion-era installations with no maintenance history.
Pricing for Gate Repair in Lake Worth, TX
Here are real numbers for the Lake Worth market, so you know what to expect before you call. Hinge repair and re-alignment on a single gate: $145 to $340. Post re-set with concrete footing: $350 to $680. Weld and rust repair: $185 to $520. Wood gate sag correction and re-hang: $165 to $420. Electric operator control board retrofit: $240 to $510. Full operator replacement: $680 to $1,400 depending on brand and horsepower. Every visit includes the written price before any work starts, and the 365-Day Done Right Promise backs every repair. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Lake Worth
While this page is written for Lake Worth homeowners, our crews also run Gate Repair calls throughout the metro. We serve Gate Repair in Lake Worth, plus Dallas, Fort Worth, Houston, and San Antonio through the Cedarwell family network. If you’re calling from one of those cities, the same written-price rule and cleanup standard apply.
Serving Lake Worth, TX - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lake Worth
Sometimes yes, sometimes no. If the hinge post is solid and plumb, a hinge replacement on a sagging gate in Lake Worth runs $145 to $340 and can usually be done the same day. But on older shoreline properties where the post was set without a concrete footing, the post itself has likely moved in the black gumbo clay, and replacing only the hinges won’t fix the bind. We’ll tell you which situation you have before we quote anything. Call (626) 649-4572 and we’ll come look.
The lake itself. Lake Worth’s position along the reservoir means higher baseline moisture in the soil and lake-wind-driven humidity against your gate year-round, so hinge corrosion and post migration happen faster and hit harder than a few miles inland. Gates in White Settlement and Sansom Park, sitting higher and further from the water, don’t see posts walk off plumb at the same rate we see on shoreline streets.
Many pre-UL 325 operators in Lake Worth can be retrofitted with a modern control board and current safety edges for roughly $240 to $510. If the motor or gearbox is also worn, a full operator replacement at $680 to $1,400 may be the cheaper long-term answer. We’ll show you both numbers in writing and let you decide with no pressure.
Legally, an existing gate installed before UL 325 standards doesn’t have to be torn out and replaced just because newer standards exist. Practically, older gates without current photoeye safety edges or entrapment protection are worth upgrading, especially with kids and pets in the yard. We can often add the safety components without replacing the whole operator, and we’ll tell you the honest cost before any work begins.
Ice storms hitting the DFW area freeze water that has crept into old hinge welds and operator housings, and the expansion fractures the metal or seizes the internal gearbox. On Lake Worth’s older gates, that damage often shows up on original-to-conversion-era installations with decades of minimal maintenance. We can usually diagnose the failure on the first visit and give you a written price to repair or replace. Call (626) 649-4572 anytime – a live person answers.
If you’re in Lake Worth and your gate won’t latch, your operator’s binding, or a post has drifted out of plumb, call (626) 649-4572 for a free estimate. We’ll send a uniformed tech who puts down drop cloths, wears shoe covers, explains the price before any work starts, and leaves you a photo of the cleanup. That’s the standard on every job.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family serving Lake Worth since 2009.