Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across La Porte
Gate repair in La Porte usually runs between $185 and $480 for most residential fixes, and we can typically have a technician at your door the same day you call. Salt air off Galveston Bay corrodes hinges, rollers, and operator boards faster here than almost anywhere else in Harris County, so the fix that works in Baytown won’t always hold up on Bayshore Drive. We know the difference because we work these streets every week. If your gate is sagging, stuck, or the opener just quit, call (626) 649-4572 and a live person will answer, day or night.
Why Latch & Post Gate Repair Is La Porte’s Preferred Gate Repair Company
Latch & Post is part of the Cedarwell family of independently owned gate specialists, and we’ve been doing this work since 2009. Our Gate Repair team is built around one idea: every gate comes down to two parts, the latch that holds it and the post that carries it. Get those right and everything else follows.
La Porte homeowners call us because we show up with a written price before any work begins, and we treat your house the way we’d treat our own. Shoe covers go on before we step inside. Drop cloths go down under every work area. When we leave, we take a photo of the cleanup so you can see what we did and how we left it. That’s the Cedarwell Care Promise, and it’s included on every single visit, not as an upsell.
Our technicians are background-checked and uniformed, and they’re factory-trained on the brands families around Lomax and Bay Forest actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Every repair and installation is covered by our 365-Day Done Right Promise. If it’s not right, we make it right. No argument.
When you call, you get a person. Not a voicemail, not a callback queue. Nights, weekends, holidays, it doesn’t matter. We answer.
Sliding Gate Repair in La Porte
Sliding gate repair in La Porte typically costs between $240 and $520 depending on what’s failed. Sliding gates are common here because they work well on properties with sloped driveways or limited swing clearance, and in industrial-facing areas where a big swing gate would block traffic. The problem in La Porte is that slide gate tracks and rollers sit low to the ground, right where salt-laden moisture collects. A galvanised track will last a few seasons near the bay; a marine-grade stainless track will last far longer.
Track Alignment and Roller Replacement
When a slide gate starts shuddering or binding, the first thing we check is track plumb and roller wear. In neighborhoods like Bayshore, corrosion on the roller bearings causes the gate to drag, which makes the operator motor work harder until it overheats and trips its thermal protection. We replace worn rollers with sealed stainless units and realign the track so the gate rolls without strain.
Operator Strain From Corrosion
A slide gate operator in La Porte often fails because it’s been fighting corrosion for a year before the board gives out. We check amperage draw during operation, and if the motor is pulling more than the spec sheet says it should, we find the mechanical drag and fix it before replacing the board. Otherwise you’re paying for a new board now and another one in two years.
Wrought Iron Gate Repair in La Porte
Wrought iron gate repair in La Porte usually falls between $200 and $550, and the work here is different from inland Houston because the failure starts at the hinge post, not the panel. Wrought iron is gorgeous and it’s what most of the older ranch homes in Lomax and Bay Forest have on their driveway entrances, but the salt air coming off Galveston Bay finds every bare weld and every unpainted hinge pin. Once rust gets into a weld, the panel sags and starts dragging on the slab.
Hinge Post Resets and Weld Repair
In this part of Harris County, the soil is expansive clay, and many of those 1970s through 1990s homes have gate posts set in shallow slab footings or pier-and-beam setups that shift with every wet-dry cycle. When the post moves, the gate sags. When the gate sags, the welds at the hinges crack. We reset and re-pour post footings, then grind out and re-weld the hinge points using stainless fixings so the repair outlasts the original.
Rust Treatment and Marine-Grade Coating
Bare steel oxidizes fast close to the bay. We treat surface rust, repair any structural compromise, and apply a marine-grade coating that’s rated for coastal exposure. It costs a bit more than standard enamel, and it’s worth it on any gate within a mile of the water.
Trusted Brands We Service in La Porte
We stock parts for the operators La Porte homeowners and facility managers actually run. That includes FAAC, BFT, Linear, and Viking, along with the bigger residential names like LiftMaster and Ghost Controls. Because we carry marine-rated enclosures and stainless hardware as routine inventory, not special orders, we can usually complete a repair on the first visit instead of scheduling a follow-up for parts. If your gate’s brand isn’t on the list, call us anyway and we’ll tell you straight what we can and can’t service.
Common Gate Repair Problems We See in La Porte Homes
- Salt-corrosion on hinges and rollers: Bay-facing streets like those off Bayshore expose bare steel to salt-laden air year-round. Hinges bind, rollers seize, and the operator strains until something fails.
- Post shift from expansive clay soil: Neighborhoods like Lomax and Bay Forest sit on clay that swells and contracts with the seasons. Posts lean, gates sag, welds crack at the hinge point.
- Operator circuit boards shorted by salt-air infiltration: On the coast, we routinely see boards fail within 3 to 5 years. Marine-rated enclosures extend that substantially, and we stock them.
- Storm surge damage to gate-motor assemblies: Harvey in 2017 put entire operator assemblies underwater in low-lying La Porte neighborhoods. High winds also rack slide tracks out of plumb, and we see a surge of calls after every hurricane season.
Pricing for Gate Repair in La Porte, TX
A typical gate latch replacement in La Porte runs $120 to $240. Hinge repair or a single post reset falls between $200 and $400. Full sliding gate track and roller replacement runs $240 to $520. Wrought iron gate repairs, including weld work and rust treatment, fall between $200 and $550. Operator board replacement with a marine-rated enclosure usually lands between $350 and $650 depending on the operator. You’ll see the exact number in writing before we touch anything, and the price is agreed before any work starts. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near La Porte
Our La Porte service area extends to the neighboring communities we work in regularly: Deer Park, Baytown, Seabrook, and Channelview. If you’re in one of those cities and need gate work done, the same crew, the same written pricing, and the same 365-Day Done Right Promise apply.
Serving La Porte, TX - Our Local Coverage Area
We’re based in the La Porte area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in La Porte
The salt-laden air off Galveston Bay infiltrates operator enclosures and corrodes circuit boards, and we routinely see board failure within 3 to 5 years on bay-facing streets. Inland Houston operators typically last 8 to 12 years. The fix is a marine-rated enclosure with sealed connections, which we stock and install as a standard item here.
Look at the gap between the gate and the post at the top and bottom. If the gap is wider at the top, the post is leaning. If the gate itself is twisted or the welds are cracked, it’s the panel. In La Porte’s clay soil, post shift is the more common culprit, and fixing the panel without resetting the post means you’ll be fixing it again in a season or two. Call (626) 649-4572 and we’ll diagnose it in person.
You’ll mostly see wrought iron driveway gates on the older 1970s through 1990s ranch homes, along with chain-link gates on larger lots and sliding gates on properties near the industrial corridor. The wrought iron work in these neighborhoods is often original to the home, which means the hinge posts are getting to the age where footing and weld work become the priority.
Yes. Any automated gate in La Porte must have functioning entrapment protection, including photo eyes or contact edges, and the operator must reverse on contact. We check the safety edges and photo eyes on every automatic gate repair we perform, and we won’t leave a gate operational without them working correctly.
Yes. La Porte sits alongside the Houston Ship Channel’s petrochemical corridor, and we service the high-cycle automated gate systems at industrial and commercial sites as well as residential driveway gates. The same background-checked technicians handle both, and the same written pricing applies before any work begins.
If your gate is sagging, stuck, or the operator won’t respond, call (626) 649-4572. A live person answers, the estimate is free, and you’ll get a written price before any work starts.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family of gate specialists since 2009.