Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keller
Most gate repairs in Keller come down to one of two things: the post has moved, or the operator has quit. We fix both, usually in one visit. The black gumbo clay under Keller swells and shrinks with every rain and drought cycle, slowly pushing gate posts out of plumb. That’s why sagging gates are as common a call here as dead control boards. If your gate drags, won’t open, or groans when it moves, call Latch & Post Gate Repair at (626) 649-4572. We’ll give you a written price before we touch anything.
Why Latch & Post Gate Repair Is Keller’s Preferred Gate Repair Company
We work a lot of gates in Keller, and the routes tell a story. One stop is a 14-foot galvanized pipe gate on Bear Creek Road. The next is a wrought iron swing gate in a subdivision off Keller Parkway built in 2003. Same zip code, completely different gate. That’s Keller, and we’ve learned to read the difference in the first five minutes.
Every Latch & Post technician is background-checked and uniformed, and follows the Cedarwell C.A.R.E. values on every visit. That means shoe covers and drop cloths before we walk through your house to the backyard gate, a cleanup photo before we leave, and a written price before any work starts. Cody Beckman leads our team, and the standard he set is simple: clean up like it’s our own home. Keller homeowners notice, and they say so in reviews. We carry parts for the brands families here actually own, which means fewer second trips.
And when your gate is stuck at 7:00 a.m. on a school morning, a live person answers our phone. Not a queue. Not an answering service. We’re available 24/7, and the 365-Day Done Right Promise covers every repair we make in Keller. If it’s not right, we make it right.
Sliding Gate Repair in Keller
Sliding gate repair in Keller usually means one of two jobs: a roller truck that’s flattened or seized, or a track that’s been bent by a shifting post. On the acreage lots off Bear Creek Road and along Rufe Snow Drive, heavy galvanized sliding gates ride on steel wheels that wear down against concrete pads. When the black clay shifts the post even half an inch, the gate stops rolling true and starts binding. A typical sliding gate roller replacement in Keller runs $180-$340, and sag correction on a wide farm slider runs $250-$450 depending on the span and how far the post has moved.
Roller and Track Work
Keller’s freeze-thaw cycles do real damage to sliding gate hardware. Ice forms in the track, and when the gate moves, something has to give. Usually it’s the roller bearings. We replace worn rollers, shim the post back to plumb, and re-set the travel stops so the gate closes flush without slamming.
Solar Power for Long Driveways
Many Keller sliding gates sit too far from the house for a mains power run to make sense. On those lots we install solar gate openers with a charge controller and battery bank. The operator runs on DC, the panel keeps the battery topped, and you get keypad and remote entry without trenching wire across three acres.
Wrought Iron Gate Repair in Keller
Wrought iron gate repair in Keller is largely about the late-1990s and early-2000s building boom. Production builders put ornamental iron swing gates on hundreds of homes in the subdivisions off Keller Parkway, and those gates are now 20 to 30 years old. Hinges are wallering out, weld joints are cracking at the corners, and the iron is rusting at the base where sprinkler water hits it. A standard hinge replacement on a Keller wrought iron gate runs $160-$280. Full sag correction with post re-setting runs $350-$600 when the post has heaved out of plumb.
Rust Repair and Recoating
Keller’s summer humidity and the alkaline black clay both work against wrought iron. The bottom rail rusts first, right where the gate clears the ground. We grind out the rot, weld in new steel, and recoat the patch so it blends. Then we adjust the gate height so it doesn’t drag through wet grass and repeat the damage.
Scrollwork and Pickets
When a Keller iron gate gets hit by a car or a kid’s go-kart, the pickets bend and the scrollwork pops loose. We straighten what’s salvageable and weld-replace what isn’t. The goal is a gate that looks continuous, not patched. Most homes here have matching gate and fence panels, so we match the existing picket spacing and scroll radius.
Trusted Brands We Service in Keller
We’re factory-trained on the operators Keller homeowners actually have: FAAC, BFT, Linear, and Viking, plus Ghost Controls, DoorKing, Elite, LiftMaster, and Mighty Mule. We stock common replacement parts locally, including discontinued Linear and Viking control boards that a lot of other companies won’t bother carrying anymore. That matters when your 1998 Linear board dies and the gate won’t budge. Instead of waiting a week for a part, we often have the board or a compatible replacement on the truck. For Keller’s blend of older iron gates and newer acreage tube gates, that local parts stock means fewer return visits and a gate that works when we leave.
Common Gate Repair Problems We See in Keller Homes
- Black gumbo clay heaving the hinge post. The expansive clay under Keller swells with spring rain and shrinks hard in summer drought. The post moves, the gate sags, and the latch no longer lines up. Fixing the panel without re-setting the post means paying for the same repair twice.
- Winter ice cracking operator housings. Keller sits slightly higher than Fort Worth proper, so ice storms hit a little harder here. Freeze-thaw stress cracks plastic operator housings and freezes hydraulic actuators on gates that were never designed for our winters.
- Discontinued control boards on 1990s-2000s automatic gates. Mid-era GTO/Linear and Viking boards are no longer manufactured. When one dies, a homeowner is stuck with a gate that won’t open until someone finds a replacement. We keep those legacy parts in local stock specifically because they’re so common in Keller’s established subdivisions.
- Wide farm gates sagging at the corner post. On 1-acre-plus lots along Bear Creek Road, heavy galvanized pipe gates hang on corner-post hinges that take enormous leverage. A 14-foot gate puts thousands of pounds of force on the post every time the wind blows. Sag correction and post re-setting are routine calls here.
Pricing for Gate Repair in Keller, TX
Keller gate repair pricing breaks down predictably because we work on the same gate types week after week. A standard latch or hinge replacement runs $160-$280. Sliding gate roller work runs $180-$340. Sag correction with post re-setting runs $250-$600 depending on gate span and how far the post has moved. Solar operator installation on rural lots typically starts around $1,400 for the package including panel, battery, and keypad entry. The price you’re quoted is the price you pay. Every visit includes a written quote before work begins, and our free estimate comes with the same no-pressure approach.
We Also Serve Cities Near Keller
Our Keller crews also cover Haslet, North Richland Hills, Roanoke, and Southlake. If you’re in one of those cities, we’ll bring the same local parts stock and the same written-price guarantee. Learn more about our Gate Repair service and what we do across the metro.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Keller
Because the hinge post is moving in the black gumbo clay, and until the post is re-set the gate will keep sagging. Keller’s expansive clay swells and shrinks with every wet-dry cycle, and a post set in the 1990s has been through hundreds of those cycles. At Gate Repair in Keller, we check the post first on every sagging gate call. If it’s merely loose hardware, we tighten and adjust. If it’s structural, we re-set the post footing and only then correct the gate. Call (626) 649-4572 to have us look at it – the estimate is free.
Yes. Solar gate openers are the standard fix on Keller acreage lots along Bear Creek Road and similar corridors where running conduit to the gate would mean trencing hundreds of feet. We install a solar panel, charge controller, and battery bank matched to the gate’s weight and duty cycle. We also add keypad and remote entry so you don’t have to walk the length of a long driveway twice. Call (626) 649-4572 to discuss your gate and get a written price.
In most cases, yes. We stock discontinued Linear, GTO, and Viking control boards specifically because they’re so common in Keller’s 1990s-2000s subdivisions. If we don’t have the exact board, we’ll quote you a compatible current replacement and explain the difference before any work starts. The 365-Day Done Right Promise covers the repair either way. Call (626) 649-4572 and we’ll identify the operator over the phone.
An automatic gate is safe when the safety edges and photocells are working, the travel stops are set correctly, and the operator reverses on contact. We inspect all three on every automatic gate repair in Keller. If a safety edge is cracked or a photocell is misaligned, we tell you and quote the fix in writing. These are the parts that protect kids and pets, and we don’t skip them to save a few minutes. Call (626) 649-4572 for a safety check.
Yes. Keller’s housing stock spans 1-acre horse lots with galvanized pipe gates and deed-restricted subdivisions with ornamental iron swing gates, and we work on both every week. The repair approach is different: pipe gates usually need hinge post re-setting and sag correction, while iron gates need weld repair and rust treatment. We scope the right repair based on what’s actually on your property. Call (626) 649-4572 and we’ll come take a look.
Contact Latch & Post Gate Repair in Keller
If your gate is sagging, stuck, or stopped opening entirely, call us at (626) 649-4572. A live person answers, day or night. We’ll schedule a visit, show up with shoe covers and drop cloths, hand you a written price before any work starts, and leave your Keller home clean. Every repair is backed by the 365-Day Done Right Promise. If it’s not right, we make it right.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Keller and the surrounding North Texas communities.