Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Houston
Gate repair in Houston comes down to one thing most companies miss: the soil under the post. Black gumbo clay swells with every heavy rain and shrinks during dry spells, tilting posts until gates bind, sag, or refuse to latch. That’s the first thing our technicians check on any Houston call, before touching a hinge or an operator. We serve the full metro area from our Houston office, and when your gate won’t close or your automatic opener is dead after a storm, call (626) 649-4572 and a live person answers, day or night.
If you’re searching for Gate Repair that actually holds up to Houston’s climate, you’ve found the right specialist. Latch & Post Gate Repair focuses on gates only. We’re not a general handyman service. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on, and that’s why our repairs stay fixed through the next rainy season.
Why Latch & Post Gate Repair Is Houston’s Preferred Gate Repair Company
Houston homeowners call us because we do the unglamorous work first: checking post plumb, examining footings for movement, and looking at how storm water has been flowing past the gate. Most gate companies in Houston start with the operator. We start with the ground. That approach prevents a brand-new motor from being bolted to a post that’s already leaning off vertical.
Cody Beckman leads our Houston team, and he trains every technician on the brands Houston families actually own, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate drags after a rain or your keypad stopped working after a power surge, we’ll find the cause in the first visit. And every job is covered by our 365-Day Done Right Promise. If it isn’t right, we make it right.
We also follow the Cedarwell Care Promise on every single visit. That means a written price before any work begins, shoe covers and drop cloths before we step inside your home, and a photo of the cleanup before we leave. We respect your floors, your pets, your sleeping kids, and your quiet hours. That’s the standard Cody Beckman expects on every Houston job, from a driveway gate in Katy to a wrought-iron pedestrian gate in The Heights.
Wrought Iron Gate Repair in Houston
Wrought iron gate repair in Houston usually involves a post that’s moved, a hinge that’s seized, or rust that’s eaten through a bottom rail. Houston’s humidity runs above 75% most of the year, and with about 50 inches of annual rainfall, exposed iron corrodes much faster here than in Dallas or San Antonio. We don’t just patch rust. We cut out the damaged section, weld in new material, grind it smooth, and protect the repaired area so the gate isn’t back in the same condition next spring.
Hinge and Post Alignment on Older Iron Gates
In neighborhoods like The Heights and Montrose, ornamental wrought-iron gates often hang from brick or wood posts that were set decades ago. The soil has moved since then. We remove the gate, reset or replace the post footing as needed, and re-hang the panel so it swings evenly and latches cleanly. Typical hinge and post alignment work in Houston runs $220-$480, depending on how far the post has shifted and whether the footing needs new concrete.
Rust and Weld Repair for Houston Ironwork
Houston’s near-coastal air means rust isn’t cosmetic. It’s structural. A bottom rail that looks fine from the driveway can be paper-thin where sprinkler overspray hits it every morning. We grind back to clean metal, weld in new steel where the section is compromised, and prime and paint to match. Most rust and weld repair jobs in Houston cost between $180 and $390, and you’ll see the exact price in writing before we touch anything.
Metal Gate Repair in Houston
Metal gate repair in Houston spans two worlds: steel driveway gates on automatic operators and lighter aluminum or steel pedestrian gates around the side of the house. Aluminum corrodes less than raw steel, but its welds fail under repeated wind loading, which Houston gets constantly, especially from Gulf-origin storms and afternoon thunderstorms that roll through from the northwest. A metal gate that rattles loudly in the wind usually has a broken weld or a hinge that’s pulling out of the post. Left alone, the panel can drop and bend, or tear the operator bracket off the gate.
Slide Gate Track and Roller Repair
When a slide gate grinds and stops halfway, the problem is almost always the rack and pinion or the rollers. Houston’s rain washes silt and fine sand into the roller channel, and in older communities that grit accelerates wear on the nylon rollers and the steel rack teeth. We clean the track, replace worn rollers, adjust the rack alignment, and set the travel limits so the gate runs quiet again. Houston slide gate roller and rack repairs typically run $240-$620.
Wind-Load Bracing and Reinforcement
Solid infill gates, the ones with vertical slats or solid panels, catch wind like a sail. During Houston’s severe thunderstorms and tropical weather, that wind load flexes the panel and pulls on the hinge welds and the post base. We can add bracing behind the face panel, reinforce the hinge mounting, and check that the post footings are deep enough for the panel size. Wind-load reinforcement in Houston runs $180-$460, and it’s one of the most common preventive repairs families request after a stormy season.
Trusted Brands We Service in Houston
We’re factory-trained on the brands Houston homeowners actually have on their properties. LiftMaster for the hundreds of thousands of residential operators across the metro, plus FAAC and BFT on many higher-end swing systems, and Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule across sliding and solar gate setups. We stock common local parts and control boards for these brands in Houston, which means shorter repair times, especially after a storm when everyone needs a replacement loop detector or a new operator arm at the same time.
Common Gate Repair Problems We See in Houston Homes
- Post movement from black gumbo clay. A hinge post set perfectly vertical after a wet spring can lean an inch or more off plumb by late summer. The gate then drags on the driveway or won’t reach the latch, even though every mechanical part is fine.
- Rust and corrosion from Gulf humidity. Hinges, rollers, latches, and operator mounting brackets rust out far sooner in Houston than inland Texas. Near-coastal moisture and sprinkler overspray work together to eat through steel faster than most homeowners expect.
- Flooded operators and control boards. Severe weather, including the catastrophic flooding from Hurricane Harvey in 2017, regularly submerges automatic gate operators at or below grade. Motors, loop detectors, and safety photocells fail and need full replacement.
- Wind damage to solid gate panels. Houston’s frequent thunderstorm winds load solid infill gates and bend hinges, snap weld joints, and crack post footings. Many of these failures show up weeks after the storm as a gate that suddenly won’t latch or swings crooked.
Pricing for Gate Repair in Houston, TX
We believe in real numbers, not vague estimates. Most standard gate-latch replacements in Houston run $120-$240. Hinge and post realignment work runs $220-$480. Rack and pinion repairs on slide gates run $240-$620, and a full operator replacement after flood damage typically starts around $600 and goes up based on the brand and control board configuration. What affects the cost is the size of the gate, the condition of the posts, and how much rust or wind damage must be undone before the repair can start. Every visit includes a written price before any work begins, with no pressure to accept. Call (626) 649-4572 and we’ll give you an honest range for your specific Houston gate.
We Also Serve Cities Near Houston
Our Houston team also travels to Galena Park, Pasadena, Channelview, and South Houston, so if you’re just outside the city limits and your gate stopped latching after the last rain, we can schedule you this week. For more on our full service area, see Gate Repair in Houston and our nearby coverage.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Houston
Pull the manual release handle on the operator, usually a red or yellow cord or lever near the motor, to disengage the gate from the drive mechanism so you can open it by hand. But check the gate’s swing path before you release it; a wind-damaged panel can swing free and injure someone. If the gate feels heavy, won’t move, or the post is visibly leaning, stop and call us. This is one situation where a trained Houston technician should inspect the gate before anyone forces it. Call (626) 649-4572 and we’ll walk you through it on the phone.
Because lubricating the hinges doesn’t fix a post that’s moved. Houston’s black gumbo soil swells with rain and shrinks in dry heat, and that movement tilts hinge posts until the gate panel drags on the driveway or the latch no longer lines up. The fix is re-plumbing the post and resetting its footing, not adding grease. In a typical Houston repair, we reset the post at the correct depth and re-hang the gate so it clears the ground by a consistent margin all year round.
If floodwater reached the circuit board or the motor windings, replacement is almost always the only safe repair. Houston’s wet conditions mean a dried-out control board can work for a few weeks and then fail again from corrosion inside the connectors. We can often keep the existing gate and mounting, but the operator, board, and safety photocells should be replaced. We’ll give you a written price for the full job before any work starts.
That grinding sound is usually worn teeth on the rack, a misaligned pinion gear, or sand and grit packed into the rack from Houston’s heavy rain washing debris across the driveway. The opener keeps pushing while the teeth slip, which can bend the rack further and burn out the motor. We clean the rack, replace worn sections, realign the pinion, and test the travel limits so the gate runs smoothly. Houston slide gate rack repairs run $240-$620, and the exact number appears on your written quote.
Yes. Automatic gate operators must have a working safety system, usually photocells across the gate path and often pressure edges on the gate itself, to keep the gate from closing on a person, a pet, or a car. Any UL 325 compliant operator requires these devices, and after a storm or flood, those photocells are often the first thing to fail. We test every safety device as part of every Houston gate repair, and we won’t leave a gate running without them. Call us at (626) 649-4572 and we’ll schedule your inspection.
In the Heights, a homeowner’s wrought-iron swing gate had been dragging on the driveway for weeks. The panel checked out fine, but the hinge post had tilted nearly two inches off plumb as the gumbo shifted, and a corroded LiftMaster operator bracket had also pulled loose from the wet footing. We reset the post footing, re-plumbed and re-hung the gate, replaced the bracket, then cycled the keypad entry and safety photocell until the gate latched cleanly every time. That’s the typical Houston gate repair: the ground moved first, everything else followed.
Get Your Houston Gate Working Again Today
Whether your gate has been dragging for weeks, a storm killed your operator, or the latch stopped catching after the last dry spell, we’ll send a background-checked, uniformed Houston technician to diagnose the problem and give you an honest, written price before any work starts. We answer our phones around the clock, every day, with a live person. Call (626) 649-4572 for your free Houston gate repair estimate, and we’ll take it from there. Shoe covers on, drop cloths down, and your floors stay clean.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Houston from our local office.