Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Highland Village
Highland Village gates fail on a schedule set by Lake Lewisville and Denton County clay. A driveway gate that opened smoothly last fall can drag and grind by late spring, not because the operator wore out, but because shoreline moisture and soil heave worked on the post and the control board at the same time. That’s the repair we do most often here. We’re Latch & Post Gate Repair, and our technicians know the lakeside drives off Highland Village Road, the custom-home gates along Stonebridge and Castlewood, and the underground operators tucked into the estates near Pilot Knoll Park. If your gate is binding, grinding, or refusing to open, call (626) 649-4572 and a live person will answer, day or night.
Why Latch & Post Gate Repair Is Highland Village’s Preferred Gate Repair Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, building Gate Repair on one promise: if it isn’t right, we make it right for a full 365 days. That promise matters in Highland Village, where custom ornamental gates and underground operators demand precision. Background-checked, uniformed technicians arrive with shoe covers and drop cloths, and they leave with a cleanup photo so you can see the floor stayed clean.
Our local reputation in Highland Village rests on two habits. First, a written price before any work starts, every visit, no pressure. Second, quiet care around kids and pets. We choose pet-safe lubricants and we can schedule around nap time. Cody Beckman leads our team, and he holds every technician to the Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work.
Driveway Gate Repair in Highland Village
Driveway Gate Repair in Highland Village usually means one of three things: a heavy custom gate that’s been dragged off its hinges by clay heave, a discontinued operator from the 1990s or 2000s that’s finally failed, or lakefront corrosion that’s eaten into a control board. We diagnose all three on the first visit. A typical hinge-and-post reset runs $240 to $480. Replacing a worn drive gear or rack on a swing gate runs $180 to $360. If the control board is corroded or shorted, replacement runs $350 to $800 depending on the brand. You’ll see the exact number in writing before we touch anything.
Post and Hinge Resets
On a hillside property above Lake Lewisville, the wet spring swells the black clay until a hinge post lifts a quarter inch out of plumb. That’s enough to drag a 400-pound ornamental gate against the drive. We knock the post back to true, re-set the footing, and shim only where the geometry actually calls for it.
Operator and Control Board Work
Many original operators from the late-1980s through 2000s build-out are discontinued. We source remainders or direct-fit replacements and wire them cleanly, then seal the board against the humidity that comes with living on the lake’s western shore.
Gate Welding in Highland Village
Gate Welding in Highland Village is not a patch job. The lake humidity here accelerates oxidation on ornamental iron, and we regularly find rust fracturing at the bottom rail where sprinkler spray and shoreline air meet the metal. We cut out the rotted section, weld in a replacement with matched profile, and prime and paint so the repair disappears. Welding repairs run $180 to $420 for a typical rail or picket repair. A full-bottom-rail replacement on a wide drive gate runs $350 to $750. We quote the exact number before striking an arc.
Rust Repair on Ornamental Panels
We’ll tell you honestly if a panel can be welded or if the rust has thinned the metal too far to hold a bead. If it can be saved, we weld it, grind it smooth, and match the finish so your gate keeps its original look.
Post Cap and Hinge Plate Welding
When a hinge plate starts to tear off a post, welding it back in place without rebuilding the post is the difference between a quiet gate and one that binds every summer. We weld the plate, re-align the gate, and check the full swing arc before we call it done.
Trusted Brands We Service in Highland Village
Our techs are factory-trained on the brands Highland Village homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common boards, gears, and safety edges for local turns, and for discontinued FAAC and BFT controllers we keep a network of remainders so a circuit board failure doesn’t force you into a full-operators swap unless you want one. We’ll tell you the straight answer either way.
Common Gate Repair Problems We See in Highland Village Homes
- Spring clay heave shifts hinge posts. Wet Denton County clay swells in March and April, lifting posts near the lake and dragging gate panels hard enough to strip drive gears before the panel shows any visible wear.
- Lake humidity shorts control boards. What looks like a mechanical fault is often a moisture-shorted board. Lakeside air corrodes terminals and traces on operators far faster than the inland DFW average.
- Discontinued operators from the custom-home build era. Homes built from the late 1980s through the 2000s often have operators no longer made. A routine repair can turn into a parts-sourcing call or a clean operator replacement.
- Rust fracturing at the bottom rail. Sprinkler overspray plus lakefront moisture oxidizes ornamental iron at the base channel, and one hard push sends a crack through the lower rail.
Pricing for Gate Repair in Highland Village, TX
You’ll get a written price before any work begins, every single visit, and that price is what you pay. A standard gate-latch or hinge replacement in Highland Village runs $180 to $420. Drive-gear replacement runs $180 to $360, a control board runs $350 to $800, and welding work runs $180 to $750 depending on the size of the repair. If the repair isn’t right, the 365-Day Done Right Promise means we make it right, no argument and no fine print. Call (626) 649-4572 for a free estimate and we’ll come measure, diagnose, and quote.
We Also Serve Cities Near Highland Village
Our Gate Repair in Highland Village team also handles gate work across the broader DFW region. We serve Houston, San Antonio, Dallas, and Fort Worth with the same written-price, clean-floor care on every job, scheduled from our Dallas-Fort Worth office.
Serving Highland Village, TX - Our Local Coverage Area
We’re based in the Highland Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Highland Village
Your gate is sitting on Denton County black clay that swells with spring rain, lifting the hinge post and dragging the panel against the drive. The operator wasn’t the weak point; the post was. The fix is a post reset and re-alignment, not a new operator. Call (626) 649-4572 and we’ll measure the post movement and give you a written price for the reset.
Yes. The constant lake-adjacent humidity puts oxidation stress on control boards, terminals, and exposed connectors that inland properties in Flower Mound don’t experience nearly as quickly. We seal boards and connections against that moisture and recommend an annual inspection before the humid season settles in.
In most cases, yes. We keep remainders and direct-fit replacements for the FAAC, BFT, Linear, and Viking boards that Highland Village homes older than 20 years commonly run. If a board can’t be sourced, we’ll tell you plainly and quote a clean replacement before any work starts.
Yes. Automated gates in Highland Village must have functioning entrapment protection, typically safety edges, photo eyes, or both, so they reverse if a child or pet is in the path. We check those on every automated gate repair call, and a failed safety edge is a quick, inexpensive fix.
Usually, yes. We cut out the rotted section, weld in matched-profile steel, and finish it to blend. If the rust has thinned the metal too far to hold a weld, we’ll tell you that too and give you an honest quote either way.
Written by Cody Beckman, Owner at Latch & Post Gate Repair. We’re part of the Cedarwell family of independently owned and operated gate specialists, serving Highland Village with a written price before every job, shoe covers and drop cloths on every floor, and a 365-day promise that it’s done right.