Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hayward
Gate repair in Hayward means dealing with two forces most cities never face at once: salt-laden fog off the Bay and a fault line that slowly tilts concrete footings. A gate that sagged last month isn’t a one-time fix here. It’s a symptom of something underneath. Our Gate Repair team works along Mission Boulevard, through downtown, and up into the Hayward hills, and we quote every job in writing before any work begins. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Hayward’s Preferred Gate Repair Company
We’re a Cedarwell-family gate specialist, not a general handyman, and we’ve been at this since 2009. Homeowners in Hayward call us because we name the exact problem in plain English, write down the price before we touch the gate, and clean up like it’s our own house. The C.A.R.E. values our technicians follow – Clean up, Ask before we move anything, Respect your time and quiet hours, Explain the price first – came from watching how families actually live. Kids nap. Dogs bolt through open gates. Floors show footprints.
We lay drop cloths on the floor and put on shoe covers before we step inside, and we send a photo of the clean-up before we leave. Those aren’t add-ons. They’re the job. And if the repair isn’t right, the 365-Day Done Right Promise means we make it right, no argument, no fine print. Hayward homeowners with 50-year-old wrought iron gates and 30-year-old automatic openers need a technician who knows both what failed and what Hayward did to it. That’s us.
Wrought Iron Gate Repair in Hayward
Wrought Iron Gate Repair in Hayward usually starts with a sag, a scrape, or a hinge that won’t hold tension no matter how many times you wrench it. The iron itself is rarely the first thing to fail. It’s the post underneath, pushed out of plumb by fault creep, and the hinge pin, corroded by marine fog. In a 1960s tract home near downtown Hayward, our tech found an original swing gate dragging so hard on the concrete it had worn a groove. The hinge post had tilted about 3 degrees from fault creep, and the salt fog off the Bay had seized the hinge pins solid. We dug out the old post footing, reset a galvanised steel hinge post with stainless hinges, corrected the sag, and the gate has swung clean through two fog seasons since.
Most wrought iron gate repairs in Hayward run between $220 and $650 depending on whether we’re resetting a post, replacing hinges, or cutting out and re-welding a corroded section. You’ll see the exact number in writing before we start. When faced with a corroded hinge pin on a 1960s gate, we don’t just swap the pin. We check the post for tilt first. There’s no point replacing hardware on a post that’s still moving.
Post Reset and Frame Straightening
When a post has tilted 2 to 4 degrees, we dig around the footing, reset it plumb, and pour fresh concrete. On Hayward’s flatlands the soil shifts slowly, so we use galvanised steel posts and stainless fixings where the old ones were painted steel. Then we re-hang the gate and square the frame. This is the fix that actually lasts, not the one that just buys a year.
Corroded Hinge and Latch Work
Salt air attacks painted steel hinges and latches years before inland gates show any wear at all. Hayward’s persistent morning moisture carries bay-salt particulates onto every exposed metal surface, and the fog doesn’t rinse it off. It just leaves another layer. We replace corroded hardware with stainless steel or marine-grade galvanised parts and use pet-safe lubricants when there’s a choice.
Metal Gate Repair in Hayward
Metal Gate Repair in Hayward covers everything from a chain-link gate in a 1970s tract home to a powder-coated steel driveway gate in the hills. The metal itself – whether steel, iron, or aluminium – gets one of two Hayward-specific failures. Salt fog rusts it. Fault creep racks it. Sometimes both hit the same gate, and sorting which one is the real problem changes the whole repair.
Typical metal gate repair in Hayward runs $180 to $580, with full post resets landing at the higher end and hardware swaps at the lower. You get the written price before we start. For steel gates near the Bay, we recommend galvanised frames or a marine-grade paint system over raw or lightly primed steel. Painted steel near the water is a losing game. You’ll repaint it forever.
Rust Repair and Steel Reinforcement
When rust has thinned a gate frame member, we cut out the bad section and weld in new steel, then treat the seam. Hayward’s marine fog means we’re aggressive about surface prep. A patch that looks fine in Livermore will blister within eighteen months here if the old rust isn’t ground out completely first.
Racked Frame Correction
When a gate still drags after hinge tightening, the frame is usually racked. On a metal gate, that means welded joints have shifted as the post moved. We straighten, re-weld, and reinforce the corners, then re-hang. Throwing a new hinge on a racked frame just moves the wear to the next weak point.
Trusted Brands We Service in Hayward
Our technicians are factory-trained on the operators Hayward homeowners actually have. That means FAAC and BFT slide and swing operators, Linear and Viking control boards, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common boards, arms, and safety edge parts for these brands locally, so a Hayward repair doesn’t wait on a parts shipment from out of state. If your operator starts and stops, or won’t respond to the remote, we diagnose the board and the motor first, then the limits, then the wiring. You’ll know what failed before we order anything.
Common Gate Repair Problems We See in Hayward Homes
- Posts tilted 2 to 4 degrees from fault creep. The Hayward Fault runs through central Hayward and creeps aseismically at roughly 5mm per year. Concrete-set posts that were plumb at installation slowly lean, and a simple hinge adjustment won’t stop the gate from sagging again in 18 months.
- Seized hinge pins from marine fog. The Bay’s salt-laden morning fog settles into Hayward neighborhoods and oxidises steel hardware faster than inland cities like Dublin or Livermore ever see. Hinge pins seize, latches stick, and gate movement gets stiff long before visible rust appears.
- Cracked concrete footings on 1950s to 1970s gates. Original wrought iron and chain-link gates from Hayward’s post-war tract homes are 50 to 70 years old now. The footings crack, the hinge pins corrode, and the frame racks, often all together.
- Faulty boards and motors on 1980s to 1990s automated gates. Hillside properties above Hayward added automatic swing and slide gates decades ago, and many still run original boards and motors. Salt air gets into outdoor enclosures and corrodes terminals. We replace or rebuild motors before suggesting a whole new gate.
Pricing for Gate Repair in Hayward, CA
A standard metal gate repair in Hayward – hinge replacement, latch adjustment, or minor sag correction – runs $180 to $350. A wrought iron post reset with concrete work lands between $350 and $650. Full automatic operator board or motor replacement runs $450 to $1,100 depending on the brand and whether we’re rebuilding or replacing. What changes the number in Hayward specifically is the post footing. If fault creep has shifted it, no hardware swap fixes the gate. You’ll get the exact price in writing before any work starts, every single visit, no pressure to accept. Call (626) 649-4572 for a free estimate, and a live person answers.
We Also Serve Cities Near Hayward
Latch & Post Gate Repair serves Hayward and the surrounding East Bay communities. We’re out in Dublin, Pleasanton, San Ramon, and Livermore regularly, handling the same gate repairs – wrought iron, metal, automatic operators, post resets, and rust work. Dispatch and scheduling run from our San Francisco Bay Area office, and crews serve Hayward locally. Call us and we’ll schedule a visit that fits your week.
Serving Hayward, CA - Our Local Coverage Area
We’re based in the Hayward area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hayward
Your post has likely tilted from Hayward Fault creep. The fault runs through central Hayward and shifts the ground about 5mm per year, enough to push a concrete-set post 2 to 4 degrees out of plumb over time. Tightening hinges on a moving post just re-angles the hinge load, so the sag returns within months. The fix is a post reset with fresh concrete, not another hardware adjustment. Call (626) 649-4572 and we’ll check the post before we sell you anything.
Salt-laden marine fog settles into Hayward neighborhoods regularly and accelerates oxidation on steel hinges, latches, and frames significantly faster than inland East Bay cities like Livermore or Dublin. Painted steel hardware corrodes and seizes, and surface rust becomes a chronic maintenance issue rather than an occasional one. We replace corroded parts with stainless steel or galvanised hardware, which lasts far longer on the coast.
Check the breaker and the operator’s power switch first, then look at the board for corrosion on the terminals. Salt air works its way into outdoor enclosures and eats connections over time. If the breaker is on and the board shows green but nothing moves, it’s likely a board or motor failure. We diagnose it on site and quote the repair in writing before ordering parts. Call us for a free estimate.
Yes. Every automatic gate operator in Hayward must have working entrapment protection – photo eyes, safety edges, or both – that stops and reverses the gate if something blocks it. This is a code requirement, and it matters around kids and pets. We check and replace safety edges and photo cells as part of any automatic gate repair, and we’ll never leave an operator running without them.
Yes. We reset the tilted post, square the frame, re-weld any cracked joints, and install stainless or galvanised hinges. Racked wrought iron gates in Hayward are exactly what we specialise in, because the fault creep underneath them is a fixed local condition. After the post is plumb again, the gate swings clean without dragging. Call (626) 649-4572 and we’ll get the post checked, price in writing, no pressure.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Hayward since 2009.