Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Frisco
Gate repair in Frisco typically costs $185 to $640 depending on whether it’s a sagging hinge post, a failed circuit board, or a full weld repair on an ornamental iron panel. Most visits in Frisco are completed the same day we arrive, and we answer the phone around the clock at (626) 649-4572. Since 2009, Latch & Post Gate Repair has focused exclusively on gates: iron gates, sliding gates, swing gates, and the electric operators that run them. We know Frisco’s neighborhoods, its HOAs, and the clay soil under them well enough to know the real reason a gate stops working is rarely the first thing you’d guess.
Why Latch & Post Gate Repair Is Frisco’s Preferred Gate Repair Company
Frisco homeowners call us because we name the actual problem before we touch anything. A gate in Starwood sagging at the latch may look like a hinge issue, but in Collin County it’s often a post footing that heaved in expansive clay. We check the underground cause before adjusting anything visible. That specificity is what separates a gate specialist from a general handyman.
Cody Beckman leads our team, and the Cedarwell C.A.R.E. values are non-negotiable on every Frisco visit. Shoe covers and drop cloths go down before a tech steps inside. We ask before moving anything in the garage or the hallway sensor zone. We explain the written price before work begins so there’s no ambiguity about the dollar figure. And we photograph the cleanup before we leave. Every repair carries the 365-Day Done Right Promise: if it isn’t right, Latch & Post makes it right, no argument, no fine print.
Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and our crews serve Frisco locally. That means a real person answers the phone at any hour. No voicemail queue, no callback roulette.
Iron Gate Repair in Frisco
Iron gate repair in Frisco almost always means ornamental steel or wrought iron in a master-planned community like Starwood, Phillips Creek Ranch, or Newman Village, where the HOA governs the design and a repair has to look like it never happened. The job typically involves realigning the gate to its frame, repairing cracked welds at the hinge points, addressing rust bloom at the base of pickets, and sometimes replacing a bottom rail that’s rotted through from sprinkler contact. In Frisco’s market, a standard weld repair on an ornamental iron gate runs $185 to $380, while a full panel rebuild with powder-coat touch-up lands between $520 and $900.
Weld and Rust Repair
North Texas summer heat above 100°F accelerates thermal cycling on ornamental iron panels. We see pickets pulling away from the frame, stress cracks at the top hinge, and rust that starts where powder coating got scratched by a weed trimmer years ago. We grind, weld, treat, and touch up with a matched finish. The goal is a repair that passes HOA aesthetic review without a second look.
Hinge and Post Repair on Ornamental Gates
Frisco’s black clay soil swells after rain and shrinks in drought. That heaves the post footing under a heavy ornamental gate, which throws the hinges out of line and makes the gate sag. We realign the post and gate together, using the right reinforcement so the same failure doesn’t repeat after the next rain cycle. A hinge and post realignment in Frisco runs $240 to $510.
Sliding Gate Repair in Frisco
Sliding gate repair in Frisco covers the cantilever and rack-and-pinion slide gates common in the city’s 2000s-era subdivisions and the occasional custom driveway gate in larger lots east of the Dallas North Tollway. The work usually involves freeing a bound rack, resetting the operator’s limit and safety photocell, replacing worn roller assemblies, or straightening a track that’s been knocked out of line by a car tire or a heaving concrete pad. A standard slide gate service call in Frisco runs $220 to $480, and if the operator needs replacement, a new LiftMaster or Elite unit installed typically lands between $780 and $1,400.
Gate Realignment
When a sliding gate jerks, shudders, or stops mid-travel, hairline misalignment is usually the cause. In Frisco we check the rail first, because the slab and the post pads underneath it move with the seasons. We reset the gate’s geometry before touching the operator so we aren’t putting a fresh motor onto a frame that’s still fighting itself.
Lock and Operator Adjustments
If a slide gate won’t close all the way, the magnetic lock won’t engage, which sets off the operator’s reverse and leaves the gate hanging open. We adjust the close limit, verify the lock alignment, and test the safety edge and photocell. It’s methodical, not guesswork.
Trusted Brands We Service in Frisco
Our techs are factory-trained on the brands Frisco families actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Frisco specifically, we see a lot of LiftMaster and Elite slide-gate operators because those were installed in large developer-built neighborhoods between 2003 and 2015. That means we’re familiar with the exact failure patterns those units develop around year 10 or 12, and we keep the common boards, limit switches, and safety photocells on the truck for faster turnaround. For Frisco customers with Viking or Ghost Controls on custom driveways, we order parts against the exact model and serial so there’s no guesswork on compatibility.
Common Gate Repair Problems We See in Frisco Homes
- Heaved hinge posts. Collin County’s expansive black clay swells and shrinks with every rain-drought cycle, slowly pushing gate posts out of plumb. The gate sags, the latch misses, and the owner assumes it’s a hinge failure. Most of the time the problem starts underground.
- Operator electronics failing in street-wide waves. In Frisco neighborhoods built by the same developer in a compressed window, entire blocks share the same operator model and installation vintage. We’ll find three or four homes on one street with the same failed LiftMaster or Elite slide-gate motor, all installed the same year and failing within months of each other.
- Weld fatigue on ornamental panels. Summer temperatures regularly topping 100°F cause thermal cycling that cracks welds at hinge points and picket attachments on iron gates. A crack that starts small can shear completely in a single hot season.
- Sensor and photocell faults from shifting geometry. When a gate drifts out of alignment, the safety photocell beam misses its receiver, and the operator refuses to close. It looks like an operator problem. It’s usually a geometry problem that a realignment fixes without replacing a motor.
Pricing for Gate Repair in Frisco, TX
Here’s the honest picture of what gate repair costs in Frisco. Weld and rust repair on ornamental iron runs $185 to $380. Hinge and post realignment runs $240 to $510. Full operator replacement, installed, runs $780 to $1,400 depending on the brand and horsepower. A custom gate rebuild with powder-coat match can reach $900. The written price arrives before any work begins, and it doesn’t change mid-job. That’s the Cedarwell Care Promise, and it’s the same on a small latch fix as it is on a full slide gate rebuild. Call (626) 649-4572 for a free estimate, and you’ll see the exact number in writing before we touch the gate.
We Also Serve Cities Near Frisco
Our crews work throughout the northern Dallas-Fort Worth metro, including Prosper, Aubrey, Little Elm, and Celina. If you’re in one of those communities and need Gate Repair services, we bring the same written-price guarantee and cleanup routine to every visit. You can also view our Gate Repair in Frisco page for more detail on our local service area.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Frisco
Yes, and we plan for it. Many Frisco HOAs require aesthetic approval before a visible repair or replacement on a gate, especially in communities like Starwood, Phillips Creek Ranch, and Newman Village where ornamental iron is the mandated standard. We match the finish, the picket profile, and the hardware style so the repair passes review, and we can document the work with photos if your HOA asks for before-and-after evidence. Call (626) 649-4572 and we’ll walk you through what your specific HOA needs.
The hinge adjustment was almost certainly addressing a symptom, not the cause. In Frisco, the expansive clay soil under the post heaves with every rain-drought swing, and that’s what throws the gate out of line. We realign the post and the gate together, and we reinforce the footing where needed so the sag stops instead of returning next season. It’s the difference between a repair and a repeat visit.
No. Frisco subdivisions built between roughly 2003 and 2015 often share the same operator model and installation vintage across entire streets, because a single developer built them all in a compressed window. When one LiftMaster or Elite slide-gate motor fails, the neighbors’ units are usually within months of the same failure. We can inspect your unit before it dies, and we’ll tell you honestly whether it needs service now or has another season in it.
It’s most often the safety photocell, especially in Frisco where gate geometry shifts seasonally. When the beam drifts out of alignment, the operator reads a blocked signal and refuses to move. We test the photocell first, then the keypad transmitter, then the control board, in that order. It saves you money because we replace only what’s actually failed.
Frequently, yes. A surprising share of “dead operator” calls in Frisco are actually geometry problems: the gate is binding against a heaved post or a knocked-out rail, and the motor is laboring or tripping its safety. We free the gate, reset the limits, and verify the photocells. If the operator board is truly failed, we’ll quote a replacement and show you why nothing less would fix it. Either way, the price is in writing before we start. Call (626) 649-4572 for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Frisco since 2009.