Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Freeport
Gate repair in Freeport usually starts with finding what actually failed, not what the symptom suggests. On the canal-grid streets around Woodcleft Canal and the Nautical Mile, that distinction matters more than anywhere else on Long Island. Salt air and Sandy-era storm surge have left thousands of post footings waterlogged and hundreds of hinge barrels corroded through, and the two failures look almost identical from the driveway. Our Gate Repair team tests the post before we quote the hinge. If your gate drags, sags, or trips its operator, call Latch & Post Gate Repair at (626) 649-4572 and we’ll give you a written price before any work begins.
Why Latch & Post Gate Repair Is Freeport’s Preferred Gate Repair Company
Freeport homeowners call us because we talk about the post before the hinge, and because we protect the house while we work. We lay drop cloths on the floor and put on shoe covers before we step inside. We choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters. Every technician is background-checked, uniformed, and trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Cody Beckman, who leads Latch & Post Gate Repair, insists on one thing above all: the price gets written down before we touch anything. No exceptions, no “we’ll see how it goes.” You’ll know the number, and if the repair isn’t right within 365 days, we make it right under the Done Right Promise. A live person answers our phone 24 hours a day, seven days a week. When a canal-front gate won’t close on a Friday evening, you won’t get a voicemail.
We’ve worked the streets off Guy Lombardo Avenue, the blocks around Baldwin High School, and the waterfront lanes east of the Woodcleft Canal. Freeport is a village of 1940s and 50s Cape Cods and ranch homes, many still running their original wrought-iron or chain-link driveway gates. Those gates are now 60 to 80 years old. We know what that stock was built with, and we know what salt air has done to it since.
Wood Gate Repair in Freeport
Wood gate repair in Freeport almost always involves framing first, hardware second. The gate’s cedar or pressure-treated stiles may be sound, but the hinge screws have been working loose in salt-softened wood for years. We replace rot-compromised sections, re-align the stiles, and re-hang with stainless fasteners sized for the actual stile thickness. Most wood gate repairs in Freeport run between $180 and $420, depending on how much of the frame needs replacing, and you’ll see the exact number in writing before we start.
Rot, Rack, and Salt-Damaged Hardware
Canal-front wood gates absorb moisture from storm surge and salt mist. The bottom rail rots first, the gate racks, and the latch no longer meets the strike plate. We replace the failed rail, square the frame, and install stainless hinges so the corner doesn’t sag again in two winters.
Realigning Gates That No Longer Close
Sometimes the wood is fine. The gate has settled because the post shifted. We test the post footing before adjusting the gate, because tightening a latch on a rocking post is wasted work. Then we re-align the gate to the post and set the latch so it engages with a finger, not a shoulder.
Driveway Gate Repair in Freeport
Driveway gate repair in Freeport is often an operator problem hiding a structural problem. The LiftMaster or Ghost Controls motor trips its safety sensor, or grinds, or stops halfway. Nine times out of ten the operator is fine. The gate is dragging because a hinge barrel has corroded or a post has settled into a waterlogged footing. We fix the structure first, then re-set the operator’s limits and force settings. Typical driveway gate repairs in Freeport run $220 to $650 for structural work, and $180 to $450 for operator service, adjustment, or replacement. The written estimate covers both.
Single Swing Gates on Cape Gods and Ranches
Most Freeport driveways have a single swing gate with a chain-link or wrought-iron frame. The strain of 60 years of salt air shows at the hinge side first. We replace hinge pins, re-tap or sleeve the post, and adjust the operator so the gate doesn’t fight the closer.
Double Gates and Canal-Front Setups
Woodcleft Canal properties often have two gates: one at the street, one at the water. The waterside gate sits in the worst air. It’s usually the one that fails first, and it’s usually an unpainted galvanized latch that has rusted through. We work both gates in one visit, and we specify stainless hardware on the waterside gate every time.
Trusted Brands We Service in Freeport
We’re factory-trained on the operators Freeport homeowners actually have: Linear and Viking on older automatic gates, DoorKing on the heavier slide and swing models, Ghost Controls on newer DIY-converted gates, and LiftMaster across most automatic driveway gates. We stock common Linear and LiftMaster parts for Freeport work, so a board swap or limit switch replacement doesn’t have to wait on a parts order. Most operator parts are in the van on the first visit.
Common Gate Repair Problems We See in Freeport Homes
- Salt-corroded hinge barrels on canal-front gates. The hinge pin seizes, the gate grinds, and the opener burns out trying to move it. We replace the hinge set with marine-grade stainless before the motor gets damaged.
- Rocking posts with waterlogged footings. After Hurricane Sandy, many Freeport footings were never re-set. The post looks plumb but rocks when you push it. We test every post before quoting a hinge repair.
- Rusted latches and missing strike plates. Salt air eats the latch spring first. Then the strike plate loosens. Then the gate won’t stay shut. A latch replacement in Freeport typically runs $90 to $180.
- Operator safety systems out of adjustment. Entrapment protection sensors on Freeport automatic gates constantly drift as the gate frames move and settle. We re-set the photocells and force settings so the gate reverses when it should, not when it shouldn’t.
Pricing for Gate Repair in Freeport, NY
Here are the ranges we quote in Freeport today. A standard latch replacement runs $90 to $180. Hinge replacement, including labor and stainless hardware, runs $150 to $320 per hinge. Post re-setting or new post footing work runs $350 to $750. Operator board replacement runs $220 to $450. Full operator replacement runs $500 to $1,200 installed. A sagging wood gate realignment runs $180 to $350. Every quote is written before work starts, and the price you see is the price you pay. No exceptions.
We Also Serve Cities Near Freeport
Our Gate Repair in Freeport crews also take calls from Hempstead, Long Beach, Levittown, and Hicksville. If you’re on the edge of Freeport near the Hempstead line or down toward the Long Beach barrier island, call us and we’ll tell you straight if we can get there today.
Serving Freeport, NY - Our Local Coverage Area
We’re based in the Freeport area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Freeport
Salt air and tidal surge. Freeport’s canal network means constant salt moisture on unpainted gate hardware, and galvanized or painted steel that inland Nassau villages never stress fails here in a fraction of the time. That’s why we spec stainless hinges and fasteners on canal-front work.
Almost never. A gate that rocks at the base has a footing problem, not a hinge problem. We see it constantly on the streets around Woodcleft Canal, where Sandy’s surge saturated the soil and loosened footings that were never re-set. Call (626) 649-4572 and we’ll test the post before we quote anything. Estimates are free.
Marine-grade stainless steel for hinges, latches, and fasteners. Galvanized hardware holds up better than painted steel but still pits after several years of salt mist. Painted steel is fine inland. It has no business on a Freeport canal-front gate.
Yes. Every automatic gate must have a working reverse mechanism and safety sensors that stop the gate if someone or something is in the path. If your gate doesn’t reverse when it meets resistance, that’s a safety issue, not a convenience issue. We check and re-set entrapment protection on every automatic gate repair.
They do. The waterside gate sits in the worst salt air and usually fails first, often at the latch or the lowest hinge. We spec different hardware for the waterside gate than the street-side gate, and we test both posts for waterlogged footings. One visit covers both gates. Call (626) 649-4572 for a written price.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Freeport since 2009.





Before
After
Before
After
Before
After