Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Cedar Hill, TX
Cedar Hill sits on top of the Balcones Escarpment, and that single fact shapes almost every gate job we do here. Sloped driveways, expansive clay soil, and wind exposure mean latches misalign, posts lean, and openers fail differently than they do in flat neighbors like DeSoto or Duncanville. We’re Latch & Post Gate Repair, and we focus on gates: the latch that holds them and the post that carries them. From our home page you can see the full scope of what we do, and below you’ll find the three Cedar Hill services this city calls on most. Call (626) 649-4572 for a written price before any work begins.
Why Cedar Hill Homes Are Different
Most Cedar Hill residential subdivisions were built between the late 1980s and 2000s, with newer estate homes near Joe Pool Lake and along the escarpment. Those two areas keep us busy for different reasons. The lakeside homes often have ornamental wrought-iron driveway gates on sloped entries, and the older neighborhoods closer to downtown still run their original tubular-steel and chain-link gates, with hinges and latches that have gone 20 to 30 years without replacement.
The terrain here is unlike anything else in the southern Metroplex. Driveways with real grade are common, and that slope is where gates fail first. A gate sized for level ground will drag its bottom rail at the low end as the black-clay soil beneath settles and shifts. We see it repeatedly on the same streets near Joe Pool Lake, where the downhill latch-post side settles faster than the uphill hinge side. Posts heave, re-plumb, and need concrete-collar work at a rate that simply doesn’t show up in flatland cities.
Wind is the other quiet factor. Cedar Hill’s elevated position catches more of it than the surrounding suburbs, and it accelerates rust and stress-cracking on hardware. When a North Texas ice storm arrives, sloped driveways make a manual gate genuinely hazardous to operate, and the freeze-thaw cycle works against any post already rocking in shrink-swell clay.
Our Main Cedar Hill Services
The two jobs Cedar Hill homeowners call about most are gate repair and electric gate repair. Installation work is the third, and it usually starts with a free measure of the driveway slope. Here’s what each involves here.
Gate Repair in Cedar Hill
Most of our gate repair calls in Cedar Hill start with a dragging gate, a latch that won’t catch, or a hinge that has pulled loose from a leaning post. On sloped driveways, a gate that worked fine at install can start scraping the concrete within a few seasons as the downhill side settles. We re-plumb the post, reset the hinges, and trim or shim the gate so the swing arc works for the actual grade, not the level ground the original installer assumed. You’ll get the written price before we touch anything. Gate Repair in Cedar Hill covers the full range of latch, hinge, and post work.

Gate Installation in Cedar Hill
New gate installations in Cedar Hill demand attention to the slope first and the style second. We take a measure, check the grade, and talk through what will happen to the posts over the next few years in that black clay. That conversation changes which hinge layout we recommend and whether a concrete collar makes sense from the start. We build for what Cedar Hill soil and wind actually do, so the gate lives longer than the first fix. Get details on the process and what a full install includes at Gate Installation in Cedar Hill.

Electric Gate Repair in Cedar Hill
Openers mounted on sloped entries work harder than they were usually sized for, so we see more stripped gears, burned control boards, and overheated motors here than in surrounding flat cities. The fix isn’t always the obvious one; sometimes the opener is fine and it’s the dragging bottom rail or a binding hinge that is overloading it. We diagnose the whole assembly, not just the motor. See what that work involves at Electric Gate Repair in Cedar Hill.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Cedar Hill
We work on Viking, Ghost Controls, DoorKing, and Elite equipment most often in Cedar Hill, and our technicians are factory-trained on those brands plus the rest of the families we service. Common parts are carried in the truck, which means most repairs finish on the first visit. See the full list on our brands page.
Pricing for Gate Company in Cedar Hill, TX
| Service | Typical range in Cedar Hill |
|---|---|
| Service call and on-site diagnosis | $49-$89 |
| Standard latch replacement (ornamental iron or steel gate) | $95-$210 |
| Hinge replacement (pair, standard residential) | $140-$320 |
| Gate post re-plumb and reset (single post) | $260-$520 |
| Concrete collar around shifted gate post | $150-$350 |
| Bottom rail adjustment or trim to clear grade | $120-$275 |
| Re-weld broken gate seam or bracket (ornamental steel) | $85-$220 |
| Driveway swing gate, pre-hung installation | $1,100-$4,800 |
| Full gate system install including posts and hardware | $1,800-$7,500 |
| Electric opener replacement or new install (hardware only) | $1,250-$6,000 |
| Electric operator troubleshooting and repair | $150-$450 |
| Control board or receiver replacement | $220-$650 |
Sloped entries push costs up in Cedar Hill because post resetting here often requires more concrete than the same fix on flat ground, and a gate that has dragged for a season usually needs bracket or rail work too. Whatever the number is, it’s the one you approve in writing before we start. Nothing gets added after the work.
Neighborhoods We Serve in Cedar Hill
Our crews work throughout Cedar Hill, including the homes along the escarpment, the subdivisions near Joe Pool Lake, and the older streets closer to downtown. Depending on the part of Cedar Hill you’re in, we can usually reach you within a day, and often faster for a gate that won’t close and has kids or pets behind it.
- Lake Ridge
- High Pointe
- Kingswood
- Waterford Oaks
- Northwood
Service Area – Cities Near Cedar Hill
Our technicians also run calls in the surrounding communities, so if you’re just outside Cedar Hill, you’re still inside our normal route. We serve DeSoto, TX, Duncanville, TX, Midlothian, TX, and Red Oak, TX, with the same written price and care routine on every visit.
Serving Cedar Hill, TX - Our Local Coverage Area
We’re based in the Cedar Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cedar Hill
Most Cedar Hill addresses are reachable within one business day, and a gate that won’t close at all moves to the front of the schedule because it’s a safety issue for kids and pets. A live person answers when you call, day or night, so you’ll know the timeline before you hang up.
Some Cedar Hill neighborhoods have HOA standards that apply to gate style, height, and finish, so it’s wise to check your covenants before a full replacement. Repairs and like-for-like hardware changes typically don’t trigger approval. We’ll note the existing style in your written quote so you have what you need to show an HOA if they ask.
A gate that drags on a Cedar Hill slope usually means the downhill post has settled faster than the uphill one. The durable fix is to re-plumb the post, add a concrete collar, and adjust the swing arc for the actual grade. A quick adjustment alone will fail again once the soil moves. Call (626) 649-4572 and we’ll give you a straight answer on what your specific gate needs.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cedar Hill Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide





Before
After
Before
After
Before
After