Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Davis
Gate repair in Davis usually means a wood side-yard gate that has sagged out of plumb, a latch that no longer catches, or an older operator that has quit responding. We handle all three. Most repairs in Davis run $140 to $420 for hinge, post, and latch work, and $200 to $600 for control board and safety sensor replacements on electric gates. If your gate won’t close or the post is pulling away from the fence, call (626) 649-4572. We answer every call with a live person, and we’ll give you a written price before any work starts.
We know Davis not as a map pin but as a town of rear greenway paths, bicycle commuters, and 1960s ranch homes with wood gates that have been swinging in the Sacramento Valley heat for fifty years. Our Gate Repair team works on those gates every week. They hang differently here than in Dixon or Woodland, because Davis gates open onto pedestrian paths, not just driveways. That changes which parts wear out and how we fix them. More on that below.
Key takeaways:
- Most Davis gate repairs cost $140 to $600, with a written price before any work begins.
- High-cycle pedestrian gates fail faster here than in nearby cities because Davis is built for bikes and foot traffic.
- We service Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule operators.
- Every job includes shoe covers, drop cloths, and a cleanup photo. Your floors and yard stay clean.
- The 365-Day Done Right Promise covers every repair, with no fine print.
Why Latch & Post Gate Repair Is Davis’s Preferred Gate Repair Company
Davis homeowners call us because we understand the specific way gates fail in this city before we ever arrive. We know that a gate near the UC Davis campus sees more latch cycles in a week than a driveway gate in West Sacramento sees in a month. We know that Village Homes gates swing inward toward the house instead of outward toward the street, because they open onto shared greenways. And we know that a wood gate on a 1970s ranch home on Anderson Road has probably never had its hinge post footing checked.
The Davis service area includes East Davis, West Davis, Central Davis, Village Homes, and the neighborhoods around Russell Boulevard and Covell Boulevard. Our technicians are background-checked, uniformed, and trained on the brands Davis families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Cody Beckman has built the team around one promise: every job gets a written price first, shoe covers and drop cloths inside the home, and a cleanup photo before we leave. Pets, kids, and clean floors are part of the job description.
Sliding Gate Repair in Davis
Sliding gate repair in Davis typically means a driveway gate on a heavier track that has started grinding, binding, or stopping halfway. Davis has fewer sliding gates than swing gates, but the ones we see here are usually on larger properties near the edge of town, around South Davis and the rural transition toward Dixon. Most sliding gate repairs in Davis run $180 to $520, depending on whether the problem is a bent track, a worn roller, or a failing motor gear.
Track and roller work
When a sliding gate won’t move smoothly, the cause is usually a track that has settled out of level or a roller bearing that has ground itself flat. We check the entire length of the track, reset the level, and replace rollers as a set, not one at a time. This prevents the uneven wear that causes gates to bind again within a few months.
Operator and limit switch failures
If the gate moves but won’t stop in the right place, or won’t open at all, the operator’s limit switch or control board is the likely culprit. We carry replacement boards for LiftMaster, DoorKing, and Elite sliding operators, which means most Davis sliding gate repairs are finished on the first visit. We test the safety reversing function before we leave, every single time.
Wrought Iron Gate Repair in Davis
Wrought iron gate repair in Davis usually involves a driveway or pedestrian gate that has rusted at the hinge barrels, sagged at the post, or broken a picket weld. Iron gates hold up better than wood in Davis summers, but they are not immune to the Valley’s damp winter fog. Most wrought iron repairs in Davis run $160 to $460 for hinge replacement, weld repair, and realignment.
Rust repair and hinge rebuilding
We grind out rusted weld points, rebuild the hinge barrels, and re-hang the gate so it swings true. If the post itself has shifted, we reset it in fresh concrete and let it cure before re-hanging. A wobbly iron gate usually means the post footing has failed, not the gate itself. We fix the source, not just the symptom.
Realignment and latch replacement
An iron gate that drags on the ground or won’t latch has likely twisted at the frame. We straighten the frame, adjust the hinges, and replace the latch or lock hardware so the gate closes and stays closed. If the gate has a magnetic lock or keypad, we test and adjust that too.
Trusted Brands We Service in Davis
We service the gate operators Davis homeowners actually own, including Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That matters because a Ghost Controls swing arm fails differently than an Elite slide operator, and the fix is not interchangeable. We keep common parts for these brands on hand for Davis jobs, which means fewer return trips and faster turnaround. If your operator predates modern UL 325 entrapment protection, we’ll explain what can be retrofitted and what a replacement would cost, in plain numbers, before you decide anything.
Common Gate Repair Problems We See in Davis Homes
- Seasonal sagging and binding: Sacramento Valley summers push past 105°F, drying and cupping wood gate boards. Winter tule fog and rain swell the same boards, pulling gates out of plumb. Davis gates live inside this cycle every year.
- Rotted bottom rails on side-yard gates: Sprinkler overspray keeps the lower wood wet for months. We see rotted bottom rails most often on older homes near UC Davis where irrigation systems run close to fence lines.
- Legacy operators with obsolete control boards: Many Davis homes still run operators installed before modern entrapment protection standards existed. These boards fail without warning and often cannot be repaired with current parts.
- Reversed swing gates in Village Homes: The greenway layout means gates open inward, away from shared paths. Standard hinge and latch kits don’t always fit without adjustment. We modify and re-hang these correctly.
Pricing for Gate Repair in Davis, CA
Here are the numbers we quote most often in Davis: hinge and post repairs run $140 to $320. Latch and lock replacements run $90 to $220. Control board replacements run $200 to $450. Photo eye and safety sensor replacement runs $150 to $300. Weld repairs on iron gates run $160 to $460. Sliding gate track and roller work runs $180 to $520. The written price we give you before starting is the price you pay. No one adds a line item after the fact.
What affects the final number is the condition of the post footing, the age of the operator, and whether we’re repairing one hinge or re-hanging an entire gate on a new post. We’ll show you the exact figure in writing before we touch anything. Estimates are free. Call (626) 649-4572 to schedule one.
We Also Serve Cities Near Davis
Our team covers Davis and the surrounding communities: Dixon, Woodland, West Sacramento, and Winters. If you live just outside Davis, the same written-price policy, shoe covers, and 365-Day Done Right Promise apply on every visit. We coordinate from our Sacramento-area dispatch, and our crews know the back roads and neighborhoods around Davis well enough to show up on time.
Serving Davis, CA - Our Local Coverage Area
We’re based in the Davis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Davis
Davis gates sag more because of two local conditions: proximity to the Putah Creek riparian moisture and the city’s bike-path density. The real cause is that your gate is being cycled far more than a typical suburban gate in Dixon or Woodland. Davis is one of the most bicycle-dense cities in the US, and side-yard gates here take daily foot and bike traffic through rear access paths and greenway connections. That high cycle count wears hinges and settle post footings faster. Add the summer heat and winter fog cycle, and you get seasonal sagging that other Central Valley towns simply don’t experience at the same rate. Call (626) 649-4572 and we’ll diagnose it in one visit.
Sometimes you can retrofit, often you cannot. Operators installed before the UL 325 entrapment protection standard took effect may still work mechanically, but retrofitting a modern photo eye and reversing sensor requires a control board connection that many older boards don’t have. If your board has an open input for a safety beam, we can add the sensor. If it doesn’t, replacement is the honest answer. We’ll show you both options with printed numbers before you choose.
Yes. Village Homes gates were built to swing inward, away from the shared greenway paths, and if a previous owner hung one to swing outward, it blocks pedestrian traffic and violates the original design intent. We can re-hang the gate with the correct inward swing, replace the hinges and post if needed, and adjust the latch so it holds properly. We’ve done this on multiple Village Homes gates that open onto common areas or sidewalk-adjacent paths.
The wood is moving. Davis summers regularly exceed 105°F, which dries and cups wood boards so the latch edge rises and binds against the frame. Then winter tule fog and rain swell the same boards, making the gate drag on the ground or stick at the bottom. The fix is to adjust the hinge geometry for the gate’s full seasonal range, not just the current month. We also replace boards that are too far gone to hold their shape.
Yes. We service swing gates and sliding gates with operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Swing gate arms, slide gate motors, control boards, keypads, photo eyes, and loop detectors are all part of our daily work in Davis. If you know your brand and model, tell us when you call, and we’ll bring the right parts on the first trip.
Call Latch & Post Gate Repair in Davis
If your gate is sagging, binding, not latching, or not responding to its remote, call (626) 649-4572. You’ll reach a live person, no voicemail queue, no callback roulette. We’ll schedule a time that works for your household, arrive on time, hand you a written price before starting, and leave your floors and property exactly as clean as we found them. That’s the 365-Day Done Right Promise, and it’s not an upgrade. It’s just how we work.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Davis since 2009 as part of the Cedarwell family of independently owned and operated gate specialists.