Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Coral Gables
Gate repair in Coral Gables usually falls into two camps: a gate that won’t open or close properly, or one that’s sagging, seized, or no longer clearing the latch. Most repairs run between $180 and $850 depending on whether we’re replacing a hinge, rewiring an operator, or fabricating a bracket for a coral rock pillar. We schedule Coral Gables calls Monday through Saturday, and a live person answers the phone around the clock at (626) 649-4572. If you’re in Coral Gables with a gate that’s dragging on the driveway or a keypad that stopped talking to the board, call us and we’ll put a written price in front of you before anyone touches a tool.
We know this city’s gates specifically. Coral Gables has thousands of 1920s-to-1940s Mediterranean Revival homes with hand-forged iron gates that were built before safety photocells, before current operator torque limits, and before anyone worried about salt air from Biscayne Bay. That changes how a repair should be approached. A generic gate company might show up, swap a hinge pin, and leave. We look at the pillar, the operator, the board, and the ironwork, because in Coral Gables those are rarely separate problems.
Every visit includes shoe covers and drop cloths before we step inside your home, and we choose pet-safe lubricants where there’s a choice. If you need us to schedule around nap time or a dog that doesn’t love strangers, say so when you call. We’ll plan around it. The phone number again: (626) 649-4572.
Why Latch & Post Gate Repair Is Coral Gables’s Preferred Gate Repair Company
Coral Gables isn’t a generic Miami-Dade suburb, and gate work here isn’t generic either. The Board of Architects reviews exterior changes on a huge number of properties, which means a repair that changes the look of a gate can trigger a review. We understand that and we plan repairs to preserve original proportions and finishes wherever possible. Cody Beckman, who runs Latch & Post Gate Repair, has built the team around the idea that a Coral Gables gate fix has to survive two inspections: ours, and the city’s.
Our Gate Repair team arrives in uniform, background-checked, and factory-trained on the brands families here actually own: Viking, Ghost Controls, DoorKing, and Elite among them. We carry common control boards, hinge hardware, and safety edge components on the truck so most Coral Gables repairs finish the same day. You get a written price before the work starts, and the 365-Day Done Right Promise covers every repair. If it’s not right, we make it right. No argument, no fine print.
The crews that serve Coral Gables work from the brand’s Miami (South FL) office, which means parts and backup are close. And because we answer calls with a live person 24 hours a day, a gate stuck open at 6 a.m. on Old Cutler Road gets a human voice, not a voicemail.
Commercial Gate Repair in Coral Gables
Commercial Gate Repair in Coral Gables usually means automated slide or swing gates at small office parks, medical buildings, or the occasional boutique property along Ponce de Leon Boulevard. These systems cycle dozens of times a day, and the first component to fail is almost always the operator or a worn roller, not the gate itself. A commercial gate that won’t open can block deliveries, tenants, and emergency vehicles, so we prioritize these calls when you tell us what’s happening. Most commercial gate repairs in Coral Gables run $350 to $1,400 depending on whether it’s a limit switch adjustment, a motor replacement, or a bent track from a hurricane-season wind gust. You’ll see the exact number in writing before we start, and we carry commercial-grade parts for Viking, Ghost Controls, and DoorKing systems.
Operator and Control Board Replacement
Commercial operators in Coral Gables tend to be run harder than residential ones, and the control boards fail from heat cycling in Florida summers. We can often retrofit a current board into an older enclosure rather than replacing the whole operator, which saves a few hundred dollars and keeps the gate’s aesthetic unchanged. If replacement is cheaper because the motor is also tired, we’ll tell you that honestly.
Track, Roller, and Safety Loop Service
Commercial slide gates live or die by their track alignment. Salt air off Biscayne Bay accelerates roller corrosion, and we regularly replace seized roller assemblies before they chew up the track. We also test and repair loop detectors and safety photocells on every commercial visit, because a gate that reverses on a car is a liability, not just a nuisance.
Iron Gate Repair in Coral Gables
Iron Gate Repair in Coral Gables is our most requested service, and the reason is tied directly to the city’s architectural fabric. The original 1920s-1940s estates along Alhambra Circle, Country Club Prado, and Granada Boulevard hold thousands of hand-forged wrought iron gates that are now 80 to 100 years old. These gates were built beautifully and they were built before modern coatings. Salt air from the bay gets under the old paint film, rust starts, and the gate either seizes at the hinges or flakes paint onto the driveway. Most iron gate repairs in Coral Gables run $250 to $900, with full strip-and-refinish work landing between $900 and $1,800 depending on size and ornamentation.
Hinge Re-Anchoring in Coral Rock
Coral Gables’s oolitic limestone pillars are beautiful and notoriously soft. When a wrought iron gate has been swinging for decades, the hinge bolts wallow out the holes, and simply using a larger lag in the same spot rarely holds. We epoxy-set sleeve anchors or fabricate a hidden steel backing plate behind the pillar face, which preserves the original look while actually fixing the problem.
Weld and Rust Repair Without Replacing the Gate
Older iron gates develop stress cracks at connection points, especially where scrollwork meets the top rail. We weld those in place rather than swapping in a new panel, which matters in Coral Gables because the Board of Architects expects original ironwork to stay original. A clean weld, a proper primer, and a matched finish, and the gate looks like it’s supposed to.
Common Gate Repair Problems We See in Coral Gables Homes
- Hinge seizure from Biscayne Bay salt air. Properties east of Old Cutler Road, especially in Gables Estates and Cocoplum, get noticeably more oxidation than homes even a mile inland. Paint-film failure is the leading cause of stuck swing gates on bay-side estates, and the fix is almost always a hinge rebuild plus a proper marine-grade coating, not just oiling the pin.
- Wellowed hinge bolts in coral rock pillars. The city’s soft, fissured oolitic limestone doesn’t hold fasteners the way poured concrete does. We re-anchor with epoxy-set sleeve anchors or a hidden steel plate, because driving a bigger screw into the same hole is a repair that fails.
- Obsolete control boards on pre-safety-era gates. Many older automated gates in Coral Gables ran for years without proper entrapment protection, or their original photocells are dead. We flag missing safety edges and dead photocells on nearly every older swing or slide gate we service, because UL 325 compliance isn’t optional once you know the gap exists.
- Wind damage from hurricane season. Coral Gables took a direct hit from Irma in 2017, and every summer the wind loads bend gate frames off their posts and strip operator mounts. Post-storm calls for structural gate repair spike predictably, and we stock the brackets and weld gear to keep the backlog moving.
Trusted Brands We Service in Coral Gables
Most Coral Gables gates we see are running either a legacy operator from Viking, Ghost Controls, DoorKing, or Elite, or a newer LiftMaster or BFT unit. We’re factory-trained on all of them, and we keep common boards, remotes, safety edges, and hinge hardware on the trucks that serve Coral Gables. That means less waiting for parts and more same-day fixes. If your operator has a discontinued control board, we’ll tell you honestly whether a retrofit is the smart money or a full operator swap is cheaper in the long run.
Pricing for Gate Repair in Coral Gables, FL
Here’s what gate repair in Coral Gables actually costs on our current rate sheet. A hinge re-anchoring into coral rock runs $250 to $450 per pillar. A seized or rusted hinge rebuild runs $180 to $320 per hinge. Control board replacement runs $350 to $850 depending on brand and whether it’s a current or retrofit board. Safety photocell and loop detector repair runs $180 to $400. Full iron gate strip, prime, and refinish runs $900 to $1,800. Every job gets a written price before the work starts, and the 365-Day Done Right Promise covers it. Estimates are free, and there’s no pressure to accept on the spot.
We Also Serve Cities Near Coral Gables
Our Coral Gables customers sometimes need us a few miles out, and we’re glad to help. We serve Miami, Key Biscayne, Miami Beach, and Hialeah with the same written-upfront pricing, shoe covers, and Clean up like it is our own home routine. If you’re just outside Coral Gables, call (626) 649-4572 and we’ll schedule you directly. You can also learn more about our work across Florida on the Gate Repair in Coral Gables page.
Serving Coral Gables, FL - Our Local Coverage Area
We’re based in the Coral Gables area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Coral Gables
Yes, and in Coral Gables we usually prefer to. Most dragging gates trace back to hinge bolts that have wallowed out the soft coral rock pillar, and the fix is re-anchoring with epoxy-set sleeve anchors or a hidden steel backing plate, not a new gate. If the ironwork itself is cracked or the frame is bent from a wind event, we’ll show you exactly where the damage is and quote both repair and replacement so you can choose. The written price comes before any work starts, so you’ll never be surprised. Call (626) 649-4572 for an exact quote - estimates are free.
In most cases, no, because a repair that preserves the existing design, proportions, and finish is not a replacement. We’re familiar with the Board of Architects’ standards for exterior changes in Coral Gables’s historic neighborhoods, so we default to restoring original ironwork rather than swapping in modern panels that might require review. If your property is contributing to a designated historic district and the repair would change the gate’s appearance, we’ll tell you before you’re caught off guard. The goal is a gate that works and still looks like the one your house was built with.
It depends on the motor. If the motor is still strong and the board is the only failure, a retrofit board usually costs $400 to $700 installed and keeps your existing fence and gate untouched, which matters for Coral Gables aesthetic review. If the motor is 15-plus years old and the gearbox is tired, replacing the whole operator often runs $900 to $1,800, and then you get current safety compliance and a warranty. We’ll test the motor under load and give you both numbers in writing. Call us at (626) 649-4572 and we’ll walk you through what’s actually wrong before recommending one.
Because the problem isn’t the hinge pin itself, it’s salt-air corrosion working through the original paint film from underneath. Homes within a mile or two of Biscayne Bay oxidize bare iron measurably faster than properties farther inland, and a surface coat of paint doesn’t stop rust that’s already active. We strip the hinge area, remove the corrosion, rebuild or replace the pin and bushings, and then apply a marine-grade primer and finish that holds up in Coral Gables’s salt environment. The difference is preparation, not just product.
Yes, and we check them on every automated gate visit. Many older Coral Gables estates have gates installed before modern entrapment protections were required, and we regularly find dead photocells or missing safety edges that leave the gate out of UL 325 compliance. We repair and often add non-contact safety edges and current photocells for $180 to $400 per component, and we test the full reverse function before we leave. Call (626) 649-4572 and we’ll schedule someone who can test, repair, and photograph the finished work for you.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Coral Gables with written-upfront pricing and the 365-Day Done Right Promise.