Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Coconut Creek
Gate repair in Coconut Creek usually means one of two things: a single-family driveway gate off Wiles Road or Sample Road, or a high-cycle community entry gate at one of the city’s large 55+ active adult communities. Most repairs here cost between $150 and $650, depending on whether we’re replacing a latch, realigning a sagging swing gate, or rebuilding a control board. We answer every call with a live person at (626) 649-4572, 24 hours a day, and we can usually have a technician at your Coconut Creek property the same day you call. Cody Beckman and our team know the difference between a Wynmoor Village board authorization and a single-home driveway gate call, because we handle both every week.
What makes Coconut Creek different is the sheer volume of gate traffic. Wynmoor Village alone has over 4,000 units, and Century Village adds thousands more residents moving through entry and exit gates daily. When a gate arm fails at one of those communities during morning rush, hundreds of residents are backed up in minutes. That’s not a typical Broward suburb problem. It’s a Coconut Creek problem, and it shapes how we stock parts, schedule emergency calls, and coordinate with HOA boards.
Why Latch & Post Gate Repair Is Coconut Creek’s Preferred Gate Repair Company
Latch & Post Gate Repair has been handling gate work since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Our Gate Repair team focuses exclusively on gates, not fences, not general handyman work. That focus matters when you have a 40-year-old electromechanical operator at a community entry point that no one makes parts for anymore. We know which surplus sources still carry them, and we know which modern replacements actually fit the old mounting patterns.
Coconut Creek homeowners and HOAs call us because we show up with a written price before any work starts, every single visit. That’s the Cedarwell Care Promise, and it’s not an upsell. Shoe covers and drop cloths go down before we step inside your home. We photograph the cleanup before we leave. If a kid is napping or a dog is stressed, we use quiet tools and work around the schedule. A background-checked, uniformed technician arrives, not a subcontractor you’ve never heard of.
Every repair and installation is covered by our 365-Day Done Right Promise. If something isn’t right, we make it right. No argument, no fine print. That’s why HOAs in Coconut Creek keep our number on their approved vendor list.
Driveway Gate Repair in Coconut Creek
Driveway Gate Repair in Coconut Creek covers swing gates and slide gates on single-family homes, mostly in the newer subdivisions along Wiles Road and Sample Road. The most common calls we get are gates that sag and drag on the concrete, openers that grind but don’t move the gate, and remotes or keypads that stop working after a storm. A typical driveway gate repair in Coconut Creek runs between $180 and $400 for hinge replacement, realignment, or limit switch adjustment. If the operator itself has failed, you’re looking at $450 to $1,200 depending on the brand and horsepower.
We name the exact price in writing before we touch anything. That matters because nobody wants to approve a repair and then get surprised by an invoice. You’ll see the number first.
Hinge and Post Repairs
Coconut Creek’s sandy-marl soil shifts after heavy rain. We see hinge posts that were perfectly plumb six months ago suddenly leaning a half inch, which is enough to make a swing gate bind. We reset the post footing, correct the sag, and replace worn hinge bearings so the gate swings evenly again.
Operator and Control Board Replacement
Humidity corrosion is real here. Control boards and loop detectors fail more often in inland South Florida than they do in drier climates. We test the board before recommending replacement, because sometimes the fix is a $30 relay and not a $400 board.
Gate Welding in Coconut Creek
Gate Welding in Coconut Creek typically means repairing cracked wrought-iron or aluminum gate frames on older villa and single-family properties, or reinforcing sagging gate frames on high-traffic community gates. Most weld repairs run between $150 and $350 per crack or joint, depending on access and whether we need to remove the gate leaf or can weld in place. Full gate frame reinforcement for a sagging community gate runs higher, usually $500 to $900.
We quote the welding job in writing too. You’ll know the exact number before any sparks fly.
Frame Reinforcement for High-Cycle Gates
The entry gates at Wynmoor Village and Century Village cycle hundreds of times a day. That constant motion stresses welds and frame joints in ways a residential driveway gate never sees. We reinforce cracked welds and add gusset plates where the frame is fatiguing, so the gate handles daily traffic without twisting.
Aluminum and Wrought Iron Repairs
Aluminum gates corrode differently in Coconut Creek’s humidity than steel does. We match the repair to the metal, use the right filler rod, and finish the weld so it doesn’t stand out. A clean weld matters on a gate people see every day.
Trusted Brands We Service in Coconut Creek
We’re factory-trained on the brands Coconut Creek communities and homeowners actually use. That includes FAAC, BFT, Linear, and Viking operators at community entries, plus LiftMaster and Ghost Controls on residential driveway gates. We stock common replacement parts for these brands locally in our South Florida service area, so a failed FAAC control board or a worn BFT rack doesn’t mean a two-week wait. When a Wynmoor or Century Village gate goes down, we can usually source what we need same day.
Common Gate Repair Problems We See in Coconut Creek Homes
- Hinge post settlement in sandy-marl soil. After a summer storm saturates the ground, gate posts can shift and lean, especially in western Coconut Creek near the older villa communities. The gate sags, binds at the latch, and the operator strains or trips its safety sensor.
- Corrosion on control boards and loop detectors. Inland South Florida humidity and daily afternoon thunderstorms shorten the life of exposed electronics. Intermittent failures where the gate opens sometimes and not others are usually corrosion, not a broken board.
- High-cycle operator wear at 55+ community entries. Wynmoor Village and Century Village entry gates see more daily cycles than almost any other residential gates in Broward County. Motors, gears, and racks wear out years earlier than they would at a single-family home.
- Obsolete electromechanical operators from the 1970s and 1980s. Many Coconut Creek condo and villa communities still run first-generation gate operators and intercoms that are now 30 to 50 years old. Finding parts takes specific knowledge, and we know which salvage sources and compatible retrofits actually work.
Pricing for Gate Repair in Coconut Creek, FL
Latch and hinge repairs in Coconut Creek typically run $150 to $300. Gate realignment runs $180 to $350. Operator repair or replacement runs $450 to $1,200 depending on brand and horsepower. Weld repairs run $150 to $900 depending on scope. These are honest ranges, not teaser numbers, and you’ll see your exact price in writing before any work begins. We don’t start anything until you approve the number. Estimates are free, and calling (626) 649-4572 costs you nothing but a few minutes.
We Also Serve Cities Near Coconut Creek
Our South Florida office dispatches technicians to Coconut Creek and the surrounding Broward communities. If you’re in Margate, Pompano Beach, Coral Springs, or Deerfield Beach, the same crew, same written-price promise, and same 365-Day Done Right Promise apply. Call (626) 649-4572 and a live person will schedule your visit.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Coconut Creek
We handle it by providing the HOA board or management company with a written scope of work, material specs, and finish details before any repair begins. Many Coconut Creek communities, especially Wynmoor Village and Century Village, need board sign-off before work starts, and we’re used to coordinating that. We can also provide documentation for community-approved vendor lists. Call (626) 649-4572 and we’ll walk you through what your board needs.
Because previous repairs likely fixed the visible sag without addressing the hinge post settlement in the saturated sandy-marl soil. If the post footing isn’t reset or reinforced, the gate will sag again within months. We reset the footing, correct the alignment, and only then touch the hinges or operator. Get an exact quote at (626) 649-4572.
Yes, we service and repair original electromechanical gate operators from the late 1960s through the 1980s in Coconut Creek condo and villa communities. We source parts through surplus channels and know which modern retrofits bolt onto the old mounting patterns without major concrete work. Call (626) 649-4572 with your operator’s make and model, and we’ll tell you what’s possible.
For a high-traffic community entry like those at Wynmoor Village or Century Village, a commercial-grade slide or swing operator from FAAC, BFT, or Viking is the right call. These are built for hundreds of daily cycles, unlike residential operators that wear out prematurely under that load. We’ll spec the right horsepower and duty cycle for your traffic volume. Call (626) 649-4572 for a site assessment and written price.
Yes, we install and repair keypad entry and intercom systems for gated communities in Coconut Creek, including the older intercoms still running at many 1970s and 1980s communities. We can retrofit modern keypad and phone-entry systems onto existing gate operators. Call (626) 649-4572 to schedule a walkthrough of your existing system.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Coconut Creek and Broward County since 2009.