Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Bee Cave
Gate repair in Bee Cave usually means one of three things: a post that has shifted in the Hill Country limestone, a swing gate that sags and drags on a sloped driveway, or an operator that trips on a 100°F afternoon. We handle all three, and we give you a written price before any work begins. Call (626) 649-4572 and a live person answers, day or night. Our crews know the specific failure patterns in Falconhead, Bella Colinas, and the older custom lots along Hamilton Pool Road, because we see them every week.
There is no voicemail tree here. You describe the problem, we schedule the visit, and a background-checked technician arrives in a marked vehicle with shoe covers, drop cloths, and the parts most Bee Cave gates actually need. The quote is in your hand before we touch a single bolt.
Why Latch & Post Gate Repair Is Bee Cave’s Preferred Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family, founded in 2009, and led by Cody Beckman. We are not a general handyman service that happens to hang gates. Every gate comes down to two parts – the latch that holds it and the post that carries it. That is the job we focus on. Our team is factory-trained on the equipment families actually own here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Bee Cave homeowners call us because a neighbor or an HOA manager told them we showed up on time, kept the driveway clean, and did not leave a mess in the flower bed. We lay drop cloths on the floor and put on shoe covers before we step inside your home for access panels or intercom wiring. A cleanup photo is taken before the technician leaves, and it is included, not billed as an add-on. The 365-Day Done Right Promise covers every repair and installation we perform here. If it is not right, we make it right. No argument, no fine print.
Scheduling and dispatch are coordinated from the Cedarwell Austin office, but the crews serving Bee Cave work these neighborhoods daily. That means when a gate fails on the hottest day of July, you are not waiting on a technician driving in from another county.
Driveway Gate Repair in Bee Cave
Driveway gate repair in Bee Cave often starts with a post problem, not a gate problem. The caliche underlayer beneath much of this ZIP code holds moisture and expands and contracts with the seasons. A heavy ornamental-iron swing gate mounted on a post set in caliche will slowly rotate that post out of plumb over ten or fifteen years. Once the post leans, the gate sags, the latch stops aligning, and the operator arm starts fighting the extra friction. The fix is not just a new operator – it is drilling out the old footing, breaking through the caliche, and setting the post so it stays put.
Post Reset and Hardware Alignment
When we reset a Bee Cave gate post, we hammer-drill the old footing, remove the failed concrete, and pour a new footing deep enough to anchor below the caliche layer. Then we re-hang the gate, true the hinges, and adjust the latch striker. Most standard gate-latch replacements in Bee Cave run between $145 and $285. A full post reset on a driveway gate, with concrete and alignment, typically falls between $600 and $1,400 depending on gate weight and access. You will see the exact number in writing before we start.
Realignment on Sloped Lots
The terraced lots in Bella Colinas and Falconhead West mean a lot of Bee Cave swing gates were installed on grades steeper than the manufacturer’s spec. Gravity never stops pulling. Over time, the gate leaf drifts downhill, the hinges wear unevenly, and the operator arm strips its gear assembly. We correct the sag, replace worn hinge bearings, and often recommend a slide gate conversion if the slope keeps killing operators. A conversion is not an upsell – on some lots it is the only repair that lasts more than a few summers.
Gate Welding in Bee Cave
Gate welding in Bee Cave is usually cosmetic until it is suddenly structural. Rust at the bottom rail of an ornamental-iron driveway gate, a cracked weld where the pickets meet the top frame, a hinge bracket tearing away from the stile – these start small and then fail fast once the Hill Country humidity and summer heat cycles work the crack open. We TIG and MIG weld on-site for most repairs, and we grind and repaint to match the existing finish. Falconhead and Bella Colinas HOAs often require a specific black or bronze powder-coat tone, so we match the color before we finish the job.
Weld Repair and Rust Remediation
Most gate welding repairs on Bee Cave driveway gates – a broken picket, a cracked hinge plate, a sagging frame joint – run between $220 and $550 per repair point. If rust has compromised a long section of the bottom rail, we cut out the section, weld in replacement steel, treat the surrounding metal, and repaint. That keeps the gate safe and keeps the HOA inspection clean.
Reinforcement and Gate Leaf Straightening
A gate that drags on the driveway because the frame has twisted out of square does not always need to be replaced. We brace the leaf, true the frame, and weld in a reinforcement gusset where the stress concentrates. That is often a $350 to $700 repair, and it buys the gate another five to ten years. We will tell you honestly if the steel is too far gone and a new leaf makes more financial sense than repeated weld patches.
Trusted Brands We Service in Bee Cave
We service and stock parts for the operators Bee Cave homeowners actually have on their driveways: LiftMaster, Linear, Viking, Ghost Controls, and DoorKing. That means most common failures – a stripped gear, a failed control board, a dead photocell – are fixed the same visit, not after a parts order. You will get the right repair for the brand on your gate, done by a technician trained on that specific equipment. Our Gate Repair team carries the common boards, capacitors, and safety sensors for these brands, so a tripping operator does not become a three-week waiting game.
Common Gate Repair Problems We See in Bee Cave Homes
- Shifting posts in caliche soil. The limestone and caliche underlayer beneath Bee Cave expands with moisture and contracts in dry heat. Over ten to fifteen years, a driveway gate post will slowly rotate or sink, and resetting it properly means drilling through rock, not just digging a deeper hole. Standard post-hole digging often requires hammer drilling before concrete can be set.
- Operator thermal cutoff on west-facing driveways. An operator sealed inside a dark metal housing on a west-facing Bee Cave driveway will repeatedly hit its thermal cutoff limit during June through September. The gate stops halfway and reopens, or it trips the panel. It looks like an electrical fault, but it is usually the motor overheating – and a vented housing or an operator rated for higher ambient heat is the real fix.
- Sagging swing gates on sloped lots. Terraced lots were often graded before the gate went in, and the gate footprint sits on a steeper slope than the manufacturer’s installation limits. The constant downhill pull burns out operator arms and strips gear assemblies years before the same unit would fail on a flat Austin lot. Slide gate conversion is frequently the better repair than another operator swap.
- HOA finish mismatches after weld repair. We see gates in Falconhead that had a prior weld repair done with a different black than the rest of the fence, and the homeowner had to repaint or redo the work after an HOA walkthrough. Matching the existing powder-coat tone and gloss level matters as much in Bee Cave as the structural weld itself.
Pricing for Gate Repair in Bee Cave, TX
Here is what Bee Cave homeowners typically pay us for common gate repairs. A standard latch or hinge replacement runs $145 to $285. Weld repairs on ornamental-iron gates run $220 to $550 per point. A full post reset with concrete and re-hanging a driveway gate runs $600 to $1,400 depending on gate weight and caliche conditions. Operator repairs – control boards, gear assemblies, thermal cutoff issues – run $280 to $850, and we tell you if the operator is worth repairing or if replacement makes more sense.
The difference in Bee Cave versus flatter neighborhoods is usually the footing work. Caliche drilling adds time, and time adds cost. That is not markup; it is the real work of drilling through rock. You will always see the exact price in writing before we begin, and we never start a job without your approval. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Bee Cave
Latch & Post also provides Gate Repair in Bee Cave to surrounding communities across the region. We serve homeowners in Houston, San Antonio, Dallas, and Fort Worth with the same written pricing, shoe covers, drop cloths, and 365-Day Done Right Promise. If you are in one of those cities, the same live-person scheduling line applies.
Serving Bee Cave, TX - Our Local Coverage Area
We’re based in the Bee Cave area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Bee Cave
The post keeps shifting because the footing is sitting in caliche, the limestone-based subsoil that underlies much of Bee Cave. Caliche expands and contracts with moisture changes, which slowly loosens the concrete around the post. The fix is not a deeper hole in the same spot. The old footing needs to be hammer-drilled out, the caliche broken through, and a new footing poured below the reactive layer. A technician who does not know Bee Cave soil will reset the post and see it lean again in two years. Call (626) 649-4572 and we will assess the footing before we quote the reset.
On a west-facing Bee Cave driveway, a LiftMaster operator that trips on summer afternoons is usually not failing; it is overheating. The motor sits inside a sealed metal housing, the housing bakes in 100°F-plus afternoon sun, and the internal thermal cutoff shuts the unit down to protect itself. The long-term fix is often a vented housing, a shade shroud, or an operator rated for higher ambient heat, not a new control board. We will diagnose it before we quote anything.
It changes everything. A swing gate on a slope steeper than the manufacturer’s installation limit carries a constant downhill gravitational load. That load strips gear assemblies and burns out operator arms years ahead of schedule. If your gate has failed more than once on the same slope, a slide gate conversion is usually the repair that lasts, rather than another operator swap. We will measure the grade and give you both options in writing.
Most Falconhead and Bella Colinas HOA architectural control committees require gate repairs and replacements to match the approved community finish – typically a specific black or bronze powder-coat tone and a defined style profile for pickets, rails, and hinges. A structurally sound weld repair with the wrong finish can be rejected at inspection. We match the existing finish before we complete any weld repair or hardware replacement. We also handle the documentation the HOA asks for.
Yes. Automatic gates in Bee Cave are subject to UL 325 entrapment protection requirements, which include monitored photocells, contact edges on the closing and opening edges, and audible or visual warning devices when the gate is in motion. If your operator predates 2016, it may not meet current standards. We check entrapment protection on every automatic gate repair, and we will tell you if upgrading a photocell or adding a contact edge is required for code compliance. Call (626) 649-4572 for an appointment.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Bee Cave since 2009 as part of the Cedarwell family of independently owned and operated gate specialists.