Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Clermont, FL
Most Clermont gate problems come down to two things: slope-driven stress on hardware and lightning-fried circuit boards. You’ll find both here more than anywhere else in Central Florida, because Clermont’s hills make every gate work against gravity and its summer storms hammer electronics from June into September. Call Latch & Post Gate Repair at (626) 649-4572 and a real person answers, day or night. We’ll give you a written price before any work starts.
Why Clermont Homes Are Different
Clermont sits on the Lake Wales Ridge, and that changes gate work in ways flatland technicians never see. Driveways in Legends, Waterbrooke, and Highland Lakes follow the slope of the hill, which means swing gates carry weight unevenly and slide gates run slightly uphill or downhill all day. The sandy Ridge soil settles seasonally too, so a post that was plumb two years ago leans just enough to bind the gate or throw the track out of alignment. Then the lightning arrives. Daily summer storms kill operator boards and keypad circuits routinely. A gate that worked fine at breakfast stops responding by late afternoon, and the repair is rarely the gate itself. It’s the board.
Older blocks near downtown and along the chain of lakes have different stock: wood and chain-link gates from the 1970s and 80s, many never automated. Those jobs are about stubborn hinges, rotted posts, and sagging pickets. The HOA entries are heavier iron, often with V-groove rollers that grind and overload motors once the sand beneath shifts. We see that failure pattern in Clermont constantly, and almost never in the flat subdivisions a few miles away.
Our Main Clermont Services
Two calls dominate Clermont: a gate that won’t open after a storm, and a new gate for a growing family. Everything we do is covered by the 365-Day Done Right Promise and starts with a written price.
Gate Repair in Clermont
When a gate drags on the ground or the hinges groan every time the kids come through, the cause is usually uneven grade plus years of daily use. We’ll pull the post back to plumb, re-hang the gate, and replace worn hinges or rollers with parts matched to what’s already there. Before we step inside your yard or home, we put on shoe covers and lay drop cloths where we’re working. The price is in your hand before a tool comes out. Most Clermont repairs finish in a single visit. Gate Repair in Clermont
Gate Installation in Clermont
A new gate on a Clermont slope needs concrete thinking about the post footers. We dig deeper than the flat-ground standard because Ridge soil moves, and we set posts so the gate swings or slides true from day one. You choose the material and style. We handle the frame, the hardware, and the finish work, plus a cleanup photo before we leave so you can see the yard as we found it. Written price first, always. Gate Installation in Clermont
Electric Gate Repair in Clermont
Lightning and sandy soil make Clermont electric gate repair a specialty. We troubleshoot FAAC, BFT, Linear, and Viking boards, keypads, remotes, and safety edges, then replace the failed component rather than selling you a whole new system. If the operator is obsolete, we’ll say so plainly and quote a replacement in writing. Our technicians are factory-trained on the brands listed, so the diagnosis happens once. Electric Gate Repair in Clermont
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Clermont
We’re factory-trained on FAAC, BFT, Linear, and Viking, and we stock common boards, remotes, and safety edges locally for fast Clermont turnaround. Most electric repairs complete the same trip. See our brands for the full list.
Pricing for Gate Company in Clermont, FL
Everything below is quoted in writing before any work begins, and the number on the quote is the number on the invoice.
| Service | Typical range in Clermont |
|---|---|
| Gate latch replacement | $85 - $190 |
| Hinge replacement (pair) | $120 - $260 |
| Gate post reset (single post) | $240 - $520 |
| Sagging gate re-hang and alignment | $160 - $340 |
| Wood gate section replacement | $180 - $400 |
| Chain-link gate rebuild | $230 - $480 |
| Operator circuit board replacement | $220 - $550 |
| Safety edge or photo-eye replacement | $130 - $290 |
| Keypad replacement | $110 - $250 |
| Full operator replacement (parts and labor) | $650 - $1,400 |
What moves a Clermont price toward the top of any range is slope: a post reset on a 15-degree driveway takes more concrete and more time than the same job on flat ground. We never charge for a second opinion, and the written price is yours to keep whether you book the work or not.
Neighborhoods We Serve in Clermont
We work throughout Clermont, from the lakefront blocks near downtown to the HOA entries and driveway gates across the ridge. You’ll also see us in the older subdivisions where wood gates still outnumber iron.
- Legends
- Waterbrooke
- Highland Lakes
- Downtown Clermont and the chain of lakes
- Hunters Run
We schedule Clermont calls on a single route, which keeps response times predictable across the area.
Service Area – Cities Near Clermont
Our Clermont route also covers Minneola, FL, Groveland, FL, Oakland, FL, and Mascotte, FL. If you’re just over a city line, call and ask. We’ll tell you honestly which day we can be there.
Serving Clermont, FL - Our Local Coverage Area
We’re based in the Clermont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clermont
We schedule Clermont calls on a route that covers the whole city and nearby towns, which means most visits happen within a day or two. Storm-season electric failures get priority because a gate that won’t open often traps a car inside. Call (626) 649-4572 and we’ll give you a straight answer on when we’ll arrive.
Many Clermont communities have design standards for entry and driveway gates, especially in master-planned subdivisions like Legends and Waterbrooke. Most repairs that match the existing gate don’t need approval, but a full replacement or a new operator might. Check your HOA’s covenants first; we’ll match materials and style to what’s already approved.
Yes. We wear shoe covers inside the home, lay drop cloths where we work, and use quiet tools when someone’s napping. If you have a dog, just tell us when you call and we’ll make sure the technician knows before knocking. The price doesn’t change for any of this; it’s standard on every visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clermont Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco