Gate Repair in Aubrey - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Repair Across Aubrey

Gate repair in Aubrey typically runs $180 to $340 for a standard latch or hinge fix, and $450 to $1,100 for electric gate operator work. Most jobs on acreage lots west of US 377 or in newer HOA communities like Sandbrock Ranch can be quoted the same day you call. Our Gate Repair team works across Aubrey’s full split of ranches and master-planned neighborhoods, and we quote a written price before any work begins. Call (626) 649-4572 if your gate is sagging, sticking, or refusing to open.

Call (626) 649-4572

Why Latch & Post Gate Repair Is Aubrey’s Preferred Gate Repair Company

Aubrey homeowners keep our number for one reason: we treat the house the way we’d treat our own. Every technician arrives in uniform, puts on shoe covers and lays down drop cloths before stepping inside, and sends a photo of the cleanup before leaving. That’s the Cedarwell C.A.R.E. routine – clean up like it’s our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work. No other gate company in Aubrey documents the cleanup.

Cody Beckman leads our Aubrey crews with the same standard we’ve held since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. We’re factory-trained on the operators Aubrey actually runs: FAAC, BFT, Linear, Viking, and others. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, and our crews serve Aubrey locally. The 365-Day Done Right Promise backs every repair and installation. If it isn’t right, we make it right – no argument, no fine print.

Wrought Iron Gate Repair in Aubrey

Wrought iron gate repair in Aubrey is the work we’re called for most in the newer HOA communities, where ornamental iron automated gates were installed as standard features and are now entering their first service cycle. Repair here usually means realigning the rack and pinion drive, resetting limit switches after a wet-dry cycle, or addressing a safety photocell that keeps tripping. Most wrought iron gate repairs in Aubrey run $220 to $380 for mechanical realignment, and the operator side adds $300 to $600 when a control board or drive component fails.

Realigning and Re-hanging Ornamental Iron

In subdivisions like Sandbrock Ranch, the engineered pads settle slightly after the first Blackland Prairie wet-dry cycle. That small shift is enough to bind an ornamental iron slide gate on its track. We correct post footing alignment, re-tension the drive, and reset operator limits before the hardware gets damaged.

Safety Photocell and Limit Switch Work

Nuisance trips on safety photocells are a common symptom of early settling on new automated iron gates. We align the photo eyes, verify the entrapment protection circuit, and clean the sensors. The gate should then run its full travel without stopping halfway.

Metal Gate Repair in Aubrey

Metal gate repair in Aubrey spans the whole range from decades-old welded pipe swing gates on equestrian acreage to the lighter aluminum systems going in on newer lots. On the ranch side, the typical ticket is a hinge post heaved several inches off vertical by Blackland Prairie clay swelling and contracting – we re-plumb the post, re-hang the gate, and reset the opener limits. Typical metal gate repair in Aubrey runs $180 to $340 for hinge and post work, and $250 to $500 when we weld cracked joints or replace rusted sections.

Hinge Post Re-plumbing on Clay Soil

West of US 377, we regularly see pipe-frame gates where years of expansive clay movement have tilted the hinge posts enough that the gate sags and drags. We dig and re-set the post, true it vertical, and re-hang the gate so it swings clean. This is structural work, not a quick patch.

Weld Repair and Rust Treatment

Welded steel gates on acreage lots slowly rust at the bottom rail joints where moisture collects. We grind back the affected joint, weld it solid, and treat the area. The gate gets years more service instead of a full replacement quote.

Trusted Brands We Service in Aubrey

We’re factory-trained on the operators Aubrey homeowners and ranchers actually own, and we stock local parts in our Dallas-Fort Worth metro parts shelf for faster turnaround on Aubrey jobs. That means no waiting a week for a FAAC control board or a BFT limit switch to ship from out of state. We service Linear and Viking openers frequently on acreage properties, and we carry the common drive components for each. Call (626) 649-4572 and a live person answers around the clock.

Common Gate Repair Problems We See in Aubrey Homes

• Clay-heaved hinge posts on acreage lots. The Blackland Prairie soil under Aubrey swells and contracts with every wet-dry cycle, gradually pushing pipe-frame posts out of plumb. Re-hanging the gate and resetting the operator is often the only durable fix.
• Settling ornamental iron gates in new HOA communities. In Sandbrock Ranch and similar post-2018 subdivisions, the gate hardware is still within its first service cycle. Small pad settlement causes rack and pinion misalignment and nuisance safety photocell trips.
• Hail and hard freeze damage to operator housings. Spring hail cracks plastic housings and takes out control boards. The February 2021 freeze iced tracks on automated slide gates and left several Aubrey properties with dead operators.
• Solar opener batteries and panels aging out. Early-generation solar openers on rural acreage are reaching the end of their battery life. We can often replace the battery and re-angle the panel instead of swapping the whole opener.

Pricing for Gate Repair in Aubrey, TX

We Also Serve Cities Near Aubrey

Our Gate Repair crews handle Aubrey and the surrounding area, including Frisco, Little Elm, Denton, and Prosper. If you’re in any of these nearby cities, you can reach the same Cedarwell C.A.R.E. team and the same written-price guarantee. Aubrey is home base for this page, but we’re on the road daily through the northern metro.

FAQs About Gate Repair in Aubrey