Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Aldine
Gate repair in Aldine follows a pattern most suburban markets don’t see. This is an unincorporated Harris County community with a dense industrial and logistics corridor, which means a disproportionately large share of our calls here involve heavy-duty commercial sliding gates at warehouses, trucking yards, and storage facilities rather than residential swing gates. On top of that, Aldine sits within multiple Harris County floodplains, and recurring flood events routinely submerge automated gate operators and warp sliding-gate tracks. If your gate won’t open, drags, or the operator just hums, call us at (626) 649-4572. We’ll give you a written price before we touch anything.
Why Latch & Post Gate Repair Is Aldine’s Preferred Gate Repair Company
Aldine homeowners and property managers don’t need a gate company that treats every job like a suburban tract home. They need someone who knows that the gate off Aldine Bender Road serves a trucking yard, not a minivan. Our Gate Repair team works exclusively on gates: swing gates, slide gates, automated operators, hinges, posts, and the low-voltage electronics that drive them. Latch & Post Gate Repair has been part of the Cedarwell family since 2009, and every technician arrives background-checked and in uniform.
We answer every call with a live person, 24 hours a day, seven days a week. No voicemail, no call-back queue. When your yard gate won’t close and a shipment is due at 6 a.m., you get someone on the line who can start triage immediately. Aldine’s tight shared driveways and rights of way mean a gate that won’t cycle can block vehicle access for an entire property. We schedule around that reality.
Our Aldine customers regularly tell us the two things that mattered most: the written price came before any work started, and the technician left wearing shoe covers and laid down drop cloths before stepping inside. That’s the Cedarwell C.A.R.E. Promise, and it’s non-negotiable on every visit. Cody Beckman, our owner, put one rule in writing years ago: clean up like it’s our own home, and explain the price before the work begins.
Commercial Gate Repair in Aldine
Commercial Gate Repair in Aldine is a different discipline than residential work. The industrial corridor along Aldine Bender Road, North Sam Houston Parkway East, and the trucking yards near JFK Boulevard relies on slide gates that cycle dozens or hundreds of times a day. A gate that fails here isn’t a convenience issue, it’s an access failure for commercial operations. Most commercial slide gate repairs in Aldine run between $380 and $950 depending on whether we’re clearing debris from the track, replacing a seized rack and pinion section, or rebuilding the operator’s low-voltage board. Flood-submerged operators push toward the higher end because the board, transformer, and limit switches often fail together.
Flood-Damaged Operators and Track Restoration
Floodwater is our most common commercial enemy in Aldine. Hurricane Harvey submerged hundreds of gate operators across Harris County, and every storm season since has done the same on a smaller scale. Water kills low-voltage electronics and deposits silt, gravel, and trash into slide-gate tracks. We pull the track, clear it completely, replace any corroded wiring and board components, and realign the rack so the gate cycles without binding. We can usually do this without shutting down the truck entrance. Our crews work from the side of the track and stage tools off to the curb so one lane stays open.
Tight Right-of-Way Access Repairs
Many Aldine commercial properties were built decades ago, when trucks were shorter and property lines tighter. There’s often no room for a swing gate arc, so slide gates run on tracks squeezed against fences and retaining walls. When rust or misalignment seizes the rack and pinion in that restricted space, the repair takes patience and specific tooling. We’ve rebuilt rack sections on gates where we had 14 inches of working clearance on one side. Most rack and pinion repairs in these conditions fall between $300 and $700 in Aldine, depending on how much of the rack needs replacement. You’ll see the exact number in writing before we start.
Iron Gate Repair in Aldine
Iron Gate Repair in Aldine deals with the same forge-welded steel and wrought-iron gates you’d see anywhere in Houston, but Aldine’s subtropical humidity makes rust the constant adversary. Steel and wrought iron both fail here faster than in drier climates. Surface rust that starts as a cosmetic issue eats into weld joints, hinge barrels, and lock hardware within a few seasons. A typical iron gate repair in Aldine, like rewelding a broken hinge barrel or replacing a rusted frame section, runs between $250 and $575. Full gate realignment of an iron swing gate with rust-damaged hinges and a sag measure goes higher, $400 to $850, because we’re correcting both the metal and the geometry.
Hinge and Post Restoration on Older Ranches
Aldine’s residential stock is dominated by modest 1960s to 1980s slab-foundation brick-veneer ranch homes, many with chain-link perimeter fencing and basic swing gates on driven steel posts. Those posts sit in Houston-area gumbo clay. The clay expands dramatically when wet and shrinks in drought. A driveway swing gate that latched perfectly in August will drag the concrete and refuse to close by January after winter rains heave the posts. We realign the hinges, reset or replace the posts, and build in just enough adjustment so the gate survives the next clay cycle. Post reset and hinge rebuild on an Aldine ranch home typically costs $350 to $750.
Weld and Rust Repair
Rust near the base of an iron gate is common where sprinkler overspray, pooled rain, and Aldine’s humidity meet. We grind out the rust, assess how much metal remains, and either weld in new plate or replace the compromised rail. When the damage is caught early, this is a $180 to $420 repair. If too much steel is gone, replacement of the gate leaf is the honest recommendation, and we’ll tell you that rather than patch something that won’t hold. Weld and rust repair on Aldine iron gates usually takes two to four hours per leaf, depending on the condition and the size.
Trusted Brands We Service in Aldine
We’re factory-trained on the gate operators and controls families actually own in Aldine, including FAAC, BFT, Linear, and Viking. Commercial gates along the industrial corridor run FAAC and BFT hydraulic operators more than anything else, while residential automatic gates in Aldine’s ranch neighborhoods lean toward Linear and Viking control boards. We keep common replacement boards, limit switches, and safety-edge parts stocked, and what we don’t have locally, we can usually have the next morning. You won’t wait a week for a control board. Our technicians are trained on these four brands plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the diagnosis is usually right on the first visit.
Common Gate Repair Problems We See in Aldine Homes
- Clay-heaved hinge posts. Aldine’s expansive gumbo clay expands when wet and shrinks in drought, so driven steel posts on 1960s and 1970s ranch homes work loose over the years. A gate that latched cleanly in August drags the concrete by January, and post realignment becomes a repeat call rather than a one-time fix.
- Flood-damaged operator electronics. Aldine’s floodplain geography means low-voltage gate-operator boards, transformers, and limit switches get submerged during major storm events. The gate may still have power, but the board won’t communicate, and the operator won’t cycle.
- Debris-packed slide-gate tracks. In Aldine’s warehouse and trucking yards, slide gates run close to the ground and collect silt, gravel, and trash every time water moves through the area. Debris jams the track, bends the rack, and eventually seizes the pinion.
- Tight rights-of-way forcing slide gates. Many Aldine properties share narrow driveways where there’s no room for a swing gate arc. Slide gates handle the space constraint, but rust and misalignment in such a restricted track bring the gate down faster than a swing gate would fail in a roomier yard.
Pricing for Gate Repair in Aldine, TX
Here’s what we’ll quote, in writing, before we begin any work in Aldine. Simple hinge and latch adjustments on residential gates run $150 to $300. Weld repairs on rusted iron gates run $180 to $575 depending on the size of the repair. Full hinge and post realignment on homes with clay-heaved posts costs $350 to $750, and commercial slide-gate track clearing with rack realignment runs $380 to $950. Flood restoration of a submerged operator, including the board and limit switches, typically lands between $500 and $1,200 depending on the brand and what actually failed. Every quote is agreed in writing before any work starts. Free estimates are standard. Call (626) 649-4572 for an exact number on your gate.
We Also Serve Cities Near Aldine
Most of our Aldine customers already know us as the local Gate Repair in Aldine crew. For commercial property managers and homeowners with sites in neighboring markets, we also schedule work in Houston, San Antonio, Dallas, and Fort Worth. If your property sits just outside Aldine but still needs a gate specialist, call us and we’ll confirm service for your address.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aldine
Aldine’s unincorporated Harris County status and its dense industrial and logistics corridor mean warehouses, trucking yards, and storage facilities make up a much larger share of gate-repair calls here than in neighboring incorporated suburbs. These are almost all slide gates on tight shared driveways, and they fail from flood debris, rust, and rack-and-pinion wear. Most commercial slide gate repairs in Aldine run $380 to $950. Call (626) 649-4572 and we’ll give you a written price before we start.
Aldine sits on expansive gumbo clay that swells when wet and shrinks in drought. Your driveway swing gate might latch cleanly in August and drag the concrete by January. The posts heave out of plumb, the hinge line shifts, and the gate won’t close. Post realignment in Aldine’s ranch neighborhoods typically runs $350 to $750, and we build in adjustment so the gate survives the next wet-dry cycle.
The most common failure after a flood in Aldine is a drowned low-voltage board, often with a failed transformer and corroded limit switches. The operator may still have line power, but the control board won’t respond. We replace the board, check every limit and safety circuit, and clear debris from the track. Flood restoration of an operator usually runs $500 to $1,200, and we’ll quote it in writing before any work begins. Estimates are free.
Yes. Automatic gates in Aldine, like all of Harris County, must comply with UL 325 entrapment-protection requirements, which means photo eyes, safety edges, and proper force settings. It’s a safety issue first. A gate without functioning entrapment protection can injure a child, a pet, or a driver. We check every safety device on every automatic gate repair and include the cost in the written quote before we start. Call (626) 649-4572 for an assessment.
Usually, yes. We got a call off Aldine Bender Road at a trucking yard where a LiftMaster gate operator had been submerged during a flood event and the slide gate track was packed with silt and debris. The gate wouldn’t close, and the rack and pinion was seized. We pulled the track, cleared the debris, replaced the operator’s low-voltage board, and realigned the rack so the gate cycled clean, all without blocking the yard’s truck entrance during the work. Most commercial track and rack repairs in Aldine can be staged to keep one lane open. Tell us what needs to keep moving and we’ll work around it.
Call Latch & Post Gate Repair in Aldine
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. Whether it’s a flood-submerged operator at a trucking yard, a clay-heaved hinge post on a 1970s ranch home, or a slide gate rusted tight on a shared driveway, we’ll quote a written price, lay down drop cloths and put on shoe covers before we step inside, and send you a photo of the cleanup before we leave. The 365-Day Done Right Promise covers every repair and installation: if it isn’t right, we make it right, no argument, no fine print. Call (626) 649-4572 for a free estimate in Aldine today.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Aldine with gate repair, gate installation, and electric gate repair since 2009.