Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Arcadia, CA
Gate work in Arcadia runs heavier and more custom than almost anywhere else in the San Gabriel Valley. North of Huntington Drive, the housing stock shifts to large two-story estates, many with oversized wrought-iron and steel driveway gates that weigh far more than a standard residential operator is built to handle. South of Foothill Boulevard, you find the opposite: 1950s and 60s ranch homes with older, undersized swing gates that owners are upgrading one by one. Add Santa Ana winds against the mountain front and hard water that accelerates rust, and you have a city where gate repair is genuinely its own specialty. We work on all of it, and you can reach us at (626) 649-4572 any hour.
Why Arcadia Homes Are Different
Arcadia’s housing stock tells two stories. The north side, roughly above Foothill Boulevard, was extensively rebuilt between the mid-1990s and 2010s. Those homes are large, two-story, and almost all of them have an automated driveway gate as a standard part of the build. Many of those gates are heavy steel or wrought iron swing gates that a stock residential operator was never really rated to move. When a Viking or Linear Apollo unit gives out under that load, the repair is not a simple swap: the operator, the hinges, and the post anchors all need to be checked together.
On the flatter south side, the older ranch homes often still have their original swing gates, and the hardware is tired. The San Gabriel Valley’s hard water does not help: it accelerates surface rust and pitting on steel frames, hinge pins, and post hardware faster than you would see in coastal LA County. And when a Santa Ana wind event comes down out of the San Gabriels, a heavy gate that is already binding can slam hard enough to bend a hinge or strip a gear. We see those failures in clusters after wind storms.
Our Main Arcadia Services
Most calls from Arcadia homeowners come down to two things: a gate that no longer opens or closes the way it should, or a gate that was never right for the house to begin with. Each service has its own detailed Arcadia page below.
Gate Repair in Arcadia
Most repair calls in Arcadia start with a swing gate that has gone out of plumb or an operator that is grinding under the weight of a heavy steel gate. Wind exposure near the foothills and hard-water rust on hinges and post hardware make both problems more common here than in flatter, milder nearby cities. We stock the hinge assemblies, operator parts, and post hardware that Arcadia’s older custom gates actually use. See the full Gate Repair in Arcadia page for specific sub-jobs and price ranges.
Gate Installation in Arcadia
A new gate in Arcadia usually means matching the scale of the house and the street. North-side estates call for heavier steel or wrought iron with operators sized for the actual gate weight, not a generic residential rating. South-side ranch homes often need a cleaner, simpler swing gate that finally matches the home’s proportions. We measure, quote in writing, and schedule the work without pressure. See the full Gate Installation in Arcadia page for what a full install includes and what it costs here.
Electric Gate Repair in Arcadia
Electric gate repair in Arcadia is frequently about the operator, the loop detectors, or the safety edges. A large share of north Arcadia’s custom gates were installed during the 2000s building boom with Viking Access or Linear Apollo operators, and many of those units are now aging out in close succession. We carry the parts for those specific brands and the wiring practices to fix them right. See the full Electric Gate Repair in Arcadia page for operator brands, sub-jobs, and local pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Arcadia
We service the gate operators and hardware that Arcadia homes actually have: Viking, Linear, DoorKing, and Ghost Controls among others. Because so many north Arcadia gates were built with the same small group of iron shops, we keep the common Viking and Linear parts on hand, which shortens repair turnaround for many of our Arcadia customers. See our brands for the full list of equipment we support.
Pricing for Gate Company in Arcadia, CA
| Service | Typical range in Arcadia |
|---|---|
| Gate repair service call | $75-$125 |
| Standard gate latch replacement | $140-$240 |
| Heavy wrought iron latch replacement | $195-$320 |
| Gate hinge replacement (pair) | $180-$380 |
| Gate post reset or replacement | $350-$750 |
| Gate wheel replacement (cantilever or sliding) | $180-$350 |
| Automatic gate operator replacement | $800-$1,800 |
| Electric gate control board replacement | $350-$750 |
| Safety sensor or photo eye replacement | $180-$340 |
| Gate installation (standard single swing) | $1,400-$2,800 |
| Gate installation (custom double swing, steel or wrought iron) | $3,500-$8,000 |
| Full electric gate system (operator, loops, safety edges) | $2,200-$6,500 |
What pushes prices toward the higher end in Arcadia is the gate itself: heavier steel, wider driveway openings, and custom scrollwork all add labor and require stronger operators. Every quote is written, delivered before any work starts, and agreed to before we touch the gate.
Neighborhoods We Serve in Arcadia
We work across all of Arcadia, from the foothill estates north of Foothill Boulevard to the ranch neighborhoods south of Huntington Drive. Because our technicians are locally dispatched, response for most Arcadia service calls is same-day or next-day.
- Upper Rancho
- Santa Anita Oaks
- Highland Oaks
- The Colony
- Baldwin Stocker
Service Area – Cities Near Arcadia
We also serve the surrounding San Gabriel Valley communities. If you’re in Monrovia, CA, Temple City, CA, Sierra Madre, CA, or San Gabriel, CA, the same team and the same written-price promise apply. Our Los Angeles office coordinates scheduling, and crews serve Arcadia locally.
Serving Arcadia, CA - Our Local Coverage Area
We’re based in the Arcadia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Arcadia
Most Arcadia service calls are handled same-day or next-day. If a gate is stuck open or a car is trapped behind it, we prioritize those calls. Call (626) 649-4572 and a live person will answer, day or night.
Many north Arcadia neighborhoods have active HOAs with specific gate height, style, and color requirements. If you are replacing a full gate, check your HOA’s architectural rules first. We can work from approved plans and match existing neighborhood standards.
Yes. Many of Arcadia’s custom gates came from a small group of local and City of Industry iron shops during the 2000s building boom. We recognize those builds, their hinge assemblies, and their typical operator brands, which means fewer trips back for parts. Call (626) 649-4572 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arcadia Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco