Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Union City
Gate installation in Union City usually means working with a passage, not a driveway. Most homes here are attached row houses built to the lot line, so there’s rarely room for a swing gate to arc open. You need a slide gate that hugs a party wall or a pedestrian iron gate set tight between two buildings. We’ve been doing exactly that work since 2009, and we know how Union City’s narrow passages, shared rights of way, and Hudson River humidity shape every install. Call (626) 649-4572 for a written quote before any work starts.
Why Latch & Post Gate Repair Is Union City’s Preferred Gate Installation Company
Union City homeowners call us because we treat the tight spaces between attached buildings as the actual job site, not an obstacle. On a block off Bergenline Avenue where two row houses share a four-foot passage, the gate has to open without scraping the neighbor’s stucco. That’s the kind of install we measure twice. Cody Beckman runs our team with one rule: the passage stays usable for the neighbors while we work, even if that means staging the job so one side is always open. We’re a Cedarwell-family gate specialist, not a general contractor. Gates are all we do.
Every Union City job includes the Cedarwell Care Promise: a written price before we touch anything, shoe covers and drop cloths inside your home, and a photo of the cleanup before we leave. Your floors stay clean, your pets stay safe, and you know the exact number before the first bolt comes off. We answer the phone live around the clock, and our technicians are background-checked and uniformed. When we say we’ll be there, we mean it.
We’re part of the Cedarwell family of independently owned and operated gate specialists, and our Gate Installation team works exclusively on gates: pedestrian, driveway, sliding, swing, and security. That focus is why Union City homeowners see us handle a rusted iron gate between two tenements the same day someone else is still trying to figure out who to send.
Driveway Gate Installation in Union City
Driveway gate installation in Union City nearly always means a slide gate. On the rare lot with space for a car, the driveway usually runs tight along a party wall, and a swing gate would arc straight into the neighbor’s building. So we install slide gates sized to the opening, with the track set low and the operator tucked against the wall. A typical driveway slide gate install in Union City runs $2,400 to $4,800, including the gate, operator, keypad, and safety edges. You’ll see the exact number in writing before we order anything.
Slide Gates for Tight Driveways
We measure the full width of the opening plus the wall space needed for the gate to retract. On a shared driveway, that retraction space is often the dealbreaker: the gate needs to disappear fully so the neighbor’s car can still pass. We set the track flush with the paving so snow and salt don’t bind it in winter.
Pedestrian Gates Between Buildings
Many Union City homes tuck the garbage cans and rear access behind a narrow iron gate between two attached buildings. We hang those gates plumb against the party wall, often replacing an old swing gate with a slide gate because the swing arc has been scraping brick for decades. The cost for a pedestrian gate install with new posts runs $1,100 to $2,600 depending on width and hardware.
Sliding Gate Installation in Union City
Sliding gate installation in Union City is the default solution when there’s no room to swing. The gate travels along a track parallel to the wall, so it opens without ever crossing the neighbor’s side of the passage. That matters on the shared driveways and rights of way that run behind blocks of attached row houses, where a swing gate would block the only route to a rear yard. A typical sliding gate install in Union City runs $2,600 to $5,200, including the operator, safety photocells, and a keypad or intercom. The quote comes in writing before we start.
Rack and Pinion Operators for Narrow Passages
We install rack and pinion operators because they handle the salt and urban grime that build up on Union City gate tracks. The rack bolts to the gate itself, and the pinion drives it along the track. When a passage sits in shade all day between two buildings, the operator stays dry and the main wear point is the rack, which we replace without touching the motor.
Safety Edges and Photocells
Every automatic slide gate we install in Union City includes a safety photocell across the opening and a pressure-sensitive edge on the leading edge of the gate. If a kid or a pet crosses the path, the gate reverses. That’s not an add-on. It’s part of the install.
Trusted Brands We Service in Union City
We’re factory-trained on the operators Union City homeowners actually own. That includes Linear, Viking, and Ghost Controls automatic gate openers, plus DoorKing for the heavier slide gates and commercial security installs along Bergenline Avenue. We carry common parts for these brands in our service vehicles, so a replacement board or sensor doesn’t mean waiting a week. Most repairs and installs get finished the same day we arrive. You don’t pay extra for that. It’s just how we work.
Common Gate Installation Problems We See in Union City Homes
- Rusted iron gates between attached buildings. Salt-laden humidity off the Hudson River settles in narrow passages where sunlight never reaches, pitting wrought iron faster than in inland NJ towns. We replace the worst sections and treat the rest before hanging a new gate.
- Swing gates scraping party walls. On a shared driveway or right of way, a swing gate’s arc crosses into the neighbor’s space. We swap it for a slide gate and keep the passage open for everyone while we work.
- Roll-down security gates on Bergenline Avenue storefronts. The daily cycling of those gates on the busiest pedestrian strip in New Jersey means broken slats, spring bottom-rail damage, and burned-out motors are constant. We stock the slats and springs to get a shop locked back up the same day.
- Frozen hinges and warped frames in north-facing passages. Winter freeze-thaw cycles seize hinges that sit in permanent shade between buildings. We replace them with sealed bearing hinges and set posts deeper when the ground has settled.
Pricing for Gate Installation in Union City, NJ
A standard pedestrian gate install in Union City runs $1,100 to $2,600. Slide gate installs run $2,600 to $5,200, and driveway slide gates run $2,400 to $4,800. The wide range comes down to width, the operator you choose, and whether we’re pulling old posts or pouring new footings. On a settled passage between two attached buildings, we often pour a deeper post footing than the old gate had, and that adds a little to the cost but stops the gate from sagging again. Every quote is written, and you approve it before any work starts. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Union City
Our Union City customers often have family across the Hudson County line, so we also cover Hoboken, North Bergen, Jersey City, and Bayonne. Same crew, same written-price promise, same shoe covers on your floors. If you’re in one of those cities and need a gate hung or an operator replaced, call us at (626) 649-4572.
Serving Union City, NJ - Our Local Coverage Area
We’re based in the Union City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Union City
Almost never. A swing gate needs open space to arc into, and a shared driveway on an attached lot doesn’t have that space. A slide gate runs parallel to the wall and keeps the full passage open for the neighbor. We’ll measure the opening and tell you straight if a swing gate will fit, but in Union City the answer is usually a slide gate.
It stays open the entire time. We stage the work so one side of the passage is always usable, even while we’re pulling old posts and setting new footings. On a shared-driveway block off Bergenline Avenue, we kept tenants walking through the whole day by working one side at a time. Nobody gets locked out of their rear yard because we’re on the job.
The Hudson River puts salt-laden humidity into every narrow shaded passage in Union City, and urban particulate pollution sits on the iron year-round. Gates that face north never dry out, so rust and pitting accelerate. We treat the metal, replace the worst sections, and use sealed hardware that survives the local air better than the original.
Yes. Every automatic gate we install includes a safety photocell across the opening and a pressure-sensitive edge on the leading edge. If a child or pet crosses, the gate reverses. We also set the force limits low so the gate stops if it meets resistance. That’s not negotiable, and it’s included in the written price.
A slide gate travels on a track along the wall, so it needs only the gate’s own width of flat wall space to retract against. A swing gate needs a clear arc half the gate’s width in front and behind, which Union City alleys between attached buildings never have. For a four-foot passage between two row houses, a slide gate opens fully while a swing gate scrapes the wall. Call (626) 649-4572 and we’ll measure your alley and put the right answer in writing.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Union City since 2009.