Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Union City
Gate installation in Union City rarely looks like a standard driveway job. Most homes here are attached pre-war row houses on zero-lot-line streets, where a swing gate simply will not clear the neighbor’s wall or the narrow passage between buildings. That’s why our Gate Installation team fabricates most Union City gates as slide units or pedestrian-scale iron passage gates, sized to work in spaces as tight as 36 inches. We dispatch locally from our San Francisco Bay Area office, and a live person answers our phones around the clock. Call (626) 649-4572 to talk through what will actually fit your site.
You’ll get a written price before any work begins. Every installer wears shoe covers and lays drop cloths before stepping inside your home or passageway, and you’ll see a photo of the clean-up before we leave. That’s the Cedarwell C.A.R.E. routine on every job, no exceptions.
Why Latch & Post Gate Repair Is Union City’s Preferred Gate Installation Company
Gate Repair - Union City has been part of the Cedarwell family since 2009, and we focus on one thing: gates. The latch that holds the gate and the post that carries it are the two points where almost every gate fails, and that’s exactly the work we focus on. Union City homeowners call us because our techs know the difference between a gate that needs new hinges and one whose post has quietly rusted through at the base from Hudson salt humidity. We spot that before we ever order a panel.
Every technician is background-checked, uniformed, and factory-trained on the brands families actually own here: LiftMaster, Viking, Ghost Controls, and DoorKing among them. The team carries parts for those brands on the truck, which means fewer return trips for Union City customers and a faster answer when a passage gate off Bergenline Avenue needs attention that day.
Union City customers also get the 365-Day Done Right Promise on every installation. If the gate is not right, we make it right. No argument, no fine print. That promise covers the post footing, the panel, the operator, the keypad, and the wiring we run.
Gate Fabrication in Union City
Gate Fabrication in Union City means building a gate that fits a space a catalog gate was never designed for. On a pre-1950 row house lot, the side passage might be 36 to 42 inches wide with a brick wall on one side and a neighbor’s stucco on the other. An off-the-shelf swing panel will not fit and would not clear the wall anyway. We measure on site, build the frame and panel to your exact opening, and match the existing ironwork where the home’s original passage gate is being replaced.
Custom Passage Gates
Most Union City fabrication work is pedestrian passage gates: narrow iron gates guarding alley access, rear yard entries, or basement-level doors. We build them from steel or aluminum, hinge them to a new post if the old one has corroded, and powder-coat them to match the building. A typical custom passage gate in Union City runs $1,400 to $3,200 including the new post and hardware.
Slide Gate Conversions for Tight Lots
When a zero-lot-line side yard cannot accommodate a swing arc, we fabricate a slide gate instead. That gate rides a rack and runs on a track we set inside the property line, so it never crosses into the neighbor’s space. Slide gate fabrication in Union City typically runs $3,800 to $7,500 depending on width, operator type, and access control.
Automatic Gate Installation in Union City
Automatic Gate Installation in Union City starts with the post, not the operator. On attached row houses, the old hinge post has often spent decades absorbing salt-laden Hudson River humidity, and a new operator bolted to that post will fail early. We replace or reinforce the post first, then mount the operator, run the power, and set the travel limits so the gate opens fully without slamming. A standard automatic swing or slide operator installation in Union City runs $2,200 to $4,800, including the keypad and safety photocell.
Entrapment Protection on Tight Sites
Automatic gates in Union City need entrapment protection, full stop. On narrow Bergenline Avenue storefronts and tight residential passages, that means a safety photocell and often a loop detector so the gate reverses if a child, pet, or delivery cart crosses the path. We mount the photo eye wherever the site allows and test it before we hand you the remote.
Vehicle and Pedestrian Access During Installation
We keep the opening functional while we work. If you share a driveway or passage with another unit, we install in phases so both households keep access through the whole job. For storefront roll-downs on Bergenline Avenue, we schedule the work outside your open hours and have a temporary barrier in place the moment the old gate comes down.
Trusted Brands We Service in Union City
We work on the gate brands Union City actually has installed: Linear for apartment and condo keypad systems, Ghost Controls for residential slide and swing operators, Viking for heavier commercial slide gates, and DoorKing for access control on multi-unit buildings. We stock the common boards, remotes, and safety edges for these brands on our trucks, so a repair or replacement part often happens the same day we diagnose it. If your existing operator is a LiftMaster or FAAC, our techs are factory-trained on those too. We never push a brand swap unless your current gear cannot be made safe.
Common Gate Installation Problems We See in Union City Homes
- Corroded hinge posts on pre-1950 row houses. The gate panel often looks fine, but the post has rusted through at the base from decades of Hudson salt humidity. We replace the post footing before we install anything new, because a fresh operator on a weak post fails early.
- Swing gates that cannot clear a zero-lot-line wall. On attached buildings, there is often no room for a swing arc at all. We convert these to slide gates that stay inside the property line, or to pedestrian-scale passage gates where a swing panel will not physically fit.
- Slide gates jumping track from seasonal wall movement. Union City’s freeze-thaw cycles shift building walls in narrow north-facing passages. A slide gate installed without accounting for that movement will jump its track within a year or two. We set the track with adjustment room and anchor it to the structure, not just the pavement.
- Bergenline Avenue roll-downs cycling constantly. The storefront security gates on Bergenline see hundreds of cycles a week. The spring bottom-rail takes the abuse, slats break, and motors burn out. We install slide gates with loop detectors and photocells where the site allows, and we spec operators rated for the daily cycle count.
Pricing for Gate Installation in Union City, CA
Here is what family homes in Union City are actually paying. A custom pedestrian passage gate runs $1,400 to $3,200 installed. An automatic swing or slide operator installation runs $2,200 to $4,800 including the keypad and safety photocell. A full slide gate conversion on a zero-lot-line lot runs $3,800 to $7,500, depending on width and access control. The written price you get before we start includes the gate, post work, operator, wiring, and the cleanup photo. Nothing gets added to the invoice after the fact.
We Also Serve Cities Near Union City
Beyond Union City, we install and repair gates in Gate Installation in Union City neighboring communities including Fremont, Newark, San Lorenzo, and Castro Valley. If you’re a few minutes outside Union City, call us and we’ll tell you straight whether a trip makes sense for your project.
Serving Union City, CA - Our Local Coverage Area
We’re based in the Union City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Union City
Usually no, and we’ll tell you that before you spend a dollar. A swing gate needs its full panel width as clear swing arc, and a 36- to 42-inch passage between attached row houses rarely has that. What we do instead is fabricate a slide gate that rides inside your property line, or a pedestrian passage gate that opens inward where the space allows. Call (626) 649-4572 and we’ll walk you through what fits your specific opening.
Because Bergenline Avenue is one of the busiest pedestrian strips in New Jersey, and any automatic gate there will cross the path of people, strollers, and delivery carts hundreds of times a day. A safety photocell and often a loop detector are required so the gate reverses if someone or something is in the opening. We refuse to install an automatic gate on a Union City storefront without that protection functioning.
The post, almost always. A new operator bolted to a hinge post that has spent decades absorbing Hudson River humidity will rip loose or bind within a year. We replace or reinforce the post footing before we mount any operator, and we test the gate’s travel on the existing post before quoting the job so you know exactly what you’re paying for.
Yes. We install slide gates for Bergenline Avenue storefronts, including operators rated for the daily cycle count those gates see, loop detectors for vehicle exits, and safety photocells for pedestrian traffic. We schedule the swap outside your open hours and keep a temporary barrier up the moment the old gate comes down. Call (626) 649-4572 for a written price.
We phase the work. On shared driveways and passageways, we install in stages so both units can come and go throughout the job. For storefronts, we work outside open hours and set a temporary barrier before the old gate is removed. For residential pass-throughs, we never leave the opening unguarded overnight. The gate is either functional or secured at the end of every workday.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family of independently owned and operated gate specialists, serving Union City since 2009.