Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Temple City
A new driveway gate in Temple City typically runs $2,400-$7,800 installed, depending on the gate style, operator, and whether we’re working with an existing opening or building new posts. We’re in Temple City every week, and most standard installations are scheduled within 5-10 business days, with the written price in your hand before we order a single part. Slide gates, swing gates, double gates, pedestrian gates, and security gates all start with the same step: a free measure of your driveway or walkway so the quote reflects the actual site, not a guess. Call (626) 649-4572 and a live person answers, day or night.
This is Latch & Post Gate Repair, part of the Cedarwell family of gate specialists. We focus on gates the way a good mechanic focuses on one make of car. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on.
Why Latch & Post Gate Repair Is Temple City’s Preferred Gate Installation Company
Temple City gates are different from what you’ll find ten minutes away in Pasadena or Arcadia. The housing stock here is heavily 1940s-1960s ranch homes on compact lots, and many of those homes got ornamental iron driveway gates in the 2000s and 2010s, long after the original driveway was poured. That combination of mid-century driveway widths and retrofitted gates creates specific problems: tight clearances, stressed hinges, and operators working harder than they were designed to. Our crews see these patterns every week on streets like Longden Avenue, Sultana Avenue, and Cloverly Avenue, so we quote them accurately the first time.
Cody Beckman, who leads our Temple City work, has spent years matching replacement hardware to the non-standard hinge and post dimensions that are common on gates fabricated by local iron shops here. That means we do the custom fabrication before the quote is finalized, not after we’ve started the job and discovered the mismatch.
Homeowners in Temple City appreciate the routine we bring to every visit. Shoe covers and drop cloths go down before we step inside to check an internal keypad or control board. We photograph the cleanup before we leave. And we’re happy to schedule around nap time if you have young kids, using quiet tools when we’re working near the house.
Sliding Gate Installation in Temple City
Sliding gate installation in Temple City is often the right choice for homeowners whose driveway openings are too narrow for a swing gate to clear properly, which is common on the 10-12 foot driveways of mid-century ranch homes here. A slide gate moves along a track or cantilever system instead of arcing into the driveway, so it preserves what little side clearance exists. On compact Temple City lots where the driveway sits tight against the house or a block wall, eliminating the swing path makes the difference between a gate that works for years and one that scrapes the ground every time it cycles.
Typical sliding gate installation in Temple City runs $3,200-$7,800, with the final number set by gate material, overall length, and whether you want an automated opener. You’ll see the exact figure in writing before we start.
Heavy-Duty Slide Gates for Narrow Driveways
Many Temple City driveways were poured at 10-12 feet wide, which is tight for a swing gate but workable for a slide gate with the right hardware. We pour a new post footing set wider than the original posts when needed, then use a rack and pinion system that holds the gate steady through hundreds of cycles. The key is getting the posts set so the gate clears the ground by at least 2 inches on the low side, even after the soil settles.
Solar Slide Gate Systems for Long Runs
Some Temple City properties, especially on the eastern edge of the city toward the San Gabriel River channel, have long side yards or gated rear entries where running mains power is costly. A solar slide gate operator eliminates that trenching, provided the panel is sized for San Gabriel Valley heat. We mount panels directly on the gate frame when the site allows, keeping the operator clear of the swing and the panel angled for maximum afternoon sun.
Gate Opener Installation in Temple City
Gate opener installation in Temple City means matching an operator to the weight of your existing gate and the way your driveway is built, not just bolting on whatever the big-box store had in stock. Most single-family automation jobs here run $1,100-$2,900 including the operator, arms or rack, safety edges, and programming. New operator installation on an existing gate is one of our most common Temple City jobs, driven by the wave of gates installed in the 2000s and 2010s that are now hitting the 10-20-year failure window on their original openers.
Solar Operator Sizing for San Gabriel Valley Heat
Photocell and panel sizing matters here more than almost anywhere else in Southern California. Temple City regularly sees summer highs above 100°F, and heat reduces battery capacity while increasing the gate’s rolling resistance as metal expands. We size solar panels and batteries for those peak weeks, not for a mild coastal climate, so your gate doesn’t stall at 3 p.m. on the hottest day of August.
Operator Retrofit on Older Ornamental Iron Gates
When we’re asked to automate a 2000s-era ornamental iron gate in Temple City, we check the post condition, hinge alignment, and gate weight before recommending an operator. Many of those gates were never engineered with an opener in mind, which is why so many retrofits on these homes overload the motor and wear out the limit switches early. Sometimes the right answer is reinforcing the post or rebalancing the gate first. We’ll tell you that before we sell you a motor.
Trusted Brands We Service in Temple City
We install and service operators from Viking, Ghost Controls, DoorKing, and Elite, plus a number of other factory-trained brands. Because we know which models are already installed across Temple City, we keep common parts and boards for these brands on the truck, which often lets us finish a repair or opener retrofit in a single visit rather than ordering and returning. Viking’s solar-capable operators come up constantly in Temple City, as do Ghost Controls kits on lighter pedestrian gates. If you have an existing opener, we’ll match the new hardware to it so you aren’t paying for controls you don’t need.
Common Gate Installation Problems We See in Temple City Homes
- Undersized driveway openings. The 10-12 foot driveway standard on Temple City’s 1940s-1960s ranch homes leaves little room for a swing gate. We regularly pour new post footings and switch homeowners to slide gates or dual swing gates with unequal leaf widths to prevent chronic hinge stress and ground scraping.
- Non-standard hardware from 2000s ironwork. Many gates in Temple City were fabricated by local iron shops using hinge and post dimensions that don’t match any current catalog part. Replacement hardware often needs custom fabrication, and a tech who doesn’t know this quotes the job wrong before it starts. We build the fabrication into the quote.
- Solar panels undersized for Valley heat. A solar operator that works fine in coastal air struggles when summer temps push past 100°F and batteries sit hot all afternoon. We see Temple City gates stalling or reversing mid-cycle because the panel and battery bank were sized for a cooler climate. Proper sizing changes the failure pattern entirely.
- Operators straining against heavy ornamental iron. Powder-coated ornamental gates look light but carry real weight, especially double gates with layered scrollwork. An undersized motor on a wide double gate burns through limit switches and circuit boards. We weigh the gate before specifying the operator, every time.
Pricing for Gate Installation in Temple City, CA
We Also Serve Cities Near Temple City
In addition to our full Gate Installation services across Temple City, we regularly work in El Monte, San Gabriel, Arcadia, and Rosemead. We’ll happily come out to surrounding areas for the same free measure, written price, and cleanup routine. If you’re just outside Temple City, check the full service details here, which apply to every city we serve.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Temple City
Can I install a heavy-duty slide gate on a 10-foot-wide driveway in Temple City?
Yes, and we do it regularly. The key is setting the posts wide enough for the gate to fully retract without crowding the driveway, and using a rack and pinion system rated for the gate’s weight. A 10-foot opening typically fits a 12-foot gate leaf, but we’ll measure before recommending anything. Call (626) 649-4572 if you want us to look at your opening.
Do I need a solar gate opener in Temple City if my driveway is long?
You may not strictly need one, but on long runs where trenching for mains power would mean cutting through concrete or landscaping, solar is often the sensible choice. The catch in Temple City is heat: the panel and battery must be sized for summer highs above 100°F or the operator will stall on hot afternoons. We size solar systems for local conditions, not manufacturer’s mild-weather specs.
Why does my gate keep sagging even after I replace the hinges?
The problem is usually the post, not the hinge. In Temple City, many gates were built in the 2000s using non-standardized post dimensions that don’t provide enough structural depth for the gate’s weight. Replacing the hinges without addressing the post simply shifts the stress to the new hardware. We check the post first, and if it needs reinforcing or replacing, we’ll tell you before recommending new hinges.
Are safety photocells required on automatic gates in Temple City?
Yes. California follows UL 325 standards, which require entrapment protection on automatic gates, including monitored photocells and safety edges or a non-contact sensor. We install compliant photocell sets and test the reversal system on every automated gate we put in. This is not optional equipment and we won’t install an operator without functioning entrapment protection.
How do I know if my gate needs a loop detector or keypad entry?
A vehicle loop detector embedded in the driveway senses a car and holds the gate open, which is useful if you exit and enter frequently and don’t want to press a remote every time. A keypad entry works better for family members who arrive on foot or in different cars. Temple City homes with a single narrow driveway often benefit from both. We’ll walk you through the options at the measure and give you exact pricing for each.
Call Latch & Post Gate Repair for Gate Installation in Temple City
We’ll measure, check the posts and opening, write a clear price, and answer on the first call. No voicemail tree. No surprise invoice. No muddy floors. Call (626) 649-4572 any time to schedule your free estimate. We answer live, 24/7.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Temple City since 2009.