Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Sunnyvale
Gate installation in Sunnyvale runs $2,800 to $9,500 for most residential jobs, with automated driveway gates on ranch-style homes typically landing between $4,200 and $6,800. We install pedestrian gates, swing gates, sliding gates, and double gates across Sunnyvale neighborhoods like Cherry Chase, Birdland, and Ponderosa Park. Our Gate Installation team handles the footing, the frame, the operator, and the access wiring so you don’t have to coordinate three different crews. Call (626) 649-4572 and we’ll give you a written price before anything gets ordered or dug.
Why Latch & Post Gate Repair Is Sunnyvale’s Preferred Gate Installation Company
Most of our Sunnyvale work comes from neighbors referring neighbors, and from property managers who’ve had too many gate crews leave a mess behind. We’re part of the Cedarwell family and have been doing this since 2009. Every technician is background-checked and uniformed, and every visit includes shoe covers, drop cloths, and a photo of the clean-up before we leave. Our owner, Cody Beckman, holds the team to the C.A.R.E. values: clean up like it’s our own home, ask before we move anything, respect your time and quiet hours, and explain the price before the work.
Sunnyvale homeowners tell us the same thing over and over: they want a straight number, a gate that works, and floors that don’t need mopping after we’re gone. That’s exactly what we deliver. A live person answers our phone 24 hours a day, every day, so you’re never leaving a voicemail at 9 p.m. wondering if anyone will call back. The 365-Day Done Right Promise covers every installation: if it isn’t right, we make it right. No argument, no fine print.
Gate Opener Installation in Sunnyvale
Gate Opener Installation in Sunnyvale means sizing the operator to the gate’s weight and duty cycle, then wiring it correctly for our damp winter mornings and dry summer heat. A typical residential opener install on a single swing gate runs $1,800 to $3,400 including the operator, safety edges, and programming. Commercial slide gate openers on Kifer Road or Caribbean Drive run higher, usually $4,500 to $8,000, because they need loop detectors, keycard or RFID integration, and a heavier frame. We train our technicians on Viking, Ghost Controls, DoorKing, and Elite equipment so the operator we install is one we already know how to program and repair.
Residential opener work
On a 1950s ranch home in Cherry Chase or Serra, the job usually involves a new post footing cut into existing concrete, a swing arm or slide track, and a weatherproof junction box. We run conduit along the fence line rather than burying line-level wire, because Sunnyvale’s winter rain will find any shortcut. The operator gets programmed for your gate’s full travel, and safety edges get tested with the obstruction test before we leave.
Commercial access integration
At tech campuses and R&D facilities, opener installation is an electronics job as much as a mechanical one. We wire loop detectors into the approach lane, connect the operator to the building’s access control panel, and program credentials so employees badge through without getting out of the car. When a previous tenant’s system is orphaned, we often have to start from scratch: new antenna, new controller settings, and a full re-enrollment of the keycard database.
Gate Fabrication in Sunnyvale
Gate Fabrication in Sunnyvale means building the gate from raw steel, aluminum, or wood to match what’s already on your property, or to replace a gate that’s failed beyond repair. Fabricated aluminum pedestrian gates run $1,200 to $2,800 in Sunnyvale; a steel double driveway gate runs $4,500 to $9,000 depending on height, ornamentation, and whether it’s galvanized before powder coating. We measure on-site, build off-site, then return for the install normally within three to four weeks. Every gate comes with the 365-Day Done Right Promise, the same as a repair.
Steel and aluminum fabrication
For Sunnyvale’s coastal air, we recommend galvanized steel or 6063 aluminum. Mild steel looks fine the first year, then the welds start pitting from marine-layer moisture and winter rain. Aluminum costs more up front but doesn’t need the same rust maintenance, which matters when the gate is on the west side of the property catching afternoon wind off the bay.
Wood gates done right
Wood gates are still common on Sunnyvale’s ranch lots, but they need proper joinery and sealed end grain to survive our wet-dry cycle. We use stainless hinges and through-bolts at stress points, and we seal every cut before assembly. A fabricated cedar gate with steel frame reinforcement runs $2,500 to $5,000 in Sunnyvale, and it’ll outlast a stock pine gate by a decade.
Trusted Brands We Service in Sunnyvale
We’re factory-trained on the gate equipment Sunnyvale families and facilities actually use: LiftMaster for residential swing and slide operators, FAAC and BFT for commercial-grade systems, Linear and Viking for R&D campus gates, Ghost Controls for solar and rural applications, and DoorKing and Elite for access control integration. Because our dispatch is coordinated from the San Francisco Bay Area office and our crews keep common Sunnyvale parts on the truck, we can often finish most installations in one or two visits. We don’t quote a brand we haven’t been trained on, period.
Common Gate Installation Problems We See in Sunnyvale Homes
- Mild-steel rollers corroding in the marine layer. Slide gates on the west side of Sunnyvale, from Ponderosa Park up to Baylands-facing streets, show rust on rollers and tracks within two years. Stainless rollers and a galvanized track cure it.
- Old post footings failing under automated gates. Ranch homes built in the 1950s and 1960s often have wood posts set in concrete without proper depth or drainage. When we add an opener, the post starts moving, so we pour a new footing with rebar and a galvanized post bracket.
- Orphaned commercial operators from tenant turnover. Along Kifer Road and Caribbean Drive, tenants churn constantly. A gate operator left behind is often still wired to a defunct access control panel, so the new tenant’s keycard won’t work until the whole system is reprogrammed or replaced.
- Wood panels swelling and delaminating. Sunnyvale gets 15 to 20 inches of rain concentrated in winter, then months of dry UV. Panels swell at the hinge, sag, and surface-check by June. We build with sealed end grain, stainless hardware, and steel reinforcement where the panels take wind load.
Pricing for Gate Installation in Sunnyvale, CA
A pedestrian gate install in Sunnyvale runs $1,500 to $3,500. A standard automated swing driveway gate runs $4,500 to $6,800. A commercial slide gate with access control integration runs $6,500 to $12,000 by the time footings, operator, loops, and programming are done. What changes the number: gate width, post condition, whether we’re cutting footings through existing concrete, and how much electronics the job needs. Every quote is written, itemized, and handed to you before any work starts. You sign only if you like the number. Call (626) 649-4572 to schedule a free measure and written estimate.
We Also Serve Cities Near Sunnyvale
We work across the South Bay and mid-Peninsula. If you’re in Mountain View, Santa Clara, Cupertino, or Los Altos, our Gate Installation in Sunnyvale crews coordinate from the same Bay Area office and cover your job under the same 365-Day Done Right Promise. Same written-price rule, same shoe covers and drop cloths.
Serving Sunnyvale, CA - Our Local Coverage Area
We’re based in the Sunnyvale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Sunnyvale
The marine layer keeps morning humidity high from May through August, and combined with winter rain it accelerates corrosion on mild-steel gate hardware. We specify galvanized frames, stainless rollers and hinges, and powder-coated aluminum where possible for Sunnyvale installs. Painted mild steel is cheaper up front but will pit at the welds within a few years. Call (626) 649-4572 and we’ll walk you through the material trade-offs before you commit.
Tech tenants along Kifer Road, Caribbean Drive, and Mathilda Avenue move in and out constantly. Each move leaves behind an operator that’s still linked to a departed tenant’s keycard or RFID system. We regularly arrive to find mismatched credentials and orphaned programming, so the fix is a full re-enrollment, not a simple service call. We handle the electronics, the loop detectors, and the operator integration in one visit whenever possible.
Yes, it’s one of our most common Sunnyvale jobs. These homes sit on flat lots with driveway approaches built for a car width and a half, so we often install a single swing gate with a swing-arm opener. The trick is the footing: we cut out a section of the existing driveway or walkway, pour a new concrete footing below the root line, and set a galvanized steel post bracket. That’s the detail that keeps the gate from sagging into the driveway two years later.
Hinge hardware is the biggest one, followed closely by mild-steel rollers on slide gates. West-facing properties catch the marine-layer moisture, and the zinc-plated hinges that come standard on many gates give out in three to five years. We replace them with stainless and upgrade the mounting plates at the same time, so the fix lasts. Call (626) 649-4572 for a free inspection.
We do. For back lane gates in Birdland or detached garages with no nearby circuit, a solar kit on a Ghost Controls or Viking operator works well in Sunnyvale’s climate, which gets enough sun even through the marine layer. We size the panel and battery to the gate’s duty cycle so the opener doesn’t go dead in the winter. Estimates are free and come in writing before anything gets installed.
Call Latch & Post Gate Repair for Gate Installation in Sunnyvale
If you live in Sunnyvale and need a new gate, an automated opener, or a full replacement with new footings, call (626) 649-4572. A live person answers, day or night. We’ll schedule a free measure, walk the job with you, hand over a written price, and install the gate with shoe covers on, drop cloths down, and a clean-up photo before we leave. That’s our C.A.R.E. routine on every single visit. The 365-Day Done Right Promise stands behind every gate we install in Sunnyvale, from the panels to the programming.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, coordinating gate installation in Sunnyvale through the Bay Area office since 2009.