Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Coconut Creek, FL
Coconut Creek gate work is different from anywhere else in Broward County because of one overwhelming reality: the city is defined by massive 55+ active adult communities, most notably Wynmoor Village with its 4,000-plus units and Century Village. These are not single-family driveway gates. They’re high-cycle, commercial-grade entry and exit systems that process hundreds of vehicles an hour during morning rush. When something fails, the whole community feels it. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on exactly one thing: the latch that holds the gate and the post that carries it. If you need a gate looked at in Coconut Creek, call (626) 649-4572 and a live person will answer.
Why Coconut Creek Homes Are Different
Most of Coconut Creek’s housing stock was built between the late 1960s and the 1980s, and a lot of those communities still run on their original electromechanical gate operators and intercom wiring. That equipment is now 30 to 50 years old, and parts are getting harder to source. We see it constantly at communities like Wynmoor and Century Village: the operator works, but the internal relays are fried, or the intercom board won’t hold a call. The job isn’t a simple swap. It’s diagnosis first, then a repair that respects the fact that a three-hour gate outage can back up hundreds of residents at the morning exit.
The climate compounds everything. Coconut Creek sits inland, so the humidity hangs around all summer, and the daily afternoon thunderstorms keep gate hardware damp for months at a time. Hinges corrode, control boards short, and motors burn out faster than they would closer to the coast. Then there’s the soil. Western Broward’s sandy-marl ground softens badly after heavy storm saturation, and gate posts set in it can lean or shift, throwing automatic gates out of alignment. After a hurricane, we’re out realigning posts and replacing storm-damaged operators. It’s routine here in a way it isn’t in smaller single-family subdivisions.
Our Main Coconut Creek Services
Three services cover nearly every gate call we get in Coconut Creek. Each has its own page here on the site, where you’ll find the pricing, the local conditions that matter, and what to expect from the first phone call to the final cleanup photo.
Gate Repair in Coconut Creek
When a gate won’t close, sags on its hinges, or the latch won’t catch, you want a technician who knows what the humidity and daily storm cycles do to hardware in this city. Most repairs in Coconut Creek are hinge and bracket failures on swing gates, or latch and lock issues on pedestrian gates that see constant use in communities like Wynmoor. We bring the common parts for FAAC and Linear operators, plus a full hinge and latch kit, so one visit usually finishes the job. Every repair gets a written price before we touch anything. Full details are on the Gate Repair in Coconut Creek page.

Gate Installation in Coconut Creek
A new gate in Coconut Creek usually means one of two situations: a single-family home in the newer subdivisions along Wiles Road or Sample Road, or a community entry gate that needs full replacement after years of storm cycles. The soil matters here more than most homeowners expect. Posts set in soft, sandy-marl ground need deeper footings and careful compaction so the gate doesn’t lean after the first heavy summer. We quote the full job in writing, including the operator, the safety edges, and the power run, before any work is scheduled. See the specifics on the Gate Installation in Coconut Creek page.

Electric Gate Repair in Coconut Creek
Electric gate problems in Coconut Creek are usually one of three things: a control board corroded by humidity, a motor worn out by thousands of open-close cycles a week, or a safety sensor knocked out of alignment after a storm. At high-traffic communities like Century Village, a failed operator isn’t a convenience problem, it’s a traffic problem. We carry boards and parts for BFT and Viking systems on the truck, and we know how to work with HOA management boards and their vendor requirements. The full breakdown is on the Electric Gate Repair in Coconut Creek page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Coconut Creek
Our technicians are factory-trained on the brands Coconut Creek communities actually run: FAAC, BFT, Linear, and Viking. We stock common boards, receivers, and safety sensors for these brands in our South Florida service vehicles, so most repairs finish on the first visit. Browse our brands page for the full lineup.
Pricing for Gate Company in Coconut Creek, FL
These are the ranges we see most often in Coconut Creek. Your written quote will reflect the exact gate, operator, and condition before any work begins.
| Service | Typical range in Coconut Creek |
|---|---|
| Gate latch replacement | $120 - $260 |
| Gate hinge replacement (pair) | $180 - $340 |
| Gate post realignment | $220 - $400 |
| Control board replacement | $350 - $650 |
| Operator motor replacement | $450 - $850 |
| Safety sensor replacement | $150 - $300 |
| Intercom system repair | $180 - $380 |
| Full gate installation (single swing) | $1,800 - $3,400 |
| Full gate installation (slide) | $2,800 - $5,200 |
| Electric gate opener installation | $1,200 - $2,400 |
What pushes a Coconut Creek job toward the top of these ranges is usually age and environment: 40-year-old posts that need re-setting, control boards corroded by constant humidity, or HOA requirements that call for specific commercial-grade hardware. What never changes is this: you’ll see the exact number in writing before we start, and that number doesn’t move unless you approve a change.
Neighborhoods We Serve in Coconut Creek
We work across all of Coconut Creek. Most calls come from the large active adult communities and the single-family subdivisions around them, and we typically reach any address in the city within an hour during regular business hours.
- Wynmoor Village
- Century Village
- Wiles Road corridor
- Sample Road corridor
- Carolina Club
Service Area – Cities Near Coconut Creek
While this page covers Coconut Creek, our techs also work the surrounding Broward communities. We regularly serve gates in Margate, FL, Pompano Beach, FL, Coral Springs, FL, and Deerfield Beach, FL. Same familiar face, same written-price promise, same cleanup photo before we leave.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Coconut Creek
We usually reach any address in Coconut Creek within an hour during regular business hours, and our live person answers the phone around the clock. If an HOA entry gate is down at Wynmoor or Century Village and backing up traffic, we prioritize that call the moment it comes in. Call (626) 649-4572.
Daily. Most of our Coconut Creek work comes through HOA boards and property managers who need a vendor that carries insurance documentation, follows community rules, and can get board authorization to proceed during an emergency. We’re comfortable with that process and move fast on it.
Yes. Many of our Coconut Creek customers have grandchildren visiting, or they live in buildings with strict quiet hours. We can schedule a specific window and our technicians use quiet tools where possible. Just mention it when you call, and we’ll plan around it.
If you’ve got a gate that needs help in Coconut Creek, call (626) 649-4572. You’ll get a real person, a straight answer, and a free written estimate before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coconut Creek Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide





Before
After
Before
After
Before
After