Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Shoreline
Gate installation in Shoreline usually means one of two jobs: a fresh gate on a new fence line, or replacing a gate that has spent decades fighting our rain, fir roots, and windstorms. Most standard driveway gate installations in Shoreline run $1,800 to $4,600, and a wide farm or acreage gate with a solar opener typically lands between $4,200 and $9,800 depending on span, weight, and whether the old post footings can be reused. You’ll see the exact written price before we touch anything. If you’re planning a gate on a long driveway off the Aurora corridor or out near NE 185th St, call (626) 649-4572 and we’ll walk the site with you and put a number in writing.
Why Latch & Post Gate Repair Is Shoreline’s Preferred Gate Installation Company
We focus on gates. Not fences, not decks, not gutters. Every gate comes down to two parts, the latch that holds it and the post that carries it, and that’s the job we focus on. Our Gate Installation team has worked on Shoreline properties from Richmond Beach Road up to the Snohomish County line, and we know what happens to a gate post when a mature Douglas fir root decides to grow through the footing. Cody Beckman leads our crews, and every technician arrives background-checked and in uniform, with shoe covers and drop cloths so the work doesn’t follow us into your house.
Shoreline homeowners tell us the same thing: they want the gate to open properly for years, and they want the crew to leave the driveway cleaner than they found it. Both are covered. The Cedarwell Care Promise applies to every visit, written price first, shoe covers and drop cloths on every entry, and a cleanup photo before we leave. If the installation isn’t right, the 365-Day Done Right Promise means we make it right. No argument, no fine print. That’s the kind of reputation we’ve built since 2009, across independently owned and operated Cedarwell locations.
Gate Fabrication in Shoreline
Gate Fabrication in Shoreline matters more here than in newer suburbs, because so many of our lots were built out in the 1950s through 1970s with dimensions that don’t match what’s in a catalog today. A 14-foot opening, a slight slope, a post that’s still standing but no longer plumb. Off-the-shelf panels rarely fit those conditions, so we fabricate to the actual measured opening, then build the gate to carry the weight of a wide panel without sagging at the hinge post. A custom fabricated steel or aluminum gate in Shoreline typically runs $2,400 to $6,800, including the frame, pickets or infill, hinges, latch, and installation. You’ll see the exact figure in writing before any work starts.
Farm and Acreage Gate Frames
Wide farm gates are the hardest working hardware on a rural Shoreline property. A 16-foot farm-rated swing gate needs a frame built from heavier tube steel than a standard driveway gate, with mid-rails and a diagonal brace running the right direction. We build the panel around the operator, not the other way around, so the opener never strains against a gate that’s too heavy for its own hinges.
Pedestrian Gates and Matching Driveway Panels
When a driveway gate goes in, the walk gate next to it needs to match in height, style, and opening direction. We fabricate both from the same material run so the finish matches, and we set the pedestrian gate on its own post so it doesn’t drag on the driveway gate’s hinge post.
Automatic Gate Installation in Shoreline
Automatic Gate Installation in Shoreline starts with one question nobody in a catalog can answer: can we get power to the gate? On a long rural driveway where the gate is 300 feet from the house panel, trenching 120V mains is expensive and sometimes impossible. In those cases, a solar gate opener with a properly sized battery bank is the right answer, and it’s what we install most often on acreage entrances around Shoreline. A complete automatic gate installation, operator, safety photocells, and two remotes usually lands between $3,200 and $7,500 depending on gate weight, span, and whether we’re powering it from mains or solar. The written price covers everything, and you agree to it before we order a single part.
Solar Openers for Long Driveways
The biggest mistake we see on Shoreline acreage gates is an undersized solar panel feeding an undercharged battery. That works in July and dies in November, right when the driveway is darkest and wettest. We size the panel and battery for the November through February stretch, not for a July afternoon, and we choose operators from brands like FAAC, BFT, and Ghost Controls that are built for continuous cycle work on wide gates.
Slide Gate Operators for Sloped or Snow-Shedding Driveways
If the driveway slopes uphill toward the gate or you need a gate that moves sideways rather than swinging out over the drive, a sliding gate operator is often the better choice. Shoreline’s marine clay soil shifts with the rain, and a slide gate on a single track with a proper roller system handles that movement better than a swing gate on posts that want to lean. We install slide operators for gates up to 1,000 pounds, with safety edges and photocells wired to entrapment-protection standards.
Trusted Brands We Service in Shoreline
We factory-train on the brands Shoreline families actually have, and we stock parts locally for the ones we install most. That means a FAAC hydraulic operator, a BFT slide motor, a Linear control board, or a Ghost Controls solar kit doesn’t turn into a two-week wait while a part ships from somewhere else. We service what we install, and we keep the manuals, dip switches, and remote programming for every brand on our van so a follow-up visit takes minutes instead of a second service call. If you already have a Viking or a different brand you prefer, we’ll match the new installation to work with it.
Common Gate Installation Problems We See in Shoreline Homes
- Mains power can’t reach a gate on a long driveway. This is the most common issue we solve on Shoreline’s acreage and rural-edge properties. Trenching 120V from the house to a gate 300 feet away can cost more than the gate itself, and the trench cuts through roots and gardens to get there. A properly sized solar opener solves it for a fraction of that cost, no trenching required.
- Fir and cedar roots heave and tilt original 1950s post footings. In Shoreline’s older eastside neighborhoods, a wide farm swing gate will sag at the hinge post even when the panel is sound. The post is moving, not the gate. We demo the cracked footing, cut the root back, pour a deeper footing below the root line, and set the post plumb before hanging the new panel.
- Storm-season limb strikes and eight months of marine rain seize steel hardware. Every November through February, Shoreline’s windstorms drop Douglas fir limbs onto gate frames. We see caved-in top rails, sheared hinge pins, and latches rusted open by standing rain. The right repair is a new frame matched to the existing post or a full replacement if the post took the impact.
- Pre-1995 gates trigger first-ever code review under Shoreline Municipal Code Title 20. Shoreline was unincorporated King County until 1995, and many gates on acreage lots date from before the city’s municipal code existed. A new automated gate installation on those properties can require a first-ever compliance review, and we’ll tell you what the city will ask for before you order anything.
Pricing for Gate Installation in Shoreline, WA
A standard single swing driveway gate in Shoreline, fabricated and installed, runs $1,800 to $4,600. Add an automatic operator, safety photocells, and two remotes, and the job lands between $3,200 and $7,500. A wide farm or acreage gate with a solar opener, the setup we install most often on long driveways off the Aurora corridor and out near NE 185th St, typically runs $4,200 to $9,800. The variables are span, panel weight, whether we can reuse the existing posts or need to pour new footings, and whether power comes from mains or solar. Your exact price is written down and agreed before we start. Call (626) 649-4572 for a free estimate, and we’ll give you the number on paper the same day we look at the site.
We Also Serve Cities Near Shoreline
Latch & Post Gate Repair serves Shoreline and the surrounding area, including Seattle, Tacoma, Spokane, and Vancouver. If your property is on the edge of town or just over a city line, we’ll still come out, and the same written price and 365-Day Done Right Promise apply.
Serving Shoreline, WA - Our Local Coverage Area
We’re based in the Shoreline area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Shoreline
Yes. Most of the automatic gates we install on Shoreline’s acreage lots run on solar, because trenching mains to a gate 200 or 300 feet from the house is impractical. We size the solar panel and battery bank for the November through February stretch, so the gate keeps cycling through our darkest, wettest months. Call (626) 649-4572 and we’ll assess the site and give you a written solar option with specific panel and battery specs.
In Shoreline, the usual reason is a post footing that’s been heaved and tilted by a Douglas fir or Western red cedar root. The post moves, so the gate sags no matter how many times you adjust the hinges. The fix is demolition of the old footing, root management, a new deeper pour, and a plumb post before rehanging the gate. Call us for a free estimate and we’ll show you exactly where the footing failed.
Yes. Any new automatic gate installation in Shoreline requires entrapment protection, which means safety photocells across the drive and a reversing edge or obstruction sensor on the gate itself. Shoreline is still working through how its Municipal Code Title 20 interacts with current gate standards, but entrapment protection is non-negotiable on any automated gate. We include it in every installation and we’ll show you the test report before we leave.
It can. Shoreline was unincorporated King County until 1995, so any gate installed before that predates Shoreline Municipal Code Title 20. A new automated gate installation on that property can trigger a first-ever compliance and permit review, particularly on acreage lots and properties near the Lynnwood Link upzone areas around NE 145th St and NE 185th St. We’ll flag what the city will likely ask for before you spend a dollar on hardware. Call (626) 649-4572 and we’ll walk you through it.
A farm-rated swing gate built from heavy tube steel with a solar opener sized for winter is the setup we recommend most often for Shoreline acreage entrances. A slide gate works better where the driveway slopes or you need to keep the swing arc clear. We’ll look at the span, the soil, and the tree cover, then recommend the style and operator that won’t fight the site. Estimates are free, and the price is in writing before we start.
Call Latch & Post Gate Repair for Gate Installation in Shoreline
If you’re planning a new gate in Shoreline, our team is ready to measure, build, and install it. We answer the phone live, 24 hours a day, and we’ll get a written estimate to you fast. Call (626) 649-4572 and ask for Cody Beckman or any of our Shoreline crew leads. You’ll get a straight answer on price, a gate that opens properly in the rain, and a cleanup photo before we leave.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Shoreline since our founding in 2009.