Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across San Leandro
Gate installation in San Leandro runs $1,800 to $6,400 for most residential driveway gates, with automatic operator systems adding $1,200 to $2,800 depending on the equipment. We build around the specific conditions San Leandro throws at gates: bay-front salt air, mid-century tract homes with tired hardware, and the heavy commercial slide gates along the I-880 corridor. When a gate sags or an opener dies, you need a straight answer about repair versus replacement, not a vague estimate. Call (626) 649-4572 and a live person will talk you through what you’re seeing.
Why Latch & Post Gate Repair Is San Leandro’s Preferred Gate Installation Company
We’ve been part of the Cedarwell family since 2009, and our Gate Installation crews know the difference between a Marina district gate eating salt air and a Bancroft Avenue gate just dealing with old age. Latch & Post Gate Repair is not a general handyman service. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, whether it’s a pedestrian gate off Estudillo Avenue or a double driveway gate near the San Leandro Marina.
What San Leandro homeowners tell us they value most is the routine we don’t skip. A written price before any work begins. Shoe covers and drop cloths on every visit. A photo of the clean-up before our technician leaves. Those are Cedarwell C.A.R.E. values: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. Cody Beckman runs our team, and the standard he set is simple: no argument, no fine print, and a 365-Day Done Right Promise on every installation.
We answer every call with a live person, 24 hours a day, weekends and holidays included. No voicemail queue. When a gate fails at 7 a.m. and you need to get a car out, you’ll talk to a person who can dispatch a background-checked, uniformed technician to San Leandro.
Gate Fabrication in San Leandro
Gate Fabrication in San Leandro means building the gate itself, usually from steel or aluminum, to fit an exact opening and match the house behind it. This is not an off-the-shelf panel. When a 1950s flatlands home loses its original wrought-iron driveway gate to rot at the hinge post, the panel itself often survives. But when the panel is past saving, or when a new construction needs a gate that doesn’t exist in a catalog, we fabricate it. A typical fabricated steel driveway gate in San Leandro runs $2,400 to $6,400, and you’ll see the exact number in writing before anything is cut.
Marine-Layer Hardware Selection
San Leandro’s bay-front exposure, especially around the Marina district and the industrial strip west of I-880, pushes salt-laden air into metal constantly. Zinc-plated hinges and latches last a fraction of the time they would in the eastern hills. For any gate in the lower flatlands zip codes, we baseline stainless-steel or hot-dipped galvanized components. That is the practical choice here, not an upsell.
Post-First Fabrication
A gate is only as good as the post carrying it. On the 1945 to 1965 tract homes, the original posts are usually wood and usually well past their service life. Marine-layer damp keeps those posts moist long enough to rot, and a gate that sags on a rotten post will sag again no matter how well the panel is built. When we fabricate, we plan the post first, set it in new concrete, and hang the gate from hardware that matches the site conditions.
Automatic Gate Installation in San Leandro
Automatic Gate Installation in San Leandro pairs a fabricated or existing gate with an operator, safety photocells, and the wiring or wireless controls to make it work without leaving the car. A LiftMaster or FAAC operator on a single swing gate typically runs $1,200 to $2,800 installed, and the operator is quoted separately from the gate itself so you know exactly what each part costs. This is measured, scheduled work. We come out, take measurements, write a fixed price, and schedule the install. There is no same day promise on an automatic system that needs to be done right.
Retrofitting a Legacy Operator
A lot of San Leandro homes still run operators from the 1990s and early 2000s. The control boards on those units are often discontinued. On a residential swing gate that failed because of a dead board, we will tell you honestly whether a board replacement makes sense or whether a new operator is the cheaper long-term answer. We don’t sell a new unit just because the old one is old. We sell it when repair would cost more than replacement and still leave you with 25-year-old hardware.
Safety Edges and Photocells Included
Every automatic gate we install in San Leandro gets safety photocells as a standard part of the job, not an added line item. On a driveway gate where a child or pet might be nearby, the photocells stop the gate from closing on them. We will also talk through whether a safety edge makes sense for your site. These are not optional. They’re part of a gate that works the way it should.
Trusted Brands We Service in San Leandro
Our technicians are factory-trained on the brands families in San Leandro actually have on their gates. That means LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts and operators for those brands locally, which means a repair or install on a Linear operator off Davis Street doesn’t wait on a shipping delay. FAAC and Viking hydraulic operators on commercial slide gates along the I-880 corridor are a regular part of our week, and we know the failure modes they develop in a marine-layer environment. When you call about an operator that won’t hold a code or a gate that reversed and stayed open, bring us the brand name. We’ll know what you’re describing.
Common Gate Installation Problems We See in San Leandro Homes
- Hinge post rot on 1945-1965 tract-home gates. The flatlands stock of mid-century homes still carries a lot of original wrought-iron and chain-link driveway gates, and the panel is rarely the problem. The hinge post rots from marine-layer damp and the whole gate drops. Replacing the panel without correcting the post and footing means the same sag returns within a year or two.
- Corroded zinc-plated hardware west of I-880. Properties near the Marina and the bayside industrial strip see standard gate hinges, latches, and operator brackets fail to corrosion faster than anywhere else in San Leandro. A gate installed with big-box zinc hardware is back in for hinge and latch service long before an equivalent gate with stainless or galvanized components.
- Obsolete control boards on legacy automatic operators. The 1990s-era operators still running on residential swing gates often have discontinued control boards. When the board dies, we’ll confirm whether a replacement board exists at a reasonable cost. Often it doesn’t, and a new operator is the honest answer. We’ll show you the math before we recommend anything.
- Commercial rolling steel gate wear along Davis Street and I-880. San Leandro’s industrial corridor handles a heavy volume of logistics yards, food-processing compounds, and light manufacturing. Those rolling steel and slide gates cycle constantly, and high-cycle operators wear out on a schedule, not by accident. If your facility gate runs dozens of cycles a day, we’ll spec equipment built for that duty rather than a residential operator that will burn out early.
Pricing for Gate Installation in San Leandro, CA
A typical single driveway gate in San Leandro runs $1,800 to $4,200 installed, depending on material, width, and whether we’re fabricating from scratch or hanging a pre-built panel. Double gates run $3,200 to $6,400. Automatic operators add $1,200 to $2,800, and that price is quoted separately so you can see exactly what the gate costs and exactly what the automation costs. Marine-grade hardware is part of the baseline on bay-front and flatlands jobs, which costs a little more up front and saves you hinge and latch service calls down the road. We’ll visit your San Leandro property, measure the opening, and hand you a written price before you commit to anything. There’s no pressure to accept, and the price won’t change after the work starts.
We Also Serve Cities Near San Leandro
Gate Installation in San Leandro keeps us close to the neighborhoods we know best, and our crews also cover San Lorenzo, Castro Valley, Oakland, and Alameda. If you’re on the border near Bayfair or out toward the Oakland side, give us a call. We’ll confirm whether your address is in our service area and get you on the schedule with a free estimate.
Serving San Leandro, CA - Our Local Coverage Area
We’re based in the San Leandro area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in San Leandro
Most of the time, you can keep the panel. We see this constantly on the 1945-1965 tract homes: the wrought-iron or chain-link panel is still solid, but the hinge post has rotted and shifted in the footing. We pull the old post, pour a new footing, and rehang the same panel on new hardware. If the panel itself is rusted through or the frame is twisted, that’s when fabrication makes sense. Call (626) 649-4572 and we’ll tell you which one you’re looking at, often with one quick visit and no charge for the estimate.
It depends on the operator. On the 1990s-era residential units still running in San Leandro, the control board is often discontinued. We’ll check the board availability and price it against a new operator. When a new LiftMaster or FAAC operator costs less than tracking down a decades-old board and still leaves you with obsolete hardware, we tell you that plainly. You get the written numbers before you choose.
Yes. Every automatic gate we install in San Leandro gets safety photocells as a standard part of the job, not an add-on. They stop the gate from closing on a child, a pet, or a car that’s in the wrong place. If your existing gate lacks them, we’ll include them in any retrofit we do. This is not negotiable equipment on a gate that opens and closes on its own.
The marine layer is the difference. San Leandro’s bayside properties, especially around the Marina district and the strip west of I-880, sit in persistent salt-laden air that keeps metal damp and corroding. The same zinc-plated hinge that lasts a decade in the eastern hills can fail in three to five years near the bay. That’s why we baseline stainless-steel or hot-dipped galvanized hardware on any lower flatlands job.
Yes. We work the I-880 and Davis Street industrial corridor regularly, and heavy rolling steel slide gates with high-cycle operators are a normal part of our week, not an exception. We’ll spec an operator built for the number of cycles your gate actually runs, and we’ll write the quote before any work starts. Call (626) 649-4572 and tell us what the gate is doing - we’ll get a technician out to look.
Get a Free Estimate for Gate Installation in San Leandro
Call (626) 649-4572 and you’ll reach a live person, day or night. We’ll talk through what you’re seeing, schedule a visit to your San Leandro property, and hand you a written price before any work begins. Our crew will wear shoe covers, lay drop cloths, and send you a photo of the clean-up before they leave. Every installation carries the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving San Leandro since 2009.