Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pomona
Gate installation in Pomona runs $1,850 to $6,400 for most residential jobs, depending on whether you need a fabricated wrought iron panel, a full automation package, or a repair-anchored replacement. We know that range well because our crews are in Pomona every week, working on the exact gate inventory this city has: 1990s and early-2000s wrought iron driveway gates, post-WWII tract homes with mismatched posts, and operators that took a beating from years of Santa Ana wind events. If you need a straight answer on what your project will cost, call (626) 649-4572. We give a written price before any work starts, every single time.
Why Latch & Post Gate Repair Is Pomona’s Preferred Gate Installation Company
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, and we’ve worked on Pomona gates since 2009. Our technicians are background-checked and uniformed, and they’re factory-trained on the brands families in Pomona actually have: FAAC, BFT, Linear, Viking, and others. You’ll notice the difference when we show up. We lay drop cloths on the floor and put on shoe covers before we step inside, so your floors stay clean. We ask before we move or touch anything. And we take a photo of the clean-up before we leave, every visit, at no extra charge.
What Pomona homeowners tell us they value most is that we explain the price before the work. Not a vague estimate. A written number you agree to before we touch a single hinge. That’s the Cedarwell Care Promise, and it’s not an upsell. It’s how we run every job. Plus, every installation carries our 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print. Cody Beckman, who leads our gate installation work, would rather fix a detail than ever leave a customer wondering.
Gate Fabrication in Pomona
Gate Fabrication in Pomona usually means replacing a 20 to 30-year-old wrought iron panel that’s failing faster than it’s worth patching. The city has block after block of 1990s and early-2000s driveway gates, built when crime rates drove widespread retrofitting of older tract homes. Those panels are now hitting mechanical failure at the same time across entire neighborhoods, and many have powder-coat finishes so UV-degraded they’re rusting through. When the steel is compromised, no amount of hinge work will save it.
Wrought Iron Replacement Panels
We fabricate new panels to match the style and scale of your existing gate, including matching scrollwork and picket spacing where possible. For Pomona’s older housing stock, we measure from the post inward, because no two of these 50s and 60s driveways are exactly alike. A new fabricated single driveway gate typically runs $2,200 to $5,800 installed, depending on size, ornamentation, and finish. The written quote includes the exact panel spec, so you know what you’re paying for.
Tubular Steel Pedestrian Gates
Many Pomona walk-through gates were hung on posts poured for a fence, not a gate, and the result is a drifting post that looks like a sagging panel. We replace the panel and address the post. It may mean a sleeve-over concrete package around the post base or a full post replacement with proper footings, which runs $380 to $1,100 per post depending on depth and condition. We won’t hang a new gate on a failing post. That would mean fixing it twice, and you’d be paying twice.
If you’re not sure whether your gate needs patch-and-paint or full fabrication, call (626) 649-4572. We’ll come out, look at the steel, and tell you honestly which route costs less over the next five years.
Automatic Gate Installation in Pomona
Automatic Gate Installation in Pomona comes down to an operator that’s sized for the gate’s weight and a safety package that meets UL 325 requirements. It also means factoring in the winds that funnel through the Brea Canyon and Tonner Canyon passes and slam gates against their stops. We see stripped worm gears in slide-gate operators after single Santa Ana events, and we’ve learned to recommend operators with a higher cycle rating and stronger gearing for Pomona’s exposed corridors. A swing or slide gate operator package, including two remotes, safety photocells, and installation, typically runs $1,600 to $4,900 depending on gate size and existing electrical.
Swing Gate Automations
On a block off Holt Avenue in South Pomona, we replaced a mid-2000s LiftMaster swing gate operator on a wrought iron panel whose worm gear had been stripped by a single Santa Ana wind event. The panel itself was salvageable. The operator wasn’t. We re-set the hinge post footing rather than just tightening the hinges, because the post had shifted and that’s what actually caused the stress on the gear. The replacement operator came with new safety photocells, and we upgraded the keypad entry while we were on site. The full package ran about $2,800 on that job.
Slide Gate Operators
Slide gates in Pomona take a particular beating because winds here accelerate through the passes, pushing the gate panel against its end stops and reverse-loading the operator. That’s exactly how worm gears get stripped. When we install slide gate operators in Pomona, we check the end stops, the v-track or cantilever rollers, and any wind-load bracing before we mount a single component. If your gate’s been in place for 20 years and never had a wind-load assessment, this is the visit where that gets addressed.
Trusted Brands We Service in Pomona
Most of the operators we work on in Pomona are mid-2000s LiftMaster swing openers, and we keep rebuilt actuator kits and control boards for those on hand. We also service FAAC, BFT, Linear, and Viking equipment, and our technicians are factory-trained on each of those lines. For Pomona customers, that means less waiting on parts. If your opener needs a board, a gear kit, or a receiver, there’s a good chance we have it staged before we even ring your doorbell. If you’re not sure what’s on your gate, call us and describe what you see. We’ll match it over the phone.
Common Gate Installation Problems We See in Pomona Homes
- Aging wrought iron panels with failing powder coat. The intense UV here degrades powder-coat finishes faster than in coastal LA, so 25-year-old gates are rusting through at the hinge pockets. Once the steel’s compromised, full fabrication beats patching.
- Santa Ana wind damage to operators and frames. The canyon passes east of town channel wind straight into neighborhoods off Holt Avenue, Phillips Ranch, and the older corridors near downtown, bending frames and stripping slide-gate gears overnight.
- Mismatched posts on 1950s and 1960s homes. Gates were added to these properties decades after construction, often on posts that were never sized for a gate’s dead weight. Panel sag is usually post drift, and fixing one without the other means doing the job twice.
- Missing or outdated safety sensors. Gates installed before UL 325 requirements often lack photocells or edge sensors. Any new automated installation in Pomona requires these, and we won’t do a job without them.
Pricing for Gate Installation in Pomona, CA
Here’s what we’re quoting in Pomona right now. A basic tubular steel pedestrian gate without automation: $1,850 to $3,400 installed. A fabricated wrought iron driveway gate with new posts: $2,200 to $5,800. A swing or slide gate operator package with safety photocells, two remotes, and wiring: $1,600 to $4,900. A full automatic driveway gate with new panel, posts, and operator: $4,800 to $9,700 depending on width and ornamentation. Every quote is written, itemized, and agreed before we start. We don’t work off verbal numbers. Call (626) 649-4572 for a free estimate, and you’ll see the exact number in writing before you commit to anything.
We Also Serve Cities Near Pomona
Our Gate Installation team works throughout the eastern San Gabriel Valley, and if you’re in Diamond Bar, Montclair, Chino Hills, or Claremont, we cover those areas too. For everything specific to this city, Pomona homeowners can call us directly. Scheduling and dispatch are coordinated from the brand’s Los Angeles office, and crews serve Pomona locally.
Serving Pomona, CA - Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Pomona
It depends on what failed. If the wind stripped the worm gear, a rebuilt actuator kit often resolves it for $350 to $650, and the housing is worth keeping. If the control board also burned out, you’re usually looking at $800 to $1,400 in parts, at which point a new operator with a full warranty starts making more sense. We’ll test it on the first visit and give you both prices in writing. Call (626) 649-4572 and we’ll schedule a diagnosis.
In Pomona it’s almost always the post. Most gates here were added to 1950s and 1960s homes long after the original fence posts were set, and those posts were never sized for a swinging gate’s bearing. The panel looks fine because it is fine. What’s moving is the footing, and resetting the hinge post typically runs $380 to $1,100 per post. We can tell you before we dig whether it’s the post or the hinges, and we’ll show you the movement on a level. Call (626) 649-4572 and we’ll set a time to look.
Yes. Under UL 325, any new automated gate installation requires monitored photocells or a contact edge that stops and reverses the gate if something blocks its path. That goes for single-family driveway gates in Pomona too. If your existing gate was installed before those rules and doesn’t have them, we’ll add them as part of any new operator job. The safety package adds $180 to $420 to a typical install, and it’s non-negotiable on our jobs.
Winds here funnel through the Brea and Tonner Canyon passes and hit with more force than in the foothill communities around us. On a slide gate, that means the panel gets slammed against its stops, reversing load into the worm gear. On a swing gate, it slams the panel open and bends hinges or the frame itself. We size operators for Pomona’s wind load and verify the end stops before we install. If your gate’s been banging in the wind, call (626) 649-4572 before it strips a gear and locks you out.
In most cases, yes. We’ll match the picket spacing, scrollwork pattern, and rail profile from your existing panel or from photos if the original design was consistent across your block. For Pomona’s older tract neighborhoods, where entire streets were gated around the same time, we’ve matched more mid-1990s and early-2000s patterns than we can count. A matched fabricated panel runs $2,200 to $5,800 depending on size and ornamentation. Send us a photo or call (626) 649-4572 and we’ll tell you if it’s a pattern we can replicate.
Ready for a Straight Answer in Pomona?
You’re welcome to call us now. A live person answers, day or night, at (626) 649-4572. We’ll ask a few questions about your gate, get a sense of what’s there, and set a time to come look. The estimate is free. The price will be written, matched to your gate and your driveway, and agreed before anything gets touched. You won’t get pushed. You’ll get a clear number and a schedule, from a crew that respects your floors, your time, and your quiet hours.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Pomona since 2009.