Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Plano
Gate installation in Plano is not just about hanging a panel and bolting on a motor. It is about knowing what the Blackland Prairie clay under your posts will do in a wet spring, what a March hail storm does to a solid-infill ornamental gate, and whether the wiring behind your existing operator still meets today’s UL 325 entrapment-protection rules. We install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates with the post footing treated as the real foundation of the job, not an afterthought. If you’re planning a new gate or replacing one that has failed, call (626) 649-4572 for a free measure and a written price before anything gets ordered.
Key Takeaways:
- Written price before any work starts, every visit, no pressure.
- 365-Day Done Right Promise covers every gate installation.
- Shoe covers, drop cloths, and a cleanup photo on every job.
- A live person answers 24/7, nights and weekends included.
Why Latch & Post Gate Repair Is Plano’s Preferred Gate Installation Company
We have been installing and repairing gates since 2009 as part of the Cedarwell family, and our techs know the difference between a Plano estate-lot slide gate on the Tollway corridor and a 1990s cedar swing gate in east Plano. The soil, the HOA rules, the age of the operator, the wiring behind the wall, all of it changes the right way to do the job. When we quote an Gate Installation in Plano, we walk the fence line, check the footings, and look at what is already there before we recommend anything.
Every technician carries shoe covers and drop cloths, follows Cedarwell C.A.R.E. values on-site, and sends you a photo of the cleanup before leaving. That means your floors stay clean, your kids can nap through the work when needed, and you know exactly what you paid for. Our calls are answered by a live person around the clock, and the 365-Day Done Right Promise backs every install. If something is not right, Latch & Post makes it right. No argument, no fine print.
Driveway Gate Installation in Plano
Driveway Gate Installation in Plano almost always starts with the post, not the panel. A typical driveway gate install here runs $1,800 to $4,600 depending on the gate width, material, automation, and whether we are pulling the old footings and setting new ones. On Plano’s expansive clay, a gate that gets bolted onto an undersized footing will sag within a season. We spec heavier posts and deeper footings on our installs, because we have pulled too many Plano gates out of the ground after a wet spring.
Swing and Double Gate Systems
A swing gate on two hinge posts is the most common driveway setup in Plano’s older HOA communities. The Blackland Prairie clay heaves posts up in wet winters and drops them in summer droughts, which racks the gate out of plumb and binds the operator arm. We set post footings below the active clay zone where local code and good practice call for it, then re-hang the gate to swing clean on the first cycle.
Motorized Driveway Gates
Automated gates in Plano need a good operator paired with a structurally sound post system. We install and program operators from Viking, DoorKing, and Ghost Controls, set the travel limits and safety edges, and wire the UL 325 entrapment protection properly. We also check the existing wiring run. A meaningful share of Plano’s 1980s and 90s automated gates were installed under older rules, and we routinely find wire that is not up to current code once the old operator comes off.
Sliding Gate Installation in Plano
Sliding Gate Installation in Plano is the right choice for estate lots where a swing gate would arc out over a landscaping bed or drop onto a sloped drive. A typical motorized slide gate in Plano runs $2,400 to $5,800. The wide western corridor near the Dallas North Tollway has a high share of these heavier systems, and the job comes down to the track bed, the wheel assembly, and the post anchoring. In Plano’s clay, the track settles unevenly without a proper compacted base, so we build that base as part of the install.
Steel Track and Cantilever Systems
Cantilever slide gates carry their own weight and do not need a track across the driveway, which works well where a concrete ribbon would be a trip hazard or where the city’s permitted opening leaves little room. The carrier posts take all the load, so we pour those deeper than a standard gate post. On rear-drive tracks, we compact the sub-base before setting anything, because Plano’s clay will move enough to make a poorly supported track bind the rollers.
Storm Wind Loads
Solid-infill ornamental-iron slide gates catch a lot of North Texas wind, and a spread-too-thin post can lean. We size posts for the actual sail area of the gate, not the default schedule. In Plano, that difference matters during spring storm season, when a forty-mile-an-hour gust slams a six-foot-tall iron panel from the side.
Trusted Brands We Service in Plano
We are factory-trained on the brands families actually own. In Plano, that most often means Viking and DoorKing operators on the heavier estate gates, Ghost Controls on retrofit jobs, and occasional Elite hardware swaps. When you call about an operator, we usually have the common parts on the truck, not on a two-week order. That is why a gate that binds after a storm, or an operator that trips after a power blink, can often be diagnosed and repaired on the same visit. We stock local parts for Plano customers specifically so that a down gate does not stay down while a generic distributor ships from three states away.
Common Gate Installation Problems We See in Plano Homes
- Post footings that sink or heave in Blackland Prairie clay. Plano’s soil swells several inches in wet springs and shrinks in summer droughts, pulling hinges out of alignment year after year. When a motor is blamed for a gate that will not open, the real culprit is usually the post.
- Automated gates installed before current entrapment-protection rules. The city’s fence ordinance caps residential gates at six feet and requires permits for motorized openers, but many 1980s-era installs predate today’s UL 325 requirements. We often find missing or disabled safety edges and photocells, and we bring those up to code as part of the install.
- Hail and ice damage from spring storms and the February 2021 freeze. Hail cracks wood panels, and ice storms seize or short exposed operators. A gate that worked fine in the fall may be binding or dead by March.
- Solid-infill gates that act like sails in high wind. Ornamental iron with full metal infill catches a lot of wind on the wide lots in Willow Bend and Gleneagles, and that repeated side loading loosens hinges and opens post connections over time. The fix has to happen at the post, not the panel.
Pricing for Gate Installation in Plano, TX
A new driveway gate in Plano typically runs $1,800-$4,600, and a motorized sliding gate on a Tollway-corridor estate lot runs $2,400-$5,800. Pedestrian gates with lock hardware usually land in the $450-$1,200 range, and a full operator replacement with safety edges and photocells adds $850-$1,800 to the job. The biggest cost swing is the post footing: if the old footings are shallow or racked, pulling and re-pouring them is the part that protects the new gate for years. We give you a written price before any work begins, and that number is the number you pay. Call (626) 649-4572 for a free estimate, no obligation.
We Also Serve Cities Near Plano
Our crews cover all of Plano and the surrounding communities, including Allen, Richardson, Addison, and The Colony. If you are just outside the city line, the same team, the same written-price promise, and the same 365-Day Done Right Promise apply. One call gets a real person on the line, day or night.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Plano
The motor is usually fine, and the post is not. Plano sits on Blackland Prairie clay that swells and shrinks several inches a year, which racks the gate out of plumb and makes the operator fight the panel on every cycle. That binding load burns limit switches and strips gears. The fix is to pull the post, re-set it below the active clay zone, and re-hang the gate geometry so the motor only moves the panel instead of dragging it. Call (626) 649-4572, and we will check the post before we ever blame the motor.
Yes. Current UL 325 standards require safety devices that stop and reverse the gate if it contacts an obstruction, which means safety edges, photocells, or both depending on the gate type and installation. Many older Plano gates were installed before those rules or have sensors that have since failed or been disabled. On a new install we bring the protection up to current code, and on a retrofit we check the existing sensors first.
First, use the manual release, not force. Every operator has a release lever or key that disconnects the gate from the motor so you can push it open by hand. If the gate is a slide gate, you often need to pull a pin or release a lever near the drive, then push the gate off the closed position. Never try to force an automated gate against a dead operator, because that can strip the gear rack or bend the linkage. After you are through, close the gate and call us if the operator does not reset when power returns.
Yes, if the posts and footings are sized for the actual sail area of the gate. A solid-infill ornamental-iron panel in a high-wind corridor catches a lot more side load than a slatted wood gate, and the old installs were often built to a default spec. We size the posts and footing depth for the specific gate you are installing, and the geometry is set true so the panel does not work its own hinges loose in the first windy season.
Yes on the permit, and yes on the wiring. Plano requires permits for motorized openers, and the city’s fence ordinance caps residential gate height at six feet. We handle the permit-ready details on our installs, and when we open up an old operator, we inspect the existing wiring run for damage, undersized wire, or work that predates current code. If the old wiring is not safe, we will show you what we found before we quote the fix.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Plano since 2009.
Ready to get a written price on your Plano gate installation? Call (626) 649-4572 and a live person will answer, any hour, any day. We will set a time to measure the opening, check the soil and the old wiring, and put the full price in writing before you decide anything.