Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pecan Acres
Gate installation in Pecan Acres usually means a wide, heavy steel or pipe-and-rail gate on a long gravel driveway, often powered by solar because mains power doesn’t reach the entrance. That’s the job we focus on here. We run gate crews from the Dallas-Fort Worth office, so we know Tarrant County clay, county permitting rules, and how to set a hinge post that won’t lean after one wet season. If your entry gate won’t hold a plumb line or your opener gives up after an ice storm, call us at (626) 649-4572. We’ll send a technician who can diagnose the gate and the ground under it the same visit.
Why Latch & Post Gate Repair Is Pecan Acres’s Preferred Gate Installation Company
Latch & Post works under the Cedarwell family of independently owned and operated gate specialists, and we’ve done so since 2009. In Pecan Acres, that matters for a specific reason: most of these properties were built with owner-installed ranch gates, not contractor-set systems. Our technicians see more hand-dug post holes and agricultural T-posts here than anywhere else, and they know what that means for a new installation. Before we quote a gate, we look at the post depth, the clay movement, and the actual swing radius the driveway allows.
Every job carries a written price before we touch anything. That is not an option. You get a number, you read it, we proceed only when you say so. The crews wear shoe covers when they step into your home to reach a control panel, lay drop cloths where they work, and send a photo of the clean-up before they leave. When kids are napping or a dog is nervous, we use quiet tools and keep the schedule sane. Those specifics are part of the Cedarwell C.A.R.E. values: Clean up like it is our own home. Ask before we move anything. Respect the family’s time. Explain the price before the work.
Gate Opener Installation in Pecan Acres
Gate opener installation in Pecan Acres often means putting a solar-charged operator on a wide ranch swing or slide gate at the end of a gravel drive, where running 120-volt power down the full length of the property is either impractical or four figures before any gate work begins. A solar opener with a deep-cycle battery, keypad entry, and a safety photocell typically runs $2,400 to $5,600 installed here, depending on gate width, leaf weight, and whether we need to reset posts before mounting the arm. When the drive is short enough to trench power, the operator itself runs less, but the conduit, wire, and pedestal work add material and labor.
Solar Operators for Rural Entrances
Long gravel approaches make solar the practical choice in Pecan Acres. We size the panel and battery bank for the actual number of cycles the gate runs each day, plus enough reserve for a five-day stretch of winter overcast. The operator bolts to a structural post or fabricated mount, not to a leaning T-post.
Automatic Keypads and Safety Edges
We install keypads on a concrete-set pedestal with conduit run below frost line, because hard freezes crack surface-mounted conduit like a twig. Safety edges and photocells get tested as part of every installation, since the UL 325 entrapment-protection check on a Pecan Acres gate is something the owner and installer enforce, not a city inspector from a municipal code office.
Gate Fabrication in Pecan Acres
Gate fabrication in Pecan Acres is the answer when a stock panel gate from a farm supply store is too narrow for a ranch truck and trailer, or too light for daily automated cycling. We build pipe-frame and steel swing or slide gates to the width and height the driveway actually needs, usually 12 to 22 feet across for a double gate with a drop bar or center stop. A fabricated steel single swing gate, primed and painted, typically runs $1,800 to $4,200 in Pecan Acres before an opener, depending on steel gauge, frame depth, and whether we reuse existing posts or pour new concrete footings.
Wider Gates for Equipment and Livestock
Most factory gates are built for a 10-foot opening. Ranch drives with hay trailers and stock trailers need 14 or 16 feet, and squeezing a truck through a narrow gate every day is how posts get hit and hinges get sprung. We fabricate to your actual opening and hang on a plumb structural post.
Structural Hinge Posts Set in Clay
On a recent gravel-drive entry off a rural lot in the Pecan Acres area, a homeowner’s DIY swing gate was hung on hand-dug ag T-posts set maybe a foot deep, and the whole leaf had twisted out of plumb after the last wet cycle. We excavated and reset a proper hinge post on a concrete footing, fabricated a pipe frame wide enough for the ranch truck and trailer, then mounted a solar opener with a keypad and photocell so the operator could run without trenching mains power down the driveway. That gate swings true now because the post carries the load instead of fighting a moving clay foundation.
Trusted Brands We Service in Pecan Acres
Our technicians are factory-trained on the gate operator brands families around Pecan Acres actually run. We service and install FAAC, BFT, and Linear equipment, and we keep common actuator arms, control boards, and safety-edge components in local stock so a repair doesn’t wait on a two-week part order. If your gate has a Viking legacy panel or a BFT slide motor, we can diagnose it on the first visit. If the brand on your gate is something else entirely, tell us when you call, and we’ll tell you straight whether we can work on it before we dispatch.
Common Gate Installation Problems We See in Pecan Acres Homes
- Tilting hinge posts from shrink-swell clay. The Blackland Prairie and Cross Timbers soils under Pecan Acres shrink in drought and heave after rain. Any post set shallow, or set without concrete, leans within a season or two, and the gate starts dragging or binding.
- DIY posts that were never structural. Many original gates around Pecan Acres were hung on agricultural T-posts or hand-dug holes with no concrete depth. The gate looks fine until an opener mounts to it, and then every cycle torques the post a little further out of line.
- Wide ranch gates paired with undersized openers. A 16-foot pipe gate is heavy. A residential arm opener rated for a 10-foot gate strains on every cycle, the rack slips, and sag correction never holds. New fabrication plus a properly sized operator is the actual fix.
- Ice-seized operators and cracked conduit. The region’s hard freezes seize automatic gate operators and crack conduit runs to keypad pedestals. In solar installations near Pecan Acres, we bury conduit below frost line and use operators with cold-weather lubrication and gear protection.
Pricing for Gate Installation in Pecan Acres, TX
A straightforward single swing gate, fabricated steel and set on one new concrete hinge post, runs $1,800 to $3,200 in Pecan Acres. Add a solar opener with keypad and photocell, and the full installation lands from $2,400 to $5,600, with the spread mainly driven by gate width, leaf weight, and how much post-reset work the clay demands. Double gates or slide gates run higher because the fabrication is heavier and the operator load is doubled. You’ll see the exact number in writing before we order steel or dig a hole, and the price we quote is the price the invoice matches, agreed before any work starts. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Pecan Acres
Latch & Post Gate Repair runs crews from the Dallas-Fort Worth office into the rural Tarrant County communities around Pecan Acres. We take gate installation and repair calls from Houston, San Antonio, Dallas, and Fort Worth, with the same written-price rule and the same 365-Day Done Right Promise on every job. If your property sits in Pecan Acres or on the acreage around it, we’ll send a technician who knows the difference between county jurisdiction and city code. Our Gate Installation team handles new builds, replacements, and automation for rural and suburban entrances alike.
Serving Pecan Acres, TX - Our Local Coverage Area
We’re based in the Pecan Acres area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Pecan Acres
Yes, and it’s the most common installation type we do around Pecan Acres. We mount a solar operator with a deep-cycle battery bank, keypad entry, and safety photocell, sized for your gate’s weight and daily cycles, with enough reserve for a few days of winter overcast. You get a working automatic gate without trenching power down a long gravel drive, and the price is written before we start. Call (626) 649-4572 and we’ll walk the entrance with you.
Most of the time, the post is the problem. In Pecan Acres, Blackland Prairie clay shrinks and heaves through wet and dry cycles, and a hinge post set shallow or without a proper concrete footing leans, which drags the gate leaf down. We’ll tell you which one is actually failing before we quote, because hanging a new leaf on a moving post wastes the leaf. For an exact quote on your gate, call (626) 649-4572.
We set the operator pad on a concrete footing, mount the rack with enough clearance for seasonal ground movement, and bury all conduit below frost line so hard freezes don’t crack the runs to keypads or pedals. In Pecan Acres, that means the operator keeps running through the same wet and dry cycles that tilt shallow posts out of plumb. Call (626) 649-4572 and we’ll look at your slide gate and the ground it rides on.
No, because Pecan Acres falls under Tarrant County jurisdiction rather than a municipal code, so an automatic gate system is not triggered into a city permit-and-inspection pipeline the way it would be in an incorporated town nearby. That means the UL 325 entrapment-protection check is something the owner and installer enforce, and we test photocells and safety edges on every automated install. Call (626) 649-4572 if you want to know what your specific entrance needs.
Yes. We fabricate pipe-frame swing and slide gates to whatever width the driveway and the equipment actually need, typically 12 to 22 feet for a double gate in Pecan Acres, and we hang them on proper concrete-set posts so a hay trailer or stock truck clears without clipping a hinge. Most factory gates stop at 10 feet, and that’s not enough for what runs through these drives. Call (626) 649-4572 with your opening width and we’ll give you a written number.
If your Pecan Acres gate is leaning, dragging, or too narrow for the trailer, call Latch & Post Gate Repair at (626) 649-4572. You’ll speak with a live person, get a free estimate, and see a written price before any work begins. Cody Beckman leads the crews that serve Pecan Acres, and he treats every entrance like it matters, because it does.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Pecan Acres and the surrounding Tarrant County communities since 2009.