Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mukilteo
A new driveway gate in Mukilteo typically runs between $4,200 and $9,800 for a single swing gate, and $6,500 to $14,000 for a sliding gate with automation. Those are real numbers for this market, not placeholder figures. We install gates on the bluff streets above Possession Sound every month, and we know what the salt air does to hardware that inland suppliers spec without a second thought. If you’re planning a gate on a Mukilteo property, call (626) 649-4572 and we’ll give you a written price before anything gets ordered.
Why Latch & Post Gate Repair Is Mukilteo’s Preferred Gate Installation Company
We’ve been installing and repairing gates since 2009 as part of the Cedarwell family, and our Gate Installation team has spent enough time on Mukilteo’s west-facing properties to know exactly what the marine environment demands. Homeowners here tend to ask sharper questions than most, because they’ve watched a neighbor’s gate rust through at the welds or an opener board die after a few winters. We answer those questions with specifications, not sales talk.
Every Mukilteo job starts with a written price. Before we touch anything, you see the full number, the hardware list, and the labor breakdown. Our technicians show up in uniform, put on shoe covers if we step inside, and lay drop cloths wherever we’re working. When the job’s done, we take a photo of the clean-up before we leave. If the installation isn’t right within 365 days, we come back and make it right under the Done Right Promise. No fine print, no argument.
You’ll also get a live person when you call, any hour. Nights, weekends, holidays. That matters in Mukilteo, where a dead gate opener on a bluff-top home can mean a car trapped in a driveway with no street access.
Driveway Gate Installation in Mukilteo
Driveway Gate Installation in Mukilteo almost always means working with slope, wind, and salt. The residential streets climbing away from the waterfront, particularly along Mukilteo Speedway and into the Harbour Pointe area, sit high enough to catch full westerly gusts off Possession Sound. That wind pushes against a swing gate panel constantly, which changes how we size hinges and posts.
A single swing gate for a standard two-car driveway here runs $4,200 to $9,800, including the operator, safety edges, and installation. Double gates, which many Mukilteo homeowners prefer for wider driveways, run $7,500 to $14,500. You’ll see the exact number in writing before we order a single component.
Stainless hardware on the coast
We spec 316 stainless hinges, fasteners, and internal frame hardware on Mukilteo installations by default. It costs a bit more upfront, about $300 to $600 depending on the gate, but it’s the difference between a gate that still opens smoothly in ten years and one that seizes solid after three winters. We also recommend galvanized post footings rather than painted mild steel.
Operator protection near the Sound
Salt-laden air gets into control boards through vent slots and terminal blocks. On bluff-top properties, we mount operators in sealed enclosures and use dielectric grease on every connection. It’s a small step that prevents the most common opener failure we see in Mukilteo: corrosion on the limit switches and loop detector wiring.
Sliding Gate Installation in Mukilteo
Sliding Gate Installation in Mukilteo is the right call for driveways that climb steeply or have limited swing clearance. Many homes off Mukilteo Speedway and in the older neighborhoods near the ferry terminal have short, angled approaches where a swing gate would hit the slope or block a sidewalk. A sliding gate rides a track instead, which handles those constraints better.
Sliding gate installs in Mukilteo run $6,500 to $14,000, depending on gate width, track length, and automation. The track itself matters more than people expect, especially with the wind we get. A lighter aluminum gate on a shallow track will rack out of alignment in the first winter storm off the Sound. We build track bases deeper and heavier than inland standard.
Wind-rated track and frame
We’ve replaced enough bent slide-gate track along the bluff streets to know what holds. Galvanized steel track with concrete anchors at no more than 12-inch spacing, plus a reinforced steel gate frame, keeps the rack and pinion from jumping under wind load. Aluminum panels are fine as a cladding, but the structural frame needs to be steel on exposed Mukilteo properties.
Safety sensors on every install
Every sliding gate we install in Mukilteo gets paired photocells and a reversing edge, wired to a monitored entrapment protection circuit. That’s not an upgrade here, it’s baseline. Kids and dogs are part of life in these neighborhoods, and a sliding gate carries real pinch force.
Trusted Brands We Service in Mukilteo
We’re factory-trained on the brands Mukilteo homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. FAAC and BFT hydraulic operators are common on heavier Mukilteo gates, and Linear boards show up in a lot of older systems near the waterfront. We keep common replacement parts staged for this area, which means faster turnaround when a board or limit switch fails. You don’t wait a week for a part to ship from a distributor.
Common Gate Installation Problems We See in Mukilteo Homes
- Seized hinge pins after winter. Freeze-thaw cycling plus salt air locks up galvanized or painted steel hinge pins. The gate won’t move until the hinge post and hardware are replaced with stainless. We see this every spring on older gates near the ferry terminal and beachfront.
- Corroded operator boards and limit switches. The marine air off Possession Sound gets into vented operator enclosures and eats terminal blocks and circuit traces. LiftMaster, FAAC, and BFT units on bluff streets fail years before identical units in Lynnwood or Bothell. Sealed enclosures and conformal coating extend their life substantially.
- Wind-racked aluminum panels and misaligned track. Winter storms off the water bend lighter aluminum swing panels and throw slide-gate track out of alignment. The operator trips its obstruction sensor continuously, and the gate refuses to close or reverses mid-cycle.
- Rusted steel frames at the welds. Powder-coated steel gates rust from the inside at weld points and post bases, especially within a few hundred yards of the Sound. Paint hides it for a while, but the structural damage shows eventually. Galvanized or stainless replacement frames are the only real fix on waterfront properties.
Pricing for Gate Installation in Mukilteo, WA
A standard single swing driveway gate in Mukilteo runs $4,200 to $9,800 installed. Double swing gates run $7,500 to $14,500, and sliding gates run $6,500 to $14,000. Those figures include operator, safety equipment, hardware, and labor. What pushes a Mukilteo job toward the high end is usually exposure: bluff-top properties need heavier frames, stainless hardware, sealed operator enclosures, and sometimes concrete work for posts and track. The price you’re quoted is the price you pay. We put it in writing before any work starts, and estimates are free. Call (626) 649-4572.
We Also Serve Cities Near Mukilteo
While this page is built for Mukilteo, our crews also handle Gate Installation in Mukilteo and the surrounding communities. We work regularly in Mill Creek, Everett, Lynnwood, and Edmonds, and we’re familiar with the housing stock and gate styles in each. The same written price, the same 365-Day Done Right Promise, the same cleanup standard applies everywhere we go.
Serving Mukilteo, WA - Our Local Coverage Area
We’re based in the Mukilteo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Mukilteo
Mukilteo gate openers fail faster because Possession Sound salt air corrodes control boards, limit switches, and loop detector wiring directly. Lynnwood and Bothell sit inland, shielded from persistent marine air, so their operators don’t see the same corrosion load. On Mukilteo bluff streets, the problem compounds with unobstructed west wind driving salt spray into vented enclosures. Sealed operator enclosures and dielectric grease on connections reduce this failure mode significantly. Call (626) 649-4572 if your operator board has visible corrosion or won’t respond.
316 stainless steel is the baseline for hinges, fasteners, and internal frame hardware within a few hundred yards of Possession Sound. Galvanized steel posts with concrete footings hold up well, but painted mild steel rusts through at welds and hinge points within a decade. For operator components, a sealed enclosure with gasketed openings matters more than the brand of the board. We spec stainless and sealed enclosures on every waterfront Mukilteo installation, and the price difference is modest compared to replacement cost.
Freeze-thaw cycling paired with salt air almost certainly seized the hinge pins or corroded the limit switches. This pattern is common on Mukilteo gates after winter, especially on bluff-top properties. The gate frame itself is often fine, but the pins are locked in place or the operator board has corrosion across the terminals. We replace the hinge hardware with stainless and assess the operator before condemning the gate. Most of these failures are repairable rather than requiring full replacement.
Yes. Every automatic gate we install in Mukilteo includes a UL 325-compliant entrapment protection system with paired photocells and a reversing edge. This is not optional equipment and we don’t treat it as an upgrade. The reversing edge and sensors stop the gate if a child, pet, or vehicle is in the path. On sliding gates, we also monitor the circuit so a faulted sensor prevents operation rather than bypassing it.
Usually yes, if the frame itself hasn’t rusted through. We reset the hinge post, re-level the panel, and replace worn hinge pins with stainless. On a bluff-top property off Mukilteo Speedway, we replaced a seized mild-steel hinge post and swapped in 316 stainless hinges and fasteners, then re-levelled the sagging panel so the gate cleared its stop without dragging. If the frame is structurally compromised, replacement is the honest answer, and we’ll walk you through why. Call (626) 649-4572 for a free assessment.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Mukilteo since 2009.