Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Miami
Gate installation in Miami almost always starts with one phone call to the HOA management office, not the hardware supplier. Most gated communities in Miami-Dade require architectural review board approval before a single post hole is dug, and that signed letter dictates the height, finish, and sightline you’re allowed to build. We’ve handled enough of these approvals across Coral Gables, Doral, Kendall, and the barrier islands that we can tell you what the board will flag before you pay the application fee. Call (626) 649-4572 and we’ll walk you through exactly what your community’s recorded design standards require.
Why Latch & Post Gate Repair Is Miami’s Preferred Gate Installation Company
We’re a Cedarwell-family gate specialist, and that means gates are the entire job, not a side line between kitchen remodels and ceiling fans. Miami homeowners keep calling us back because we show up with a written price before any work starts, lay drop cloths and wear shoe covers before stepping inside, and send a photo of the clean-up before we leave. No argument, no fine print. The 365-Day Done Right Promise backs every gate install we do in Miami, so if something isn’t right a year later, we make it right.
Most of our Miami work comes through management companies and board members in the HOA subdivisions off Bird Road, Sunset Drive, and the gated enclaves around Cocoplum and Gables Estates. They know our technicians are background-checked, uniformed, and trained on FAAC, BFT, LiftMaster, and Linear operators, which covers the brands actually installed in this market. A live person answers our phone at 3 a.m. and at 2 p.m. on a Tuesday, every day of the year.
Gate Installation Services in Miami
Gate Installation Services in Miami means building a driveway, pedestrian, sliding, swing, or double gate that survives salt air, hurricane debris, and an HOA design committee. A new gate has to clear three hurdles: the board’s recorded design standards, the county’s wind-load and entrapment-protection requirements, and the corrosion conditions specific to your lot. We handle all three, in that order.
Driveway and Sliding Gates
Sliding gates dominate the large HOA subdivisions in Doral, Kendall, and Homestead because they fit tight setbacks and long driveways. A typical sliding driveway gate install in Miami runs $4,200 to $9,800 installed, depending on panel material, track length, and operator. Aluminum with a powder-coat finish holds up best against the salt air, and we specify hot-dip galvanized or stainless fasteners as standard, never zinc-plated.
Pedestrian and Double Swing Gates
Pedestrian gates around Coral Gables and Coconut Grove lean toward ornamental steel or wrought iron matched to the estate’s architectural style. A single pedestrian gate with a keypad entry typically lands between $1,400 and $3,600 in Miami, and double swing driveway gates start around $5,500 and run to $12,000 or more for custom steel. The written quote includes the post footings, hinges, closer, and any lockset the board has approved.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Miami
Electric Gate Installation in Miami adds the operator, the safety devices, and the power run to the mechanical gate itself. Miami-Dade enforces entrapment protection standards, so every automated gate we install includes safety photocells or contact edges wired into the operator before the gate is ever cycled. We pull the permit scope through the HOA approval letter so the board and the county are both satisfied.
Operators and Access Control
We install FAAC, BFT, Linear, and Viking operators daily in Miami, and we stock their common control boards and gearboxes locally so a failed operator isn’t waiting on a freight truck from Ohio. A new operator with two remotes and a keypad entry typically runs $1,800 to $4,700 in Miami, depending on gate weight and duty cycle. For shared HOA entry points, we tie the operator into the community’s existing access system, including loop detectors and vehicle sensors.
Keypads, Intercoms, and Resident Access
Miami’s gated communities run on resident access systems, and a new gate has to talk to whatever is already installed. We wire in keypads, telephone entry units, and HOA directory systems so the gate opens for residents without fumbling for a remote. Quiet operation matters in these subdivisions too, which is why we choose belt-drive or low-noise operator options where the board allows them.
Trusted Brands We Service in Miami
We’re factory-trained on the brands Miami’s gated communities actually use: FAAC, BFT, LiftMaster, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because the right fix on the first visit depends on knowing the specific control board revision and gear-train torque of the operator already on the property. For new installs, we stock common parts and compatible operators locally in Miami, so a replacement board or a new remote doesn’t have to ride a UPS truck for a week.
Common Gate Installation Problems We See in Miami Homes
- Hinge posts rusted through at the footing line. Salt air and canal-adjacent humidity wick moisture into the post base, rotting steel from the inside while the visible part still looks serviceable. We routinely pull out posts that snap off at the concrete like a rotted tooth, and the fix is a hot-dip galvanized or stainless post sleeve set into fresh concrete.
- HOA design committee rejections. Boards flag gate heights, finishes, and sightline obstructions that don’t match the community’s recorded design standards, and the install stalls indefinitely. We submit the written spec with the architectural application so the board sees exactly what the gate will look like before we order steel.
- Storm debris bending frames and knocking sliding gates off track. After a summer blow, we see twisted pickets, broken wheels, and gates hanging off their rollers on the barrier islands and canal-front lots. A gate installed with loop detectors and safety photocells is far easier to recommission after a storm than one that was never wired for entrapment protection.
- Undersized operators on double swing gates. Heavy steel double gates need a torque-rated operator, and a cheap swing opener burns out its gearbox within two years in Miami heat. We size the operator to the gate’s actual weight and wind exposure, not the manufacturer’s optimistic rating.
Pricing for Gate Installation in Miami, FL
Here are real Miami numbers, not vague ranges. A pedestrian gate install runs $1,400 to $3,600. A sliding driveway gate runs $4,200 to $9,800. A double swing driveway gate runs $5,500 to $12,000-plus. Add an operator and access control and you’re in the $2,300 to $6,500 range for the automation, depending on gate weight and the existing access system. What moves the price up: custom ornamental steel, long power runs from the panel, hurricane-rated hardware, and post footings in coral rock or muck, which take longer to dig. Every quote is written and agreed before any work starts. Call (626) 649-4572 for an exact number on your gate, and we’ll come out and measure for free.
We Also Serve Cities Near Miami
Our installation crews cover the communities around Miami as well: Miami proper, plus Miami Beach, Coral Gables, Key Biscayne, and Hialeah. If your HOA or management company needs Gate Installation work coordinated across multiple properties in the area, one call handles the scheduling.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Miami
Yes. Miami-Dade HOAs with recorded architectural review authority can force removal of a gate that was installed without written board approval, even after it’s fully functional and paid for. The approval letter is tied to the specific height, finish, and sightline of the gate as approved, so deviating from that spec is the fastest way to get a removal notice. We always pull the signed architectural approval before ordering steel or cutting concrete, and we keep a copy on file for the management company. Call (626) 649-4572 if you need to know what your community’s recorded design standards actually require.
The post fails first because standing water and salt wick up into the base of the post where it meets the concrete footing, corroding the steel from the inside while the visible part above grade still looks intact. On Miami’s barrier islands and canal-front lots, that pattern shows up in under five years. We set hot-dip galvanized or stainless post sleeves into the footing on every new install near salt water, which is the only reliable way to stop it. Call (626) 649-4572 and we’ll price a post replacement with the right material for your lot.
Yes, entrapment protection is required. Miami-Dade enforces federal UL 325 safety rules on every automated gate, which means safety photocells or contact edges wired into the operator and tested before the gate is placed in service. We wire the safety circuit into the operator on every electric gate installation we do in Miami, and we test each device with the gate under load. Call (626) 649-4572 for a free quote on a gate that meets the county’s requirements.
We start by reading the community’s recorded design standards and architectural guidelines, then we submit the written spec, a photo rendering if needed, and the finish chips to the management company for board review. Once the signed approval letter is on file, we schedule the work, pull any county permits, and communicate the timeline to the management office so residents know when the entry point will be down. The management company gets a copy of the signed approval and a photo of the clean-up before we leave. Call (626) 649-4572 to get the process started.
We install and service FAAC, BFT, LiftMaster, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators and gates. In Miami’s HOA subdivisions, FAAC and BFT are the two most common operators on sliding and swing gates, and we stock local parts for both so a repair isn’t stalled by a nation-wide backorder. Call (626) 649-4572 for a free estimate on a new gate built around the brand your community already uses.
Need a gate installed in a Miami gated community, or want to know what your HOA will approve before you file the application? Call Latch & Post Gate Repair at (626) 649-4572. We’ll give you a written price, handle the architectural approval, and leave your floors clean and your paperwork in order.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Miami, FL since 2009.