Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Long Beach
A new gate installation in Long Beach typically runs $2,800 to $9,500 for a standard residential driveway, while custom ornamental iron on a Naples canal-front property usually falls between $7,000 and $18,000. Most installations are completed in one to three days once the gate is fabricated or sourced. If you’re weighing options for your home off Park Avenue or near the boardwalk, call us at (626) 649-4572 and we’ll give you a written price before any work begins.
We know Long Beach’s streets, its building stock, and the salt air that eats unprotected steel faster than anyone expects. Our installers live with the same marine layer you do. That’s why we spec marine-grade hardware on every coastal install and why we never put a heavy custom gate on a footing that wasn’t built for it. The estimate is free, the price is written down before we touch anything, and every job is backed by our 365-Day Done Right Promise.
Why Latch & Post Gate Repair Is Long Beach’s Preferred Gate Installation Company
We focus on one trade: gates. The latch that holds them and the post that carries them. That’s the whole job, and it’s been our whole job since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Most companies in Long Beach will hang a gate and move on. We fabricate, install, and then stand behind the work for a full year under the 365-Day Done Right Promise. If it’s not right, we make it right. No argument, no fine print.
Long Beach homeowners care about how a crew leaves the house. Our technicians wear shoe covers and lay drop cloths before stepping inside, clean up after the install, and send you a photo of the finished cleanup before they leave. That’s the Cedarwell C.A.R.E. routine: Clean up like it’s our own home, Ask before we move or touch anything, Respect your time and quiet hours, Explain the price before the work. We can also schedule around nap time if you have a sleeping toddler and a gate that can’t wait.
Long Beach sits in a unique spot. Fifteen minutes separates the high-end canal-front homes of Naples from the trucking yards off the 710 approach in West Long Beach. We install both: silent ornamental gates on underground operators for waterfront owners, and high-cycle commercial slide gates built to log 300 to 500 opens a day. That split doesn’t exist in Torrance or Seal Beach, because neither has a port. It does exist here, and we’ve learned to build for both sides of it.
Gate Fabrication in Long Beach
Gate fabrication in Long Beach means building a gate from raw steel or aluminum to the exact dimensions, weight, and style your property demands. Homes built after the 1933 earthquake left Long Beach with a large stock of 1930s to 1950s stucco bungalows and ranch homes, many still fronted by original tubular-steel or wrought-iron driveway gates now decades past their design life. When a homeowner wants that same look but wants it to last, we fabricate to match the original profile and then upgrade the materials underneath. A custom-fabricated residential gate in Long Beach typically runs $4,500 to $14,000 depending on size, ornamentation, and hardware spec.
Ornamental Iron Gates for Naples Canal-Front Homes
Naples properties demand a different standard. The canal humidity compounds the ocean salt air, so raw mild steel starts showing surface rust at the welds within two years if it isn’t sealed properly and the hardware isn’t marine-grade. We fabricated a custom ornamental iron driveway gate for a canal-front home in Naples, matched to a LiftMaster operator sunk in an underground vault so nothing showed above the brick. The gate ran on a rack and pinion drive with safety photocells and a keypad entry tied into the existing intercom and camera post. Because canal humidity plus marine air had already killed the original steel hinges, we set the hinge post in a deeper concrete footing and sealed every weld so it would swing silently for years instead of months. That’s the difference between a gate that lasts and one that becomes a maintenance project every spring.
Matching Existing Wrought Iron and Home Character
A lot of Long Beach gates were built to match original architectural details: rounded arch tops over a 1940s bungalow courtyard, scroll work on a Belmont Heights ranch. We keep sample profiles and can fabricate a new gate that reads as the same gate, just solid again. Powder coating goes on after fabrication, and we spec zinc-plated or stainless hardware where the marine layer would otherwise eat chrome plate within a few years.
Automatic Gate Installation in Long Beach
Automatic gate installation in Long Beach pairs a fabricated or pre-built gate with an operator, safety system, and access control sized for how the gate actually gets used. A single-family swing gate off Lido Boulevard might open four times a day. A commercial slide gate on a West Long Beach freight yard might cycle 400 times before dinner. Those are not the same install. Residential automation in Long Beach typically runs $1,800 to $4,500 added to the gate itself, while a high-cycle commercial slide system with heavier rollers and track starts around $6,000 and climbs with duty-cycle requirements. Every automatic install we do includes entrapment protection per current safety standards, wired or solar as the site allows, and a written price before any work starts.
Underground Operators for High-End Driveway Gates
On a Naples or Peninsula canal-front property, the homeowners usually want the operator invisible. We sink FAAC and BFT underground operators in a vault below the hinge post so the brick driveway sweep stays clean above ground. These installs take longer, cost more, and demand precision: the vault has to drain, the operator has to be sized for a heavy ornamental gate, and the release mechanism has to be reachable by hand. For that market this is not an add-on. It’s the standard. We’ve done enough of these in Long Beach to get it right the first time, and the Gate Installation team carries the right operator specs on the truck for coastal duty.
Access Control and Entry Matching
Where a Long Beach home has an existing intercom or camera post, we tie the gate keypad and phone-based entry into that same post so the curb line doesn’t get cluttered. For commercial yards we program card readers, keypads, and vehicle detection loops sized for truck traffic. Access control is where an automatic install either feels finished or feels like an afterthought. We aim for finished.
Trusted Brands We Service in Long Beach
Factory-trained on the brands Long Beach families and fleet managers actually run, including FAAC, BFT, Linear, and Viking. If your existing operator is one of those, we’ll match the new system to it or replace it cleanly. For Long Beach customers we keep common board, gear, and roller parts local where we can, so a failed opener doesn’t mean a week of waiting. The right fix on the first visit matters here because a broken gate on a canal-front home or a freight yard is not something you leave for later.
Common Gate Installation Problems We See in Long Beach Homes
- Salt-air corrosion on new steel. The marine layer that hangs over Long Beach carries salt-laden moisture that oxidizes raw steel frames, welds, and zinc-plated hinge hardware within a few years. Even a fresh ornamental iron install will show surface rust unless the metal is sealed and the hardware is spec’d marine-grade.
- Undersized hinge-post footings on heavy custom gates. A heavy ornamental swing gate needs a deep, properly sized concrete footing under the hinge post. When the footing is undersized, the gate sags at the post rather than mid-panel. The panel is fine; the foundation is the failure point.
- Worn V-groove rollers and bent bottom tracks on port-corridor commercial gates. West Long Beach trucking-yard slide gates cycle hundreds of times daily, which wears V-groove rollers flat and bends bottom tracks in months, not years. High-cycle installs need heavier roller and track specs than residential work, and ordering the residential-spec part just creates the same failure again.
- Naples canal-front hardware degradation. Gates on the Naples canals face compounded corrosion, ocean salt air plus constant canal humidity. Hinges, rollers, and operator internals rust out measurably faster than a few miles inland. Hardware that might last a decade in Downey lasts a few years on the water, so we spec stainless and marine-grade where it matters.
Pricing for Gate Installation in Long Beach, NY
You’ll see exact numbers in writing before we order anything. A standard residential single swing gate in Long Beach runs $2,800 to $5,500 installed with a basic operator. A double driveway gate typically runs $5,000 to $9,500. Custom ornamental iron fabrication starts around $4,500 and on a Naples canal-front build can reach $18,000 with underground operator, matched access control, and marine-grade hardware throughout. Commercial slide gates for West Long Beach industrial yards generally start at $6,000 and climb with duty cycle and track length. The price is agreed before any work starts, always. Call (626) 649-4572 for a free estimate, and you’ll have a written number before anyone picks up a tool.
We Also Serve Cities Near Long Beach
We work throughout the South Shore and central Nassau: Freeport, Hempstead, Levittown, and Hicksville among them. If you’re searching for Gate Installation in Long Beach, chances are we cover your street. Dispatch and scheduling are coordinated from the brand’s New York City office, and crews serve Long Beach locally.
Serving Long Beach, NY - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Long Beach
Canal-front gates face two corrosion sources at once: the salt-laden marine layer from the Pacific and constant humidity rising off the canals. That combination oxidizes steel frames, welds, and zinc-plated hardware faster than inland Long Beach addresses, where the air is drier and less salt-heavy. The fix is marine-grade hardware spec and proper sealing at fabrication, otherwise surface rust shows up within two or three years instead of ten. Call (626) 649-4572 and we’ll spec it right the first time.
Yes, we install underground operators from FAAC and BFT on Long Beach properties where the homeowner wants nothing visible above the driveway line. The operator goes into a drained vault below the hinge post, and the gate runs quietly on a rack and pinion drive. These installs cost more and take longer, but on a Naples or Peninsula property the clean brick line is exactly the point.
Yes. Long Beach has a deep stock of 1930s to 1950s homes with original wrought-iron and tubular-steel gates, and we fabricate replacements that match the original profile with better materials underneath. We keep profile samples and powder coat the finished gate to match the home’s era and detailing. If you have a photo of the original, that’s the starting point.
A commercial slide gate on a trucking yard may cycle 300 to 500 times a day, which demands heavier rollers, a stronger track, and a high-duty-cycle operator. A residential swing gate might open four times a day, so the specs are entirely different. Installing commercial-grade hardware under residential expectations fails in months, and we’ve seen plenty of worn-flat V-groove rollers and bent bottom tracks to prove it. Call (626) 649-4572 for a commercial quote with the right duty cycle on paper.
Yes, current safety standards require entrapment protection on automatic gate installations, including photocells, edge sensors, or contact sensors designed for the specific gate type and site. We install entrapment protection on every automatic gate we put in, residential or commercial. It’s not an add-on we quote separately; it’s part of a correct install, and it’s itemized in your written price before work starts.
Contact Latch & Post Gate Repair in Long Beach
For a free estimate on a new gate, an automatic operator, or fabricating a custom gate to match your home, call (626) 649-4572. A live person answers, day or night. You’ll get a written price before any work begins, a crew that leaves your floors clean and your quiet hours respected, and a full year of the 365-Day Done Right Promise behind the install. Whether you’re on a Naples canal, off Park Avenue, or running a yard in West Long Beach, we build gates for how Long Beach actually lives.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Long Beach since 2009.