Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Long Beach
Gate installation in Long Beach runs $1,450 to $6,800 for most residential jobs, with custom-fabricated ornamental gates on canal-front properties in Naples going higher because of marine-grade hardware requirements. We’re Latch & Post Gate Repair, part of the Cedarwell family of gate specialists, and we coordinate every Long Beach job from our Los Angeles office with crews who work these neighborhoods weekly. Call (626) 649-4572 and a live person answers, day or night, to schedule a free measure and written price.
Why Latch & Post Gate Repair Is Long Beach’s Preferred Gate Installation Company
We stay busy in Long Beach because the housing stock here demands more from a gate than most installers expect. The 1930s through 1950s stucco bungalows and ranch homes that define the Eastside, Bixby Knolls, and Naples were mostly built with original tubular-steel driveway gates sitting on posts that have spent 70-plus years in salt air. A new gate panel mounted to a failing post is a waste of money, and we tell customers that before we quote anything. Cody Beckman, who leads our team, made it a rule years ago: we inspect what a new gate will hang from before we talk panel options.
Every visit includes the Cedarwell Care Promise in writing. We put on shoe covers and lay drop cloths before stepping inside your home. We ask before moving anything. We use quiet tools when kids are asleep or a baby is napping. And we photograph the cleanup before we leave, so there’s no question about how the job site looked when we finished. The 365-Day Done Right Promise covers every installation we do in Long Beach. If it isn’t right, we make it right. No argument, no fine print.
Sliding Gate Installation in Long Beach
Sliding Gate Installation in Long Beach is the most common request we get from homes on wider lots in Los Altos, Naples, and the estates behind Recreation Park, where driveway widths make a swinging gate impractical. A typical sliding gate install in Long Beach runs $2,400 to $6,200 depending on gate width, material, and whether we’re adding an operator or reusing an existing one. The job involves setting a new track on a level, compacted base, hanging the gate with rollers that match the load, and aligning everything so the gate glides without binding.
Marine-Grade Hardware Matters Here
Long Beach’s marine layer puts salt-laden moisture on everything, and sliding gate rollers, bearings, and track fasteners are the first things to corrode. We spec duplex stainless hinges and marine-grade bearings on Long Beach jobs that we wouldn’t need 15 miles inland in Downey. It costs more upfront and saves a slide gate from binding within three or four years.
When the Track or Post Footing Is the Real Problem
A sliding gate that sags or catches often traces back to a track bed that has settled or a post footing that was undersized from the start. We dig down far enough to see what we’re working with before we promise a fix. If the concrete base is cracked or the track is warped from years of salt exposure, we address that before hanging the new gate, and the written quote reflects it before any work begins.
Gate Opener Installation in Long Beach
Gate Opener Installation in Long Beach usually pairs with an existing gate that the homeowner wants automated for the first time, or an older operator that finally quit. A new gate opener install in Long Beach runs $1,350 to $3,400 for residential systems, including the operator, safety photocells, mounting hardware, and wiring. We’re factory-trained on the brands most Long Beach homes actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Underground Operators for Ornamental Gates
On high-end properties in Naples and along the Peninsula, homeowners don’t want a visible operator arm bolted to an ornamental iron gate. Underground operators solve this cleanly, but they’re more expensive and need proper drainage set into the footing or they flood in the first winter storm. We install them with sealed housings and tell you exactly what maintenance to expect.
Safety Photocells and Entrapment Protection
Every operator we install in Long Beach includes safety photocells and entrapment protection that meet current standards. If your gate can reverse and crush someone, it isn’t done. We test the reversal pressure with a force gauge before we leave, because a gate that closes on a kid or a dog is not something we’re willing to leave behind.
Trusted Brands We Service in Long Beach
We’re factory-trained on the brands families around Long Beach actually have on their gates. FAAC and BFT operators are common on Italian-made ornamental gates in Naples and along Bayshore Avenue, while Linear and Viking show up frequently on mid-century ranch homes in the Eastside and Los Altos. We keep common control boards, safety edges, and receiver modules stocked for Brooklyn Avenue and Atlantic Avenue customers, which means faster turnaround when a board fails and you don’t want to wait three weeks on a backorder. Our Gate Installation team spans residential and light commercial work throughout the city.
Common Gate Installation Problems We See in Long Beach Homes
- Original 1930s-1950s tubular-steel gates on failing posts. The gate panel is usually fine, but the post footing has rusted or shifted. We check the footing before quoting a new gate, because mounting a new panel to a dead post is a waste of your money. New galvanized post footings solve it for decades.
- Salt air eating hinges, welds, and operator hardware. The marine layer doesn’t just sit on Naples. It blankets most of Long Beach. Chrome and zinc plating fail here in a few years, not a decade, and we see bespoke swing gates seized mid-swing because a hinge pin corroded into place.
- Canal-front ornamental iron gates pitting at the welds. Naples properties on Rivo Alto Canal and Bayshore Avenue get a double hit: ocean salt air plus constant canal humidity. Welds pit, roller bearings eat themselves, and underground operators bind. Marine-grade bearings and duplex stainless hardware are not optional here.
- Port-adjacent slide gates on heavy duty cycles. In West Long Beach near the 710 and the port approaches, trucking yards and freight facilities run slide gates 300-500 open/close cycles per day. V-groove rollers flatten, bottom tracks warp, and consumer-grade operators burn out in months. That market needs commercial-duty hardware sourced differently than a Naples residential gate.
Pricing for Gate Installation in Long Beach, CA
Most residential gate installations in Long Beach fall between $1,450 and $6,800. A basic swing gate on an existing post starts near the low end. A custom-fabricated ornamental iron gate in Naples with marine-grade hardware, an underground operator, and matched intercom integration lands at the upper end or above. Materials, footing work, automation, and marine-hardware upgrades are the four things that move the number. You’ll see a written price before any work begins, every time, with no pressure to accept. Call (626) 649-4572 for a free measure and quote.
We Also Serve Cities Near Long Beach
Our Gate Installation in Long Beach service area extends to Signal Hill, Carson, Seal Beach, and Lakewood. We serve these communities with the same Cedarwell Care Promise: shoe covers, drop cloths, a written price first, and a cleanup photo before we leave.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Long Beach
Yes. We fabricate and install openers that match your existing ornamental gate’s swing or slide geometry, including underground operators when you don’t want a visible arm. We recently completed a 14-foot custom ornamental iron swing gate on Bayshore Avenue that tied into an existing DoorKing intercom and camera call station, and the operator runs silently now. Call (626) 649-4572 for a free site measure.
Yes, every automated gate we install in Long Beach includes safety photocells and entrapment protection that meets current standards. We test reversal pressure with a force gauge before leaving. A gate that can close on a child or a pet isn’t finished, and we don’t leave it that way.
The salt-laden marine layer that sits over Long Beach oxidizes control boards, limit switches, and motor housings significantly faster than inland cities like Downey or Norwalk. Chrome and zinc plating fails here within a few years, which means your operator’s internals corrode and short. Marine-grade enclosures and sealed housings extend life, and we spec them on Long Beach jobs as a default. Call (626) 649-4572 to get a written quote on an operator that’s built for this air.
Yes. We handle high-cycle commercial slide gates near the port, including V-groove roller replacement, heavy-duty track systems, and commercial-grade operators rated for 300-500 cycles a day. These jobs are priced differently than a residential gate call because the hardware and parts sourcing are commercial-duty, and we’ll give you a written price before anything is ordered. Call (626) 649-4572 to schedule a site walk.
We start with a site measure and a conversation about what the gate needs to do: match an existing architectural style, carry an intercom or camera, withstand salt air, or run on a high cycle count. Then we fabricate the gate to spec, set or reset post footings in marine-grade hardware where the location demands it, install the gate and any operator, and test everything before cleanup. You get a written price before fabrication starts. Call (626) 649-4572 to get yours.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Long Beach since 2009.