Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Yorba Linda, CA
Yorba Linda’s gate work leans on two very different skill sets: the wide pipe-rail ranch gates on equestrian parcels, and the ornamental iron driveway gates on custom hillside lots. A gate company serving Yorba Linda needs to see both in the same week, often the same day. That’s the kind of work Latch & Post Gate Repair does, with a written price before anything gets touched. Call us at (626) 649-4572 any hour, any day, and a live person will answer.
Why Yorba Linda Homes Are Different
The equestrian parcels here change the scope of gate work in ways Placentia and Brea rarely see. Wide-clearance pipe-rail ranch gates, typically 16 to 20 feet across and engineered for horse trailer passage, sit on heavy-duty post anchors that take real abuse. Many of these original steel pipe gates date to the 1970s, 1980s, and 1990s, which means rusted welds, heaved concrete footings, and hinge bolts corroded past saving are all routine findings.
Climate pushes on gates hard in Yorba Linda. Santa Ana winds move through this part of northeastern Orange County every fall and winter, regularly topping 60 mph, stressing hinges, snapping operator arms, and blowing large-panel swing gates off their travel stops. Summer highs of 100°F or more bake neoprene seals on gate operators and warp wooden infill panels faster than in coastal cities. Then there’s the soil: expansive clay in the hillside and eastern sections of Yorba Linda heaves seasonally, and posts set at a typical 36-inch depth lean within a few years. We set replacement posts at 48 inches or deeper with oversized concrete collars on parcels where the soil shifts.
HOA-gated communities with automated ornamental iron or aluminum gates also dot Yorba Linda, usually on private driveways in newer custom-build neighborhoods. That’s a third set of requirements: automation components, safety edges, and a cleaner visual standard than a ranch gate ever demands.
Our Main Yorba Linda Services
Most Yorba Linda calls to us fall into three categories, each with its own dedicated page and each priced the same way: a written quote before work begins, every time.
Gate Repair in Yorba Linda
A sagging ranch gate on a hillside equestrian parcel usually comes down to hinge wear or a post that’s begun to lean in the clay. In Yorba Linda, we often find heaved concrete footings and rusted welds on those 30-to-50-year-old pipe gates, and the fix involves trueing the post, not just rehanging the gate. We carry hinge kits, latch hardware, and post anchors sized for wide-clearance gates, and we always check the ground line where moisture collects. Learn more on our Gate Repair in Yorba Linda page.
Gate Installation in Yorba Linda
New gate installation in Yorba Linda needs to respect the soil before the gate ever goes on. We set posts at 48 inches or deeper on expansive clay hillside parcels, with concrete collars built to hold through wet winters and dry summers. Whether it’s a ranch gate for trailer passage or an ornamental iron gate on a custom lot, the plan includes the gate, the posts, the hinges, and the latch, written out line by line before we order anything. See the full scope on our Gate Installation in Yorba Linda page.
Electric Gate Repair in Yorba Linda
Santa Ana winds strain electric gate operators every year in Yorba Linda, snapping arms and knocking swing gates off their travel stops. We service the automation brands families around here actually own, and we check the whole system rather than replacing one part and walking away: operator, safety edges, keypad, wiring, and the gate’s own balance. If the wind pulled a large panel swing gate out of alignment, we correct that before the operator gets reset. Details at Electric Gate Repair in Yorba Linda.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Yorba Linda
We’re factory-trained on the gate and operator brands Yorba Linda homes actually use: Linear, Viking, Ghost Controls, and DoorKing among them. Common operator parts are stocked in our vans, so most repairs don’t wait on a second visit. See the full our brands list for what we work with.
Pricing for Gate Company in Yorba Linda, CA
| Service | Typical range in Yorba Linda |
|---|---|
| Standard gate-latch replacement | $85-$165 |
| Hinge replacement (pair, steel post gate) | $120-$210 |
| Gate post reset (single, includes concrete) | $220-$390 |
| Ranch gate re-hang (16-20 ft pipe rail) | $340-$620 |
| Operators for swing gates | $950-$2,400 |
| Keypad, photo eye, or safety-edge replacement | $190-$420 |
| Operator arm or limit-switch repair | $150-$290 |
| Full new ornamental iron gate (single swing) | $2,800-$7,500 |
| Full new ranch gate (16 ft pipe rail) | $1,900-$4,200 |
Hillside access, deep post work in clay soil, and wide ranch gates push Yorba Linda prices toward the upper end of these ranges. You’ll see the exact number in writing before we start, and the price we quote is the price you pay.
Neighborhoods We Serve in Yorba Linda
We take calls from across Yorba Linda, from the equestrian parcels off the eastern hillsides to the HOA communities on the custom lots. Most of the area can be reached within the same day, often within a few hours.
- East Yorba Linda (equestrian trail-adjacent parcels)
- Bryant Ranch
- Kerrigan Ranch
- Vista del Verde
- Yorba Linda Knolls
Service Area – Cities Near Yorba Linda
Our crews also cover the surrounding North Orange County area. If you’re in Placentia, CA, Fullerton, CA, Brea, CA, or Villa Park, CA, the same written-price promise and cleanup routine applies.
Serving Yorba Linda, CA - Our Local Coverage Area
We’re based in the Yorba Linda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Yorba Linda
Most Yorba Linda calls are reached same day, and a live person answers the phone around the clock to schedule it. Wind damage during Santa Ana season can fill the schedule fast, so calling early in the day helps.
Some HOA-gated communities in Yorba Linda require design review before replacement gates or operator changes, especially on ornamental iron entries. Check your CC&Rs before scheduling; we can work with whatever approval timeline your association requires.
Yes, that’s a major part of our Yorba Linda work. We re-hang wide pipe-rail gates, reset posts in clay soil at 48 inches or deeper, and size hinges and latches for horse trailer passage.
If your gate is leaning, dragging, or stuck, call (626) 649-4572. We’ll give you a straight answer and a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Yorba Linda Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick