Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Houston
Most gate installations in Houston come down to two things: the post holding the gate and the latch keeping it closed. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we’ve been focused on gates since 2009. When you call us about a new driveway gate in Katy or a pedestrian gate in The Heights, we show up with a written price before any work starts, shoe covers on inside your home, and drop cloths under every tool. Houston’s clay soil moves constantly, and that changes how a gate has to be set. Call (626) 649-4572 any hour and a live person answers.
Why Latch & Post Gate Repair Is Houston’s Preferred Gate Installation Company
Houston homeowners call us because we treat gate installation as a local job, not a generic one. A gate set plumb in Missouri City in May behaves differently than the same gate set in Pearland in October, because the black gumbo clay under both neighborhoods swells and shrinks on its own schedule. Cody Beckman leads our Houston team, and every technician who shows up is background-checked, uniformed, and trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Our customers in Katy, Sugar Land, and the Woodlands corridor keep telling us the same thing: other companies sent a quote over the phone and never walked the gate line. We don’t do that. We walk the post, check the plumb, look at the power situation, and then hand you a written number. Every installation is covered by our 365-Day Done Right Promise. If the gate isn’t right, we make it right, no argument and no fine print.
Gate Fabrication in Houston
Gate fabrication in Houston means building a gate to fit the opening you actually have, not the opening a catalog says you should have. Older homes in The Heights and Montrose often have wrought-iron pedestrian gates hanging on brick or wood posts that shifted decades ago. A prefabricated panel won’t square up on those openings. We measure the true opening, account for the post lean, and build the gate to that reality.
Custom Swing and Driveway Panels
A standard driveway gate in Houston’s newer subdivisions, built to a typical 12 to 16 foot opening, runs $2,400 to $5,800 depending on material and height. Pedestrian gates fall between $900 and $2,600. We build in steel or aluminum, and we choose corrosion-resistant hardware because Houston’s coastal humidity averages above 75% year-round. That’s not a detail, it’s the difference between a gate that opens in year one and a gate that opens in year eight.
Matching Existing Ornamental Iron
When we fabricate a replacement pedestrian gate in Montrose, we match the original scrollwork and picket spacing rather than swapping in a modern panel that clashes with the house. Cody Beckman reviews the fabrication drawings before anything is cut. You’ll see the price in writing before the metal is ordered, and we send a photo of the cleaned work area before we leave.
Automatic Gate Installation in Houston
Automatic gate installation in Houston usually starts with a problem the builder left behind: no conduit, no power drop, and a gate installed as a manual panel that was never intended to carry an operator. We see this constantly in Katy, Pearland, and Missouri City, where newer homes went up fast and the gate line got skipped. Adding a Viking or Ghost Controls operator to that gate means trenching a dedicated circuit and setting the post footing properly before the motor ever gets mounted.
Operator Retrofit on Manual Gates
A retrofit automatic gate installation in Houston typically runs $3,800 to $7,500, including the operator, the new power circuit, safety photocells, and a keypad or remote. If the gate post is leaning, we dig it out, reset it with a deeper footing, and re-plumb it before the rack and pinion goes on. Skipping that step is why builder-grade operators burn out in two years and the gate stops latching every fall.
New Operator on a Gate We Install
When we install the gate and the automation together, the price lands between $6,200 and $11,000 for a full sliding or swing gate with a DoorKing or Elite operator, conduit, wiring, and two remotes. The job takes a day or two depending on trenching. You’ll have a written price first, and the same 365-Day Done Right Promise applies to the whole system, not just the metal.
Trusted Brands We Service in Houston
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we keep common boards, remotes, photocells, and rack segments in our Houston service stock. That matters when a Viking control board floods after a Gulf storm and your gate won’t open. Instead of waiting a week for a part, we can often repair it the same day. Houston’s humidity is hard on operator mounting brackets and hinge hardware. We use sealed enclosures and corrosion-resistant hardware on every automatic installation, because the air here does more damage than the gate ever will.
Common Gate Installation Problems We See in Houston Homes
- Builder-grade operators on newer gates in Katy and Pearland: The gate went in as manual, the operator was added later, and no one corrected the footing. The motor burns out early because it’s fighting a post that moves every wet season.
- Missing conduit and power runs: Builders in Sugar Land and Missouri City frequently skip the rough-in at the gate line. Adding automation then requires trenching a new 120V circuit, and if the installer uses undersized wire, the loop detector becomes unreliable.
- Seasonal post lean from black gumbo clay: Houston’s soil swells after heavy rain and shrinks in dry spells. A swing gate set plumb in spring binds and sags by fall, and the panel gets blamed before anyone checks the post.
- Corrosion from near-coastal humidity and flooding: Roughly 50 inches of annual rain plus Gulf humidity above 75% accelerates rust on hinges, rollers, latches, and operator brackets. After Hurricane Harvey in 2017, we saw widespread control board and motor failures on submerged automatic gate systems across Houston.
Pricing for Gate Installation in Houston, TX
Here’s what we actually quote in Houston, as of this writing. A custom pedestrian gate runs $900 to $2,600. A standard driveway gate, fabricated and installed, lands between $2,400 and $5,800. Retrofitting an automatic operator onto an existing manual gate costs $3,800 to $7,500 including the new power circuit and safety photocells. A complete new automatic gate installation with operator, conduit, and two remotes runs $6,200 to $11,000. The price you get from us is the price you’ll pay, because we hand it to you in writing before any work begins. Call (626) 649-4572 for a free estimate at your Houston home.
We Also Serve Cities Near Houston
Our Houston team covers the surrounding communities as well. We handle Gate Installation in Galena Park, Pasadena, Channelview, and South Houston, along with the neighborhoods throughout the greater Houston metro. If you’re just outside the loop and wondering whether we’ll come out, call us and ask. We’ll tell you straight.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Houston
You’ll need a dedicated 120V power circuit trenched to the gate line, a concrete pad or deeper footing for the operator, a rack and pinion for a slide gate or an arm for a swing gate, safety photocells, and a keypad or remote. Most Sugar Land homes we see also need the post re-plumbed before the operator goes on, because the clay soil has moved it since the build. Full retrofit pricing runs $3,800 to $7,500. Call (626) 649-4572 and we’ll walk the gate line and hand you a written number.
It’s the post, not the latch. Houston’s black gumbo clay swells with rain and shrinks in dry spells, so a post set plumb in March can lean an inch or more by late August. That lean pulls the gate out of square and the latch misses. We reset and re-plumb the post with a deeper footing before replacing any hardware. Otherwise you’ll replace the latch every year and still have the same problem each fall.
Usually not. Builders in Missouri City and Pearland often install the gate as a manual panel and skip the conduit and power drop entirely. Adding automation later means trenching a new circuit, and if the installer runs undersized wire, the loop detector and keypad become unreliable. We trench and wire the circuit correctly on every automatic installation we do.
Houston’s humidity averages above 75% year-round and the city gets roughly 50 inches of annual rain. That constant moisture, combined with salt air near the Gulf, accelerates rust on iron and steel hinges, rollers, latches, and operator mounting brackets far faster than in inland Texas. We use aluminum or powder-coated steel where possible, and we always install sealed operator enclosures. If a gate component is going to fail in Houston, corrosion gets it before wear does.
Yes, and it happens in stages. When floodwater submerges the operator and control board, the board shorts immediately and the motor windings corrode internally over the following weeks. We saw a surge of full operator replacements across Houston after Harvey in 2017. Now, when we install an automatic gate in a flood-prone Houston neighborhood, we mount the operator and control board above the known high-water line where the site allows it. If your gate went underwater, call (626) 649-4572 and we’ll diagnose it the same day.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Houston since 2009.