Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Holiday
Gate installation in Holiday usually costs between $1,400 and $4,800 for a manual swing or slide gate, and $3,200 to $9,500 when you add an electric operator like LiftMaster or Ghost Controls. Most Holiday jobs take one to three days once materials arrive, depending on whether we’re replacing an old gate on existing posts or setting new footers. We’re Latch & Post Gate Repair, part of the Cedarwell family of gate specialists, and we work in Holiday’s manufactured home parks and ranch-house neighborhoods every week. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Holiday’s Preferred Gate Installation Company
We know the difference between a gate that works in Holiday and a gate that works somewhere else. Holiday’s lots sit close together, the soil holds water, and the Gulf air eats unprotected steel. Our technicians are background-checked and uniformed, factory-trained on Linear, Viking, DoorKing and Ghost Controls, and they follow the Cedarwell C.A.R.E. values on every visit: clean up like it’s our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work. That means shoe covers and drop cloths before we step inside, a cleanup photo before we leave, and quiet tools when kids are napping.
Cody Beckman leads our gate installation work, and he’s particular about footers. In Holiday, that matters more than almost anywhere else in Pasco County. We’ve pulled out old 1970s concrete blocks that crumbled in our hands, with no rebar and decades of ground-moisture cycling behind them. A gate quote that skips a footer inspection here isn’t honest. Ours never does.
Gate Installation Services in Holiday
Gate Installation Services in Holiday start with a free site visit where we measure the opening, check the ground, and look at what’s already there. We install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates on shared community entrances and single-family lots. Every written price is delivered before any work starts, and the number we quote is the number you pay.
Driveway and Security Gates
Most Holiday driveways are narrow, and many lead into shared rights of way. A slide gate often fits where a swing gate won’t clear a neighbor’s fence or the street edge. We install both, and we’ll tell you straight if the gate you’re picturing won’t work on your lot.
Pedestrian and Double Gates
Pedestrian gates in Holiday’s manufactured home parks usually replace corroded 1970s chain-link or aluminum originals. Double gates for wider shared entrances often come down to the posts, not the panels. We check both before quoting.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Holiday
Electric Gate Installation in Holiday means more than hanging a motor on a post. The flat, poorly drained lots around neighborhoods off Darby Lane and Moog Road flood in summer thunderstorms, and a ground-level operator can drown overnight. We set control boards on raised pads, seal enclosures against salt air, and run conduit that survives the water table here. A full electric gate installation with operator, safety edges, and keypad runs $3,200 to $9,500 in Holiday, with the written price confirmed before we order anything.
Operators and Control Boards
We install and wire LiftMaster and DoorKing operators on new and existing gates. When a board fails from water intrusion or Gulf corrosion, we replace and relocate it so the same short doesn’t happen again next rainy season.
Safety Edges and Photoelectric Sensors
Every electric gate in Holiday has to meet UL 325 safety standards. That means photoelectric sensors and reversing edges that work. We test every new install with a load at the closing edge and show you the test before we leave.
Trusted Brands We Service in Holiday
We’re factory-trained on the brands families in Holiday actually own. Linear and Viking swing and slide operators are common across the area’s older parks. Ghost Controls and DoorKing show up on newer ranch-house installs. Because we focus on gate work and nothing else, we keep common Holiday parts on our trucks, so a replacement board or hinge set doesn’t mean a two-week wait. When a specific gauge or hole pattern from a 1980s aluminum gate has been out of production for years, we fabricate the replacement locally instead of rigging a mismatch.
Common Gate Installation Problems We See in Holiday Homes
- Cracked unrebarred footers from the 1970s. Many of Holiday’s manufactured home park entrance gates were set on concrete poured without rebar. After 40-plus years of ground-moisture cycling, those blocks crack and shift, throwing the gate frame out of square. A new gate on a bad footer fails within a season or two.
- Swing gates blocking shared driveways. Tight lot lines and rights of way in Holiday’s older communities often leave no room for a swing gate’s arc. When that’s the case, a slide gate is the only gate that keeps access open for neighbors and emergency vehicles.
- Salt-air corrosion on hinges and operators. Holiday sits a few miles from the Gulf of Mexico. Hinge pintles, closer springs, and operator control boards rust through far faster than inland Pasco County locations. A steel frame that might last 15 years in Zephyrhills can show through-rust here in 7 or 8.
- Flooded ground-level operators. Flat lots and summer thunderstorms mean standing water around gate posts and motors. We raise operators onto pads and route wiring so the control board stays dry even when the yard doesn’t.
Pricing for Gate Installation in Holiday, FL
Manual gate installation in Holiday runs $1,400 to $4,800, and electric gate installation runs $3,200 to $9,500. A new slide gate with a LiftMaster operator at a shared park entrance off Darby Lane or a street like Bonita Road typically lands in the $5,000 to $8,000 range. The big mover is the footer: if we’re pulling out a cracked, unrebarred 1970s block and pouring a deeper post footing, that adds real labor and material cost, but it’s what keeps the gate square. Smaller jobs cost less. A basic pedestal gate on a sound post can run under $2,000. We give a free measure and written estimate before any work begins, and that number doesn’t change without us talking to you first. Call (626) 649-4572 to schedule the visit.
We Also Serve Cities Near Holiday
Our Gate Installation work covers Holiday and the surrounding communities of Elfers, New Port Richey, Tarpon Springs, and Palm Harbor. If you’re on the edge of Holiday or in a neighboring town, our crews can often reach you the same week. See Gate Installation in Holiday for the full picture of what we do here.
Serving Holiday, FL - Our Local Coverage Area
We’re based in the Holiday area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Holiday
Because Holiday’s older manufactured home parks were laid out with tight rights of way and closely spaced lots, a swing gate’s arc often swings into a neighbor’s driveway or blocks the shared street. A slide gate runs parallel to the fence line and keeps the full opening clear. When the existing swing gate can’t clear the right-of-way, we recommend a slide gate and quote it as the realistic fix. For a specific answer on your entrance, call (626) 649-4572 and we’ll measure it.
Usually yes. Many Holiday footer blocks from the 1970s were poured without rebar and have cracked from decades of ground-moisture cycling. If the footer is cracked or shifting, we cut it out, pour a deeper post footing, and set the new post straight. If the existing footer is sound, we may be able to reuse it and save you money. We inspect it before quoting either way.
All of Holiday is close enough to the Gulf of Mexico that unprotected steel and aluminum hardware corrodes noticeably faster than inland Pasco County. Hinge pintles and closer springs that would last a decade in Zephyrhills can fail in 7 or 8 years here. We use sealed bearings, powder-coated or galvanized posts, and marine-grade hardware where the budget allows, and we’ll tell you plainly which parts will need replacement sooner.
Yes, when installed correctly. UL 325 requires photoelectric sensors and a reversing edge or equivalent safety device, plus proper wiring and grounding. We test every new operator with a real obstruction before we leave and show you the result. If you’re replacing an older operator that predates current safety standards, we’ll bring the whole gate up to code as part of the install.
Yes, and we do it regularly. For shared entrances, we stage the work in phases and set a temporary pedestrian path around the excavation so residents and emergency vehicles can still get through. We used this approach installing a slide gate with a LiftMaster operator at a 55-plus community entrance off Darby Lane, where the driveway had to stay open the whole time. The install took a little longer, but no one lost access.
Call (626) 649-4572 for a free estimate on gate installation in Holiday. A live person answers, and we’ll confirm a time that works around your family, your pets, and the gate you actually need.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Holiday since 2009.