Gate Installation in Hicksville - Free On-Site Survey, Written Price

Fast, Reliable Gate Installation Across Hicksville

A new gate installation in Hicksville typically runs between $1,800 and $6,500 for most residential jobs, and the work usually takes one full day on site. That price covers the post setting, the gate itself, hardware, and a written quote you approve before we order anything. If you’re in a Levitt-era Cape Cod off Broadway or a split-level near the LIRR tracks, you already know the old galvanized stock is tired. We’re a Cedarwell-family gate specialist, and when you call us at (626) 649-4572, a live person answers. No voicemail tree, no callback queue.

Call (626) 649-4572

Why Latch & Post Gate Repair Is Hicksville’s Preferred Gate Installation Company

Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. We don’t trim hedges, hang gutters, or pour patios. We install, repair, and automate gates, and we’ve been doing it since 2009 as part of the Cedarwell family of independently owned and operated gate specialists.

Around Hicksville, homeowners see a crew that shows up in uniform, lays drop cloths on the floor, and puts on shoe covers before stepping inside. We ask before we move anything, and when the work is done, we take a photo of the cleanup before we leave. Your floors stay clean, your kids’ toys stay put, and your pet isn’t sniffing metal shavings. That’s the Cedarwell C.A.R.E. routine, and it’s included on every visit, not an upgrade.

Cody Beckman leads our team, and he’s particular about three things: written prices before any work starts, background-checked technicians, and quiet tools when a baby is napping. If the installation isn’t right a month or a year from now, the 365-Day Done Right Promise applies. No argument, no fine print.

Automatic Gate Installation in Hicksville

Automatic gate installation in Hicksville usually means retrofitting a motor, control board, safety devices, and entry keypad onto an existing gate or including them with a new one from the start. Most automated driveway gates here run $2,200 to $5,800, depending on whether we’re reusing the existing post or setting a new one in a concrete bell footing. The operator itself is one line item. The bigger cost is making sure a gate that swung free by hand for decades now closes safely and predictably under power every single time.

Hicksville’s tight 40 to 60 foot lots mean swing gates are far more common than sliders. There simply isn’t the side yard for a rolling gate to track along. That changes what we recommend. A swing operator on a double gate off a split-level near Levittown’s border needs a different arm geometry and a stronger hinge post than a single pedestrian gate on a Cape Cod. We spec that before ordering anything.

Retrofit vs. New Automaton

If your existing gate frame is sound and the post is set deep in concrete, a retrofit is usually the cheaper path. We mount the operator, run low-voltage wiring or a solar panel, and add the photocell and keypad. But on Hicksville’s 60 to 75 year old galvanized stock, “sound” is rare. When the post is rusted at the ground line or the hinge welds are gone, we tell you straight: automating a dying frame is money you’ll spend twice.

Safety Sensors and UL 325

Any new automated gate in Hicksville must meet UL 325 entrapment protection. That means photo-eyes and, on many driveway gates, a pressure edge or contact sensor. We install them as standard. It’s not an add-on. It’s the law, and it’s what keeps a child or a pet from getting caught in a closing gate.

Gate Installation Services in Hicksville

Gate installation services in Hicksville span everything from replacing a rusted chain-link pedestrian gate off a ranch home to hanging a new ornamental aluminum driveway gate on a Cape Cod. A basic pedestrian gate install runs $800 to $1,900 including a new pressure-treated or steel post. A full driveway swing gate with a new post, frame, and hardware typically lands between $2,800 and $5,800 before automation. You’ll see the exact number in writing before we touch anything.

One thing we see a lot here: homeowners who want a double gate at the driveway but have one good post and one rotted one. We don’t hang a new gate on a bad post. We dig it out, set a new post in a bell footing below the frost line, and let it cure before the gate goes on. That step adds a day in some cases but it’s the difference between a gate that works for 20 years and one that sags by spring.

Driveway, Pedestrian, and Security Gates

Driveway gates dominate here because nearly every Hicksville property has a rear or side vehicle entrance. We install sliding gates where the lot allows, but swing gates are the default. Pedestrian gates between the front and back yard are smaller jobs, often handled in a morning. Security gates, often with an intercom or keypad, are a growing request from homeowners who want a physical barrier between the street and a side entrance.

Double Gate and Swing Gate Setup

Double gates put the most stress on hardware, especially when one leaf sags and the other doesn’t. We align the leaves, set the drop rods and cane bolts, and use adjustable hinges so each leaf carries its own weight. A properly set double gate latches cleanly with one hand. A bad one fights you every morning. Most double driveway gate installs in Hicksville run $3,200 to $6,000 with a new center post.

Trusted Brands We Service in Hicksville

We’re factory-trained on the brands families around here actually own, including Viking, Ghost Controls, and DoorKing. That matters in Hicksville because the 2000s wave of ornamental driveway gates came with a real mix of operators, and a lot of them are now 10 to 15 years old. When a Ghost Controls board fails on a gate near Cantiague Park, we don’t guess at the wiring. We stock common parts in our metro office and can usually get a replacement board or arm to your street without waiting a week on a distributor.

Common Gate Installation Problems We See in Hicksville Homes

• Ground-line rust on Levitt-era posts. The original 1950s galvanized steel posts were set shallow, and decades of Nassau County road salt and coastal humidity have eaten through them at the soil line. Hinge repairs on a post like that fail within a season. The post has to come out.
• Heaved footings from freeze-thaw. Nor’easters bring hard freezes that push shallow concrete footings upward. The post leans, the gate binds, and the latch misses. We re-set posts below the frost line in a bell footing so winter doesn’t change the geometry.
• Undersized posts on 2000s wrought-iron gates. Many ornamental driveway gates installed by general fencing contractors used 2-inch posts with no concrete bell. Ten to fifteen years later they sag and the hinge welds strip. The gate itself often looks fine; the post is the problem.
• Operator-less setups being asked to do too much. A 70-year-old chain-link gate that was never designed for automation gets a motor bolted on. The frame flexes, the operator strains, and safety sensors trip constantly. We’re honest about when a full frame replacement is the cheaper answer.

Pricing for Gate Installation in Hicksville, NY

We Also Serve Cities Near Hicksville

Our Gate Installation team covers the surrounding Nassau communities, including Levittown, Hempstead, Freeport, and Long Beach. If you’re just outside Hicksville, the same pricing, the same C.A.R.E. routine, and the same live-person phone line applies. You can read more about our local work on our Gate Installation in Hicksville page, or call directly for a free estimate.

FAQs About Gate Installation in Hicksville