Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fontana
Gate installation in Fontana usually means one of two jobs: hanging a new gate on an existing block wall, or replacing a bent, wind-damaged frame that a Cajon Pass Santa Ana event took apart. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we’ve been installing driveway and pedestrian gates in Fontana long enough to know the difference between a gate you can straighten and one that’s cheaper to replace. Most Fontana installations run $900-$3,400 depending on gate type, operator, and post work, and you’ll see the exact number in writing before we touch anything. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Fontana’s Preferred Gate Installation Company
Fontana homeowners call us because we show up with a plan they can read. Every job starts with a fixed, written price, not a range that grows. Our technicians are background-checked and uniformed, and they bring shoe covers and drop cloths inside the house without being asked. When they leave, you get a photo of the cleaned-up work area. That’s the Cedarwell Care Promise, and it’s included on every visit.
Scheduling and dispatch for Fontana jobs are coordinated from our Inland Empire office, so we’re familiar with the neighborhoods, the HOA rules, and the gate failures that repeat across the city. Cody Beckman, who leads our team, has walked enough Fontana driveways to know when a corroded hinge pin is worth replacing and when the post itself needs to come out. The 365-Day Done Right Promise backs every installation. If the gate isn’t right, we make it right. No argument.
Our Gate Installation team handles everything from a simple pedestrian gate off Juniper Avenue to a double swing driveway gate in a gated Rancho Cucamonga-adjacent community. We answer the phone live, 24/7, so you’re not leaving a message when you’re staring at a gate that won’t close.
Driveway Gate Installation in Fontana
Gate Installation of the driveway variety in Fontana typically runs $1,600-$3,400 for a new automatic swing gate hung on an existing block wall, including a current LiftMaster or Viking operator, two remotes, and safety photocells. If the post footing needs to be dug deeper, add $300-$600. The big variable in Fontana is wind. A lightweight wrought iron frame that would hold fine in Pomona can fold under a January Santa Ana event here, which is why we spec heavier posts and deeper footings than the original 1980s builders did.
Full replacement vs. retrofitting the old frame
Some Fontana driveway gates are 35 years old and still square. Others are racked, rust-scaled at the welds, and carrying a dead operator. When the frame is straight and only the opener failed, retrofitting a modern operator with new photocells often makes sense. When the frame is bent or the hinge post has pulled loose in the soil, replacement is usually the cheaper answer once you factor in straightening, weld repair, and a new board and motor.
Working with Fontana HOAs
Most Fontana tracts built in the 1980s and 1990s have HOA design standards for gates: height, color, and style. We’ve installed gates in enough of these subdivisions to know what typically gets approved, and we can help you match the neighbor’s gate profile so the HOA doesn’t flag it.
Sliding Gate Installation in Fontana
Sliding gate installation in Fontana is common where the driveway slopes up from the street or where the setback is too tight for a swing arc. A residential slide gate with a current Viking or DoorKing operator runs $1,800-$3,800, depending on length and whether we’re welding a new steel frame or assembling a pre-fabricated one. The slide track and the gate wheels take real abuse here because of wind-blown sand and dust from the Cajon Pass, so we always recommend sealed bearing wheels and a track with proper drainage.
Residential slide gates
A single-family slide gate in Fontana usually means a steel or aluminum frame with welded infill, a track set into or onto the concrete driveway, and a belt-drive operator. We watch for the same thing every time: the track has to be dead level, or the gate will bind and chew through motors twice as fast.
Heavy-use and commercial slide gates
Fontana’s logistics corridors along the I-10 and I-15 run enormous truck volume. Our techs who work those industrial accounts often keep a spare slide gate motor on the truck because a warehouse gate cycling 200-300 times a day will wear out a residential motor quickly. We install and service those heavier slide gates too, with operators built for the duty cycle.
Trusted Brands We Service in Fontana
We’re factory-trained on the gate openers Fontana homes actually carry: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The old Vikings and early LiftMasters that came with 1980s and 1990s HOA tract homes in Fontana are particularly common, and we keep parts for those aging boards and drive gears on hand. If your gate opener is a Linear or a Ghost Controls unit that’s suddenly dead, we can diagnose it honestly: repair if the cost makes sense, replace if it doesn’t.
Common Gate Installation Problems We See in Fontana Homes
- Wind-racked frames from Cajon Pass Santa Ana events. The same storm that just makes a gate noisy in Rialto or Ontario can bend a lightweight wrought iron frame in Fontana and lift the hinge post off its footing. Straightening alone won’t hold; the frame and post usually need replacement together.
- Dead 1980s and 1990s control boards. Original Viking, Elite, and early LiftMaster operators are now 25-40 years old across Fontana’s HOA tracts. Boards fail in waves because entire subdivisions were built to one spec, and they all age at the same rate.
- Corroded hinge pins and rust-scaled welds. Fontana’s 105°F+ summers and hard San Bernardino Basin water accelerate rust scaling on wrought iron. We see frozen hinge pins and pitted post welds on gates that otherwise look fine.
- Undersized post footings. Many original Fontana gate posts were set shallow, often with too little concrete for a modern automatic operator. A new operator on a weak post will wallow and sag, so we dig deeper and set a proper footing before hanging the gate.
Pricing for Gate Installation in Fontana, CA
A pedestrian gate installation in Fontana typically runs $600-$1,300. A single swing driveway gate with a new operator runs $1,600-$3,400. A slide gate runs $1,800-$3,800. Double gates and long driveway runs push toward $5,000, and that’s before any custom ironwork. Post replacement adds $300-$700 depending on depth and soil. The price you’ll pay is the price we write down before work begins. Call (626) 649-4572 for a free estimate and you’ll have a number in writing, not a guess.
We Also Serve Cities Near Fontana
Our crews serve Fontana and the surrounding communities: Bloomington, Rialto, Rancho Cucamonga, and Riverside. If you’re west of Sierra Lakes Parkway or south of the I-10, we’re close. The same written-price promise and the same cleanup standard apply, no matter which side of the city line you’re on.
Serving Fontana, CA - Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Fontana
Replace the opener and board if the frame is straight and the post is solid, which runs $800-$1,400 in Fontana; replace the whole gate and operator if the frame is racked or the post has moved, which runs $1,600-$3,800. On a block of 1980s tract homes off Sierra Lakes Parkway, we replaced a bent wrought iron swing gate whose original Viking opener had died twice and whose hinge post had pulled loose in the soil after a January wind event. The repair math said replacement: straightening the old frame plus a new board and motor would have cost more than a new hung gate and operator. Call (626) 649-4572 and we’ll give you the honest answer for your gate.
Because Fontana sits at the mouth of Cajon Pass, where Santa Ana wind events get funneled and amplified. The same storm that only rattles a gate in Rialto or Ontario can bend a Fontana frame, snap a weld, or lift a hinge off its post footing. Add the city’s stock of 1980s-1990s HOA tract sub-divisions with original operators now 25-40 years old, and Fontana sees wind damage and aging-infrastructure failures hitting at the same time.
Usually yes, if the CMU block wall is sound and the hinge post isn’t leaning or rust-jacked. In Fontana we check the post footing first, because many original posts were set too shallow for a modern automatic operator. If the post is solid, we can hang a new gate on it and add the operator, photocells, and remotes in one day.
Yes. Current safety standards require at least one monitored entrapment protection device, and any automatic gate we install in Fontana gets photocells as a minimum, with edge sensors added where kids or pets are present. We set the closing force low and test the reverse function before we call the job done.
Yes. The Amazon, UPS, and third-party logistics campuses along the I-10 and I-15 corridors run slide gates 200-300 cycles a day, and we install and service those heavy-use gates with operators built for that duty cycle. Our techs who handle industrial work in Fontana often keep spare slide gate motors on the truck because those accounts call multiple times a year.
Call Latch & Post Gate Repair in Fontana
If your Fontana gate is sagging, bent, or running on a dead operator, call (626) 649-4572. We’ll give you a written price before any work starts, show up with shoe covers and drop cloths, and send a photo of the clean-up when we’re done. And if the gate isn’t right a month from now or a year from now, the 365-Day Done Right Promise still applies. Cody Beckman and our Fontana crew will make it right.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family of independently owned and operated gate specialists.