Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bulverde
Gate installation in Bulverde falls into two camps: new ornamental gates for the master-planned communities like Ventana and Johnson Ranch, and retrofit work on older acreage gates that have been shifting on Edwards Plateau limestone for years. Most Bulverde jobs we quote run from $1,800 for a basic single swing gate to $9,000+ for a fabricated double driveway gate with automation. We serve every part of Bulverde, from the HOA neighborhoods off 281 to the 5 and 20 acre tracts along FM 1863 and Cougar Bend. Call (626) 649-4572 and you’ll talk to a live person, day or night.
Why Latch & Post Gate Repair Is Bulverde’s Preferred Gate Installation Company
We’re a Cedarwell-family gate specialist, which means gate installation is the whole job, not a side service. Bulverde homeowners keep calling us back for one reason: we write the price down before we touch anything, and we honor it. No invoice surprises after the post holes are dug.
Our technicians show up in uniform, background-checked, and factory-trained on the brands Bulverde homes actually use: DoorKing, Ghost Controls, Viking, and Elite among them. When we walk through your house to reach a keypad or control box, shoe covers go on and drop cloths come out. We photograph the clean-up before we leave. That’s the Cedarwell C.A.R.E. routine, and it’s not an upsell. It’s just how we work.
Cody Beckman, who runs our gate installation team, has seen every post-heave and operator-bind failure this Hill Country soil can produce. That local knowledge means we diagnose the actual cause before we quote a fix. You’ll know exactly what you’re paying for and why. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the crews working on your Bulverde gate live and work in this area.
Gate Fabrication in Bulverde
Gate fabrication in Bulverde is what happens when a homeowner needs a gate built to a specific opening, a specific HOA spec, or a specific look. Deed-restricted communities around Bulverde like Ventana and Johnson Ranch often mandate ornamental wrought iron or aluminum driveway gates with keypads or intercom systems. Older rural properties along FM 1863 have heavy steel ranch gates on pipe or wooden posts. If your opening is an odd width, a custom fabrication is the only way to get a gate that actually fits and swings properly.
Custom Driveway Gate Builds
Most custom driveway gates in Bulverde run $2,400 to $7,000 depending on width, material, and whether you want arched tops, decorative finials, or privacy paneling. We measure the opening, check the post footings, and give you a written price before any fabrication starts. Aluminum holds up better than raw steel in Bulverde’s summer heat – steel expands and can bind if clearances are too tight.
Pedestrian Gate Fabrication
A fabricated pedestrian gate runs $900 to $2,800 in Bulverde. These smaller gates often pair with a driveway gate or stand alone next to the house. We match the style and finish to what’s already on the property, and we set the latch height for kids and keep the gap clearances tight so small dogs can’t squeeze through.
Automatic Gate Installation in Bulverde
Automatic gate installation in Bulverde means adding an opener, keypad, intercom, or full access system to a driveway or pedestrian gate, and on rural acreage that often involves retrofitting modern equipment onto an older gate. The operators Bulverde homeowners trust most are DoorKing, Ghost Controls, Viking, and Elite, and we stock common parts for these locally so your repair doesn’t wait on a slow shipment. A complete automatic gate installation, including the operator, safety photocells, and a keypad, typically runs $3,500 to $9,000 depending on the gate’s weight and length.
Keypad and Intercom Entry Systems
Bulverde homes with keypad or intercom entry often have guests, deliveries, or ranch traffic that needs managed access. We install wired and wireless keypads, phone-based intercom systems, and vehicle detection loops. A keypad entry add-on runs $450 to $1,200; a full intercom with remote app control runs $1,800 to $4,500. The price always comes in writing before we start.
Safety Photocells and Vehicle Detection
Safety photocells are non-negotiable on any automatic gate we install or retrofit in Bulverde. In this area, mountain cedar pollen from December through February clogs photoeye lenses and motor vents at unusually high rates, causing intermittent faults that look like board failures. We’ve seen this dozens of times. A good installation includes sealing the sensor housings so pollen can’t accumulate, and we check this on every automatic gate install.
Trusted Brands We Service in Bulverde
We’re factory-trained on the equipment Bulverde homes already have: DoorKing, Ghost Controls, Viking, and Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. If your gate opener was installed years ago and the control board has failed, we can often retrofit a new board or operator onto the existing gate structure rather than replacing the whole system. That’s especially relevant on older Bulverde acreage gates where the posts and hinges are still solid. We keep common boards, remotes, and photocells for these brands on hand for Bulverde customers, which means less waiting when a gate goes down.
Common Gate Installation Problems We See in Bulverde Homes
- Post heave and tilt from caliche clay. The Edwards Plateau clay expands and contracts with moisture, and gate posts set in shallow concrete pads shift with it. We see hinge posts leaning 2 to 4 degrees, which makes the gate bind against the operator even though the motor is fine.
- Shallow original post pads on limestone ledge. On acreage tracts off Smithson Valley Road and Cougar Bend, limestone ledge often sits just 8 to 14 inches below grade. Original installers hit rock, stopped digging, and set posts in pads too shallow to hold. Those posts drift and loosen seasonally, which is a foundation problem rather than a mechanical problem.
- Ashe juniper pollen clogging safety photocells. Mountain cedar season peaks from December through February in Bulverde, and we get a wave of automatic gate calls where the safety photocell trips constantly. The boards are usually fine; the sensors need cleaning and better sealing.
- Warped aluminum frames from summer heat. Bulverde regularly passes 100°F in summer, and aluminum gates that were installed with tight clearances warp just enough to rub. We account for heat expansion when we fabricate and set new gates, leaving clearances that still look tight but don’t bind in July.
Pricing for Gate Installation in Bulverde, TX
Gate installation in Bulverde runs a wide range because the area spans HOA-spec ornamental gates in new neighborhoods and legacy ranch gates on larger acreage. A standard single swing gate installation runs $1,800 to $3,800. A double gate runs $3,000 to $6,500. A custom fabricated gate with automation, keypad entry, and safety photocells can reach $9,000 or more. What matters most is what you’ll see in the written quote before any work begins. No surprises after the fact. Call (626) 649-4572 for a free estimate on your specific gate, and we’ll give you the exact number for your opening, your posts, and your operator, all itemized.
We Also Serve Cities Near Bulverde
Our Gate Installation team covers the communities around Bulverde, including Canyon Lake, Schertz, Universal City, and Cibolo. If you’re just outside Bulverde on acreage or in a newer subdivision nearby, the same technicians, the same written pricing, and the same 365-Day Done Right Promise apply. We schedule across this entire corridor, and we quote the same way everywhere.
Serving Bulverde, TX - Our Local Coverage Area
We’re based in the Bulverde area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Bulverde
In most Bulverde homes we can retrofit a new operator onto the existing gate, and it’s almost always cheaper than full gate installation. The key question is whether the posts and hinges are still solid. If the hinge post is tilting from caliche clay movement, a new operator won’t fix the bind; you’ll need a post-reset first. If the post is straight and the gate swings freely by hand, a modern operator from DoorKing, Ghost Controls, or Viking can usually be mounted and the safety photocells updated for $1,800 to $4,500. Call (626) 649-4572 and we’ll tell you which path makes sense for your gate.
It’s the mountain cedar pollen, which peaks in Bulverde from December through February. The pollen coats photoeye lenses and the fine dust works into motor vents, blocking the beam and causing intermittent safety faults. The boards and the photocells are usually functioning correctly. We clean the sensors, seal the housings against future pollen, and test the alignment. If we’re doing an automatic gate installation, we seal everything at install so this doesn’t become a seasonal problem.
Only if the post is set the same shallow way. On acreage along Smithson Valley Road and Cougar Bend, limestone ledge often sits 8 to 14 inches below grade. When original installers hit rock and set posts in shallow pads, the Edwards Plateau clay shifts and the posts lean over time. On a new gate installation we excavate to the ledge, drill and pin where needed, and convert to a base-plate anchor or a deep-set post with proper drainage. That means the new gate starts square and stays square. We’ve reset dozens of these posts in Bulverde, including a Ventana property where a LiftMaster operator was binding because the hinge post had tilted about 3 degrees from seasonal caliche movement.
In Bulverde it’s usually the hinge post, not the panel. The post sits in expansive caliche clay, heaves slightly each wet season, and the gate loses its original swing plane. Double gates start to sag in the middle where the two leaves meet. We check the post with a level, and if it’s leaning, the fix is a post-reset or base-plate anchor conversion, not a new gate panel. If the post is straight and the sag is in the gate frame itself, a truss rod or re-welded frame usually solves it for $300 to $800.
We install and service DoorKing, Ghost Controls, Viking, and Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. On Bulverde homes with keypad entry or intercom systems, DoorKing and Ghost Controls are the two we see most often on driveway gates. We stock common boards, remotes, and photocells for both, which speeds up repairs. A new keypad add-on runs $450 to $1,200, and a full intercom with phone app runs $1,800 to $4,500. Your written quote will name the exact brand and model we’ll install.
Get a Written Quote for Gate Installation in Bulverde
Before you commit to any gate installation in Bulverde, get a written price. We quote the work, including materials, labor, post work, and automation, before anything starts. No pressure, no invoice surprises. We’ll put shoe covers on when we come inside, drop cloths down where we work, and photograph the clean-up before we leave. The 365-Day Done Right Promise covers every installation we do. Call (626) 649-4572 now, and a live person will answer – even if it’s the middle of the night and your gate won’t open.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Bulverde and the surrounding Hill Country since 2009.