Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Brentwood
A new driveway gate or community entrance gate in Brentwood typically runs between $1,800 and $7,500 installed, with electric automation adding $1,400 to $3,200 depending on the operator and power run. Most installations we schedule in Brentwood are quoted within 24 hours and completed within one to three weeks, once you approve the written price. We know the Fairview, Trilogy, and Garin Ranch neighborhoods well, along with the older ranch-property gates off Balfour Road and the newer HOA communities south of Balfour. If you’re weighing a gate replacement or adding automation to a manual gate, call (626) 649-4572 and we’ll walk you through what your specific setup will involve before you commit to anything.
Why Latch & Post Gate Repair Is Brentwood’s Preferred Gate Installation Company
We’re a gate specialist, not a general handyman. That distinction matters in Brentwood because so many of the gates here share the same mid-2000s operator hardware and the same installation shortcuts. Our Gate Installation team has pulled apart enough Linear and Viking operators from Trilogy, Garin Ranch, and the communities along Lone Tree Way to know, before opening the cabinet, what board revision is inside and which worm gear has been wearing since the Bush administration.
Every installation we do in Brentwood starts with a written price. You’ll see the number for the gate, the operator, the trenching if any, and the post work before we touch a single bolt. Our technicians wear shoe covers and lay drop cloths wherever they walk inside your property, and you’ll get a photo of the clean job site before we leave. That’s the Cedarwell C.A.R.E. routine on every visit: clean up like it’s our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work.
Brentwood homeowners consistently mention two things after we finish: the gate works the way the builder should have made it work, and the crew left the driveway cleaner than they found it. Led by Cody Beckman, our local team answers the phone around the clock, seven days a week. No voicemail queue. A live person picks up.
Gate Installation Services in Brentwood
Gate Installation Services in Brentwood covers everything from replacing a sagging ornamental iron swing gate to building a new double driveway gate from scratch. Most Brentwood homes we visit were built between 1990 and 2010, and the gates from that era are now at the point where hinge posts lean, wooden frames warp in the summer heat, and operator arms strain under Delta-breeze wind loading. A standard single swing gate installation in Brentwood runs $1,800 to $4,000. A double gate or a slide gate runs $3,500 to $7,500, depending on the linear footage and whether we’re replacing the post footings.
We quote the full number before any work starts. That number includes the gate, the hinges, the post work, the hardware, and the labor. It does not include surprises.
Driveway and Pedestrian Gates
A new driveway gate in Brentwood usually means an ornamental iron swing gate or a rolling slide gate, and the decision between them often comes down to your driveway slope and how much set-back room you have from the street. Pedestrian gates are simpler but still need a properly set post with concrete footing that reaches below our local clay soil’s shrink-swell zone. We pour deeper footings on every post in Brentwood because shallow footings are exactly why so many builder-installed gates lean.
Swing, Double, and Security Gates
Swing gates remain the most common style in Brentwood’s master-planned communities, and double swing gates are standard for wider driveways in the newer subdivisions off Sand Creek Road. We also install security gates for side yards, RV access, and pool equipment enclosures. Each one gets the same written price, the same shoe-cover routine, and the same 365-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Brentwood
Electric Gate Installation in Brentwood means adding an automated operator to a new or existing gate, and it almost always means addressing the power supply and conduit situation first. In most Brentwood HOAs built during the 2000s boom, the gate posts went in without conduit runs and without a dedicated low-voltage path for loop detectors or photocells. So when we automate a manual gate here, the job usually includes trenching a new power run, pouring a deeper operator post or hinge post footing, and adding UL 325 entrapment protection that the original install skipped. A full electric gate automation in Brentwood runs $3,200 to $7,500 including the operator, the power work, and the safety sensors.
We never start an electric gate job without a written price for the entire scope. You’ll approve the trenching depth, the operator model, and the sensor placement before we dig.
Adding Automation to a Manual Gate
Plenty of Brentwood homes have a perfectly good ornamental iron gate that was installed manual in 2005 and never automated. We can add a Linear or DoorKing operator to that gate, run conduit under the driveway or along the fence line, and bring the setup to current safety code. Where trenching is impractical, we often recommend a solar gate opener with a battery backup, which keeps the job off your lawn and away from irrigation lines.
Operator Replacement for Failing Builder Units
If your community gate has a mid-2000s Linear or Viking operator that locks up every summer afternoon, we’ll match the mounting footprint and control wiring when possible. That saves the HOA from a full re-trench. Where the board is cracked or the worm gear is stripped, full replacement is cheaper than repeated board swaps, and we’ll tell you which one your unit deserves. We’re factory-trained on DoorKing, Linear, Viking, and Ghost Controls, so the right fix lands the first visit.
Trusted Brands We Service in Brentwood
We install and service operators from Linear, Viking, DoorKing, and Ghost Controls, among others. Many Brentwood HOAs standardized on Linear or Viking in the early 2000s, so we keep common boards, limit switches, and loop detector components on the truck when we’re working in Trilogy or the neighborhoods near Balfour Road. That local inventory lets us finish most replacement jobs in one visit, without waiting on a distributor. If your gate runs a brand we didn’t list here, call (626) 649-4572 and we’ll tell you honestly whether we can support it. We don’t pretend to service equipment we haven’t trained on.
Common Gate Installation Problems We See in Brentwood Homes
- Clustered operator failures from the 2000s build-out. Entire Brentwood HOA communities installed the same Linear or Viking units within the same 2004 to 2008 window. When one fails, the next three on the street are usually close behind. A tech who has fixed one unit in Trilogy has already seen the failure mode in the next subdivision over.
- Hinge-post sag instead of panel sag. The Delta breeze pushes steadily against tall iron gates all afternoon, and the clay-heavy soil under shallow footings lets posts lean over time. We see hinge-post sag more than panel sag in Brentwood because the wind loads the top hinge continuously.
- Missing or undersized conduit from the original build. Many Brentwood gates from the 2000s were installed with no conduit at all. Adding automation now means trenching, and homeowners are often surprised to learn the concrete work is more involved than the operator itself.
- UV coating failure and frame warping. After 15-plus summers of 100°F-plus heat, powder coat on ornamental iron dulls and flakes, and wooden frames check and warp. We see this faster in Brentwood’s inland heat pocket than in coastal cities, which means a new gate often makes more sense than patching the old one.
Pricing for Gate Installation in Brentwood, CA
A single ornamental iron swing gate installation in Brentwood runs $1,800 to $4,000. A double driveway gate runs $3,500 to $6,500. A full electric gate job with a new operator, trenching, and safety sensors runs $3,200 to $7,500. Slide gates run higher than swing gates because the track and roller hardware is heavier and the post work is more exacting. Wooden gates fall on the lower end of the material cost but cost more in maintenance over a Brentwood summer. The written price we give you covers the gate, hardware, concrete, operator, wiring, sensors, and labor. You’ll see that number before any work begins, and it will not change unless you ask for a change in scope. Call (626) 649-4572 for a free estimate. It’s a real number, in writing, with no pressure to accept.
We Also Serve Cities Near Brentwood
Beyond Brentwood, our gate installation and repair crews regularly travel to Oakley, Discovery Bay, Antioch, and Clayton. The drive times are short enough that we can schedule Brentwood-cluster work back-to-back, which keeps our Brentwood pricing competitive with what you’d pay a local crew that only handles one or two gate jobs a year. Same written price, same C.A.R.E. routine, same 365-Day Done Right Promise.
Serving Brentwood, CA - Our Local Coverage Area
We’re based in the Brentwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Brentwood
It depends on which part is failing. If the board is still good and the trip is coming from a worn limit switch or a corroded loop-detector lead, we can usually repair it for $250 to $600 in Brentwood. If the worm gear is stripped or the circuit board has heat cracks from years of 100°F afternoons, replacement makes more sense. Replacement operators installed in Brentwood typically run $1,800 to $3,200 depending on the model and the power work involved. We’ll diagnose it on the first visit and show you the written price for either path. Call (626) 649-4572 and a live person will get it scheduled.
Three things: a power conduit run to the gate, a properly set operator post with a deeper footing, and UL 325 safety sensors. Most manual gates in Brentwood have no conduit from the original build, so we trench a new run and add the loop detector leads at the same time. The full scope usually lands between $3,200 and $6,500 in Brentwood, and we’ll put the full number in writing before we dig. In some Brentwood yards with mature landscaping, a solar opener avoids trenching altogether. We’ll show you both options and the numbers attached to each.
The sustained Delta-breeze wind loading pushes against the top hinge of tall iron gates all afternoon, every afternoon, from spring through fall. When the post footing was poured shallow, which was common in the 2000s build-out, the post leans rather than the panel bowing. We fix this in Brentwood by excavating and repouring a deeper post footing with a wider base, then re-hanging the gate. The repair typically runs $600 to $1,400 if the gate panels are still straight. If the panels have also corroded, a full Gate Installation makes more financial sense, and we’ll tell you that honestly during the estimate.
Yes. Every automatic gate installed in Brentwood should have UL 325 entrapment protection, which means at least one monitored safety device: photocells across the gate path, a contact edge on the leading gate edge, or both on a community gate. Many mid-2000s Brentwood installs skipped these entirely. We won’t install or repair an automated gate without bringing the entrapment protection up to spec, because a gate that doesn’t stop for a dog, a kid, or a car is a hazard, not a convenience. The sensors add $200 to $500 to the total. We’ll include them in your written quote without exception.
Usually, yes. If your Brentwood HOA standardized on Linear or Viking in the mid-2000s, we can match the mounting footprint and often reuse the existing concrete pad and wiring path. Where the original brand is no longer made or the replacement board costs more than a new unit, we’ll suggest the honest alternative and show you both numbers. We’re factory-trained on DoorKing, Linear, Viking, and Ghost Controls, and we stock common boards and limit switches locally for Brentwood jobs. Call (626) 649-4572 and we’ll tell you what’s realistic for your specific gate before you spend a dollar.
Get your Brentwood gate installed right. Call (626) 649-4572 for a free, written estimate. A live person answers, day or night. You’ll get the exact price before any work starts, and the gate will be done right or we’ll make it right under the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Brentwood and the surrounding communities as part of the Cedarwell family of gate specialists.