Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Wrightwood
Electric gate repair in Wrightwood usually costs between $185 and $640 depending on whether we’re replacing a drive gear, rebuilding a hinge post, or retrofitting an obsolete control board. Most jobs are diagnosed in one visit, and we carry the motors, boards, and hardware that Wrightwood gates actually need. Call (626) 649-4572 and a real person answers, day or night.
We know Wrightwood’s gates better than most because we work on them through the seasons that break them. The same operator that runs fine in June is often frozen solid by December, and the pine needles that looked harmless in September have packed themselves into a frozen plug inside the track. This page tells you what we see, what it costs to fix, and how to make the right call between repairing and replacing older equipment up here at 6,000 feet.
Why Latch & Post Gate Repair Is Wrightwood’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been at this since 2009. Our technicians are factory-trained on the brands Wrightwood families actually own: FAAC, BFT, Linear, Viking, LiftMaster, and the rest of the common mountain-cabin operators. Cody Beckman leads our team with one rule: every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on.
What sets us apart in Wrightwood is how we leave your home. Every visit starts with a written price before any work begins, and our techs put on shoe covers and lay drop cloths before stepping inside. When the job is done, you get a photo of the clean-up before we pull out of the driveway. No upcharge for any of it. That’s the Cedarwell C.A.R.E. routine: Clean up like it’s our own home, Ask before we move or touch anything, Respect your time and quiet hours, Explain the price before the work.
For seasonal cabins near Mountain High Resort, this matters even more. You may not be there when we are. You need a crew that treats the place like a neighbor would. Our Electric Gate Repair team handles the full diagnosis, and we can coordinate a fall winterization check before the first snow buries the driveway.
Electric Gate Motor in Wrightwood
Electric Gate Motor replacement in Wrightwood runs $340 to $890 for most residential swing and slide gates, with the final number depending on the brand, horsepower, and whether the rack or chain drive also needs attention. Crews from our Los Angeles office serve Wrightwood locally and arrive with common motors already on the truck, so most calls are resolved in a single day rather than a second follow-up. Older motors on seasonal cabins often fail not from use but from sitting still: ice melt refreezes inside the housing, and when the owner flips the switch in January, the rotor is already seized.
What motor repair typically involves
We test the capacitor, check for water intrusion in the housing, and confirm whether the motor itself is dead or something upstream is cutting power. On a LiftMaster or Viking unit that’s been through a hard freeze, the failure is often mechanical rather than electrical. We tell you plainly if a $200 part saves the motor or if replacement is the clearer path.
When replacement beats repair
If your operator is from the 1990s and the control board has cracked after repeated freeze-thaw cycles, a new motor with a sealed, heated housing usually costs less than chasing repeated board replacements year after year. We’ll show you the numbers side by side before you commit.
Gate Access Control in Wrightwood
Gate Access Control work in Wrightwood typically runs $220 to $480 to repair or replace keypads, remotes, intercoms, and safety sensors, and full retrofits that add modern phone-based entry fall between $650 and $1,400. For seasonal ski-cabin owners, access control is often the first thing to fail: a keypad outside through the winter takes the freeze-thaw cycle directly on its circuit board. We repair what’s serviceable and recommend replacement when a component has become a yearly problem.
Keypad and remote repair at altitude
Cold shrinks solder joints and cracks display screens. We see Linears and FAACs with keypads that work all summer and go blank by February. Most keypad swaps take under an hour. We can also convert older intercom systems to app-based entry so you can open the gate from your car instead of a hail-damaged keypad.
Safety sensors and photocells
Photo eyes aimed across a slide-gate path in Wrightwood collect pine needles, snow, and road gravel, so they drift out of alignment constantly. We set them at the right height for snow country, not the height used in flatland installs. That keeps the beam from getting buried under the first six inches of white and tripping the gate into safety reversal.
Trusted Brands We Service in Wrightwood
Our Wrightwood calls most often involve FAAC operators that have swallowed decades of pine sap, BFT motors frozen into their own housing, and old Linear keypads that finally quit after twenty mountain winters. We stock parts locally for the common failures we see up here, which means many repairs happen the day we arrive. If your gate uses something rare, we order it and return, but we’ll give you the written price for both options before you decide. We don’t pretend to service every brand. We work on the ones families around Wrightwood actually have.
Common Electric Gate Repair Problems We See in Wrightwood Homes
- Frozen pine-needle plugs in slide-gate tracks. Needles from the Jeffrey and ponderosa pines around Wrightwood pack into tracks all fall, then freeze into a solid mass after the first hard snow. The motor keeps pushing until the drive gears strip.
- Obsolete control boards cracking after freeze-thaw cycles. Boards in 1990s-era operators expand and contract with mountain temperature swings. When meltwater refreezes inside the housing, the board cracks along the solder lines and the gate goes dead.
- Wood gate frames bowed by snow load. A wet, heavy snowfall can push a wooden gate frame out of square. Hinge bolts shear at the hinge post, and in some cases the post itself has heaved as the soil froze and thawed beneath it.
- Dead operators on seasonal cabins. Wrightwood properties tied to Mountain High Resort sit unattended for months. Gates fail silently, and owners discover the problem only when they arrive for a ski weekend and the gate won’t move.
Pricing for Electric Gate Repair in Wrightwood, CA
Electric gate repair in Wrightwood runs $185 to $640 for most common fixes. A keypad replacement is typically $220 to $380, a motor swap $340 to $890, and a full access-control retrofit with app-based entry $650 to $1,400. Repairs on slide gates cost more than swing gates because the track and rack need more labor to access. Wrightwood’s snow and freeze-thaw cycles push older equipment toward failure, so we ask what you’d rather spend: a smaller repair now, or a larger replacement six months from now. Every job includes a written price before any work starts. No pressure, no surprise invoice. Call (626) 649-4572 and we’ll walk through what you’re seeing.
We Also Serve Cities Near Wrightwood
Our techs regularly work in Phelan, Victorville, Upland, and Rancho Cucamonga, so we understand both the mountain conditions up here and the valley heat down below. If you have a property in Wrightwood plus a place downhill, we can service both. See our Electric Gate Repair in Wrightwood page for details on the full service area.
Serving Wrightwood, CA - Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Wrightwood
Wrightwood sits at roughly 6,000 feet and averages over 60 inches of snow per year, so operators here face freeze-thaw cycles, ice-melt refreezing inside motor housings, and pine-needle debris that valley operators never see. The same equipment that runs for a decade in Victorville often needs major service after five Wrightwood winters.
Sometimes yes, sometimes no. If the board cracked because meltwater refroze inside the housing, a retrofit board plus a heater kit can buy you several more years. But if the motor is also aging and the housing is no longer sealed, replacement is usually the cheaper long-term answer. We’ll show you the written numbers for both paths. Call (626) 649-4572 for a straight answer.
Usually both. The post heaves when the soil freezes and thaws beneath it, and the gate frame bows under snow weight and shears the hinge bolts. In Wrightwood we rebuild the post with deeper set and drainage gravel, then reset the gate on near hinges. It’s common work on mid-century cabins along Lone Pine Canyon Road and the side streets off Highway 2.
Yes. Photocells prevent a closing gate from striking a child or pet, and they’re required for any automatic gate that can close on someone. In Wrightwood, we set photocells high enough to stay above snow line and clear of pine needles that would otherwise block the beam and freeze the gate in safety mode.
Pine needles from Jeffrey and ponderosa pines collect in slide-gate tracks and chain-drive operators through summer and fall. When the first heavy snow hits, they freeze into a solid plug that stalls the motor and strips drive gears. We clear the track, replace damaged gears, and recommend a fall check so your gate opens when you arrive for ski season.
If your gate is stuck, frozen, or just sluggish, call (626) 649-4572 for a free estimate. A live person answers around the clock, and we’ll give you a written price before any work starts. We serve Wrightwood, Phelan, Victorville, Upland, and Rancho Cucamonga.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Wrightwood since our founding in 2009.