Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Weatherford
Electric gate repair in Weatherford usually means one of two things: an operator that quit, or a gate that stopped moving because the ground moved underneath it. On Weatherford’s ranchettes and acreage properties, the second one is far more common than most people expect. Parker County’s black clay soil heaves seasonally, and gate posts that were dead plumb a few years ago can be 2-4 inches out by now. That’s the repair, even when the motor looks like the culprit. Our crews know this ground. If your gate is dragging, stalling, or refusing to latch, call (626) 649-4572 and we’ll come out, diagnose it, and hand you a written price before any work starts.
Key takeaways:
- Most Weatherford electric gate failures trace back to clay heave under the posts, not a bad operator.
- We quote a written price before touching anything, every visit.
- Live person answers the phone, 24/7.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Why Latch & Post Gate Repair Is Weatherford’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family, operating since 2009 as an independently owned and operated gate specialist. Gate repair is all we do, so the technician who shows up at your Weatherford driveway isn’t learning on your gate. He’s factory-trained on the brands families out here actually own: Linear, Viking, Ghost Controls, DoorKing, and the rest of the names you see on the operator housing. When we arrive, shoe covers go on before we step inside your home or walk your driveway. Drop cloths go down where we work. Before we leave, you get a photo of the clean-up. That’s the Cedarwell C.A.R.E. routine on every job, not an upsell.
Weatherford homeowners tell us the same thing after we finish: the gate works, the driveway looks like we were never there, and the price matched the quote. Cody Beckman, who leads our team, set that standard from the start. Every repair and Gate Installation in Weatherford carries the 365-Day Done Right Promise. If it isn’t right, we make it right. No argument, no fine print. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and our crews work Weatherford locally, so we know which driveways take ten minutes and which ones need a quarter-mile walk to the operator.
Automatic Gate Repair in Weatherford
Automatic Gate Repair in Weatherford starts with finding out whether the gate never had enough motor for the job, or whether the ground shifted and the operator is now fighting the frame. On Weatherford ranchettes, we regularly see 16-to-20-foot tube-steel swing gates paired with residential-duty operators rated for something narrower and lighter. The motor burns itself out in a few years just trying to move that weight against the wind. That’s an automatic gate repair that needs a proper operator upgrade, not a patch. Most automatic gate repairs in Weatherford run between $225 and $650 depending on what we find, and you’ll see the exact figure in writing before we start.
Wide Farm Gates and Heavy Tube Steel
Weatherford’s 5-to-20-acre ranchettes lean on pipe and tube-steel gates that residential operators were never meant to move. The fix is usually a heavier-duty operator sized to the actual gate weight and span, plus new hinges if the old ones are hogging out. We measure the gate, calculate the load, and quote the right motor the first time.
Rack and Chain Bind on Slide Gates
Slide gates on Weatherford acreage run on track that sits just above the dirt. Clay heave bends that track, and then the rack and pinion bind, and then the motor trips its breaker. We reset the track on fresh concrete where needed, re-plumb the rack, and your operator stays where it belongs: running, not stalling.
Electric Gate Motor in Weatherford
Electric Gate Motor replacement in Weatherford is a job we do weekly, and it isn’t always because the motor failed. On long rural driveways, mains voltage drops at the end of a quarter-mile run, glitching loop detectors and keypad readers until the motor looks dead. In other cases, ice storms like February 2021 cracked the housing or seized the gearbox. When the motor truly is done, we swap in a unit rated for your gate’s actual span and weight. Electric gate motor replacement in Weatherford typically runs $350 to $900 depending on the operator class, and that price is written down and agreed before we unbox anything.
Solar Gate Opener Retrofit for Long Driveways
Where the power run to the gate isn’t practical to upgrade, a solar gate opener with a battery bank is the right answer. We spec panels and batteries for North Texas sun and winter fog, then mount everything on the post or a stand. No trenching, no voltage drop headaches, and the gate works like it should.
Ice-Storm Damage and Seized Gearboxes
After a hard freeze, we find freeze-cracked cases and seized gearboxes on exposed rural driveway operators across Weatherford. Water gets in through a hairline crack, freezes, and splits the casting. The repair is a new motor assembly and re-sealed housing, plus new safety photocells if moisture got to them.
Trusted Brands We Service in Weatherford
We stock common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so most Weatherford electric gate repairs don’t wait on a parts order from out of state. If your gate has a Linear arm operator or a Ghost Controls solar kit on a tube-steel farm gate, our technicians know the board layouts, the wiring, and the failure points. That means a first-visit fix more often than not. For full detail on scope, see our Electric Gate Repair service page.
Common Electric Gate Repair Problems We See in Weatherford Homes
- Post footing heave in black clay. Weatherford gate posts tilt 2-4 inches out of plumb within a few seasons as Parker County clay swells and shrinks. The operator gets blamed, but the post reset and concrete work is the actual job.
- Voltage drop on long rural driveways. A quarter-mile wire run from the house to the gate loses enough voltage to glitch loop detectors and keypads. We retrofit solar or install a proper transformer when the wire run isn’t worth reopening.
- Freeze-cracked operator housings. The February 2021 ice storm cracked hydraulic and electromechanical units all over Parker County. We still find seized gearboxes and moisture-damaged boards that trace back to that week.
- Undersized operators on wide farm swing gates. A 20-foot tube-steel gate needs a heavy-duty motor, not a residential unit rated for a suburban panel. When operators are too small, they die early from stall torque.
Pricing for Electric Gate Repair in Weatherford, TX
Electric gate repair in Weatherford typically lands between $180 and $340 for most mechanical and sensor fixes, while operator and motor replacements run $350 to $900 depending on the horsepower and swing or slide application. Post reset work on clay-heaved footings usually adds $250 to $600, and that includes concrete, re-plumb of the gate frame, and re-alignment of everything after it sets. The written quote we hand you is the price you pay. No added charges after the fact. Call (626) 649-4572 for a free estimate and we’ll walk the gate with you before any dollar is discussed.
For more on who we are and where we work, see Electric Gate Repair in Weatherford.
We Also Serve Cities Near Weatherford
Beyond Weatherford, our crews cover Weatherford‘s neighboring communities regularly: Aledo, Springtown, Azle, and Mineral Wells. If your property sits between Weatherford and the county line, we’ll still come out and give you the same written price and the same 365-Day Done Right Promise.
Serving Weatherford, TX - Our Local Coverage Area
We’re based in the Weatherford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Weatherford
Probably not. Most dragging gates on Weatherford ranchettes trace back to gate posts that black clay has heaved 2-4 inches out of plumb, which drags the gate leaf and tricks the opener into stalling. We’ll check the post plumb, the hinges, and the track before we ever point at the motor. Call (626) 649-4572 and we’ll tell you what’s actually wrong, in writing, before any repair starts.
Yes, and on many Parker County properties it’s the better call than trenching a quarter-mile of wire. We size the panel and battery bank for your gate’s cycle count and North Texas winter conditions, so the gate keeps working through short, cloudy stretches. Solar retrofits are one of our most common electric gate repairs in Weatherford.
Yes, a standard repair visit covers diagnosing and replacing freeze-damaged gate operators, and we’ll give you a written price before we start. We still find February 2021 freeze damage on Weatherford gates: cracked housings, seized gearboxes, moisture in the boards. Call (626) 649-4572 for an exact quote, and the estimate is free.
The gate should have working safety edges or photocells that stop and reverse the gate when something is in the way, plus a properly set clutch or force limit. On horse properties and homes with small kids, we test entrapment protection on every visit and replace bypassed sensors as a matter of course. That’s part of the 365-Day Done Right Promise.
We service both, and on Weatherford ranchettes the big tube-steel pipe gates are the majority of our work. We rebuild hinges, reset posts, re-hang 16-to-20-foot leaves, and install operators sized for the actual weight. If it’s a gate and it’s on your property, we’ll fix it.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Weatherford since 2009.