Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across University of California-Davis
Electric gate repair in University of California-Davis typically costs $180 to $640 for common motor, keypad, and safety sensor work, while full operator replacements run $850 to $1,800 depending on the brand and cycle rating. Most repairs behind the alley network are done same-week, and every price is put in writing before we touch a single screw. If your gate is stuck, grinding, or refusing to close, call (626) 649-4572 and a live person will answer, day or night.
We know University of California-Davis gates the way a neighbor does, because we work on them every week. The alley-backed duplexes near Anderson Road, the older cul-de-sac homes around Sycamore Lane, and the rental turnover properties along Russell Boulevard all have their own failure patterns. We see them, we name them, and we fix the actual cause rather than the symptom.
Why Latch & Post Gate Repair Is University of California-Davis’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, in business since 2009 and factory-trained on the brands Davis homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We are not a general handyman service or a big-box installation crew. Every gate comes down to two parts, the latch that holds it and the post that carries it, and that is the job we focus on.
When we walk a job in University of California-Davis, we look at cycle count before anything else. A gate behind a student rental on the alley sees hundreds of open-close cycles a week, which means a control board rated for light residential use is already living on borrowed time. We check the duty rating, the hinge-post footing, and the safety photocells before quoting, because the right fix depends on all three.
Our technicians are background-checked, uniformed, and follow the Cedarwell C.A.R.E. values on every visit: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. Shoe covers and drop cloths go down before we step inside, and you get a photo of the cleanup before we leave. If kids are napping, we bring quiet tools.
Every repair and installation we complete in University of California-Davis is backed by the 365-Day Done Right Promise. If the work is not right, we make it right. No argument, no fine print.
Electric Gate Motor in University of California-Davis
An Electric Gate Motor replacement in University of California-Davis usually runs $550 to $1,200 for high-cycle residential operators from Linear, Viking, or DoorKing, installed and adjusted with new safety photocells. The motor is the muscle, and in Davis it works harder than it would almost anywhere else. When a swing gate behind an alley-facing duplex cycles 40 or 50 times a day through bike commuters, a light-duty motor will fail a year or two after the warranty expires. We size the replacement to the real cycle load, not the manufacturer’s brochure.
What the Job Includes
We remove the old operator, check the hinge posts and gate frame for rot and sag, and install a motor rated for the gate’s actual daily use. Safety edge sensors and photocells get tested or replaced. The written quote lists every part before we start.
When Replacement Beats Another Repair
Motor boards and arm assemblies on older units can be repaired once or twice cheaply. But when the motor itself has been stalling against a swollen gate or a sagging post, the brushes and gear train are already worn. Repeated repairs on a dead motor cost more than a proper retrofit by the third visit.
Gate Access Control in University of California-Davis
Gate Access Control work in University of California-Davis typically costs $180 to $480 for keypad replacement, new remote programming, or a basic intercom repair, while a full access system with a phone-based controller can reach $900 to $1,600. The goal is simple: the gate opens for your family, your tenants, and your delivery drivers, and stays closed for everyone else. In Davis’s rental-heavy neighborhoods, that balance matters more than most cities.
Keypads and Remotes
We replace worn keypad buttons, reprogram remotes after battery corrosion, and sync the whole system when a new tenant takes the unit. If the keypad is mounted on a post that is beginning to lean, we address that too, because a misaligned mount breaks the keypad wiring within months.
Intercom and Phone-Entry Systems
Older apartment gates near the UC Davis campus often have intercom panels with failing relays. We service those, and we also install modern phone-entry controllers that work over cellular instead of a landline. Every access control job ends with us walking the owner through each code and override.
Trusted Brands We Service in University of California-Davis
We stock boards, arms, and safety sensors for the brands Davis gates actually wear out: Linear, Viking, Ghost Controls, and DoorKing. For legacy LiftMaster units with cooked control boards, we keep the common replacement boards on the truck when possible, so a diagnostic visit often ends with a working gate the same day. You will never hear us push a full replacement when a $220 board swap gets your gate running. If you need a heavier operator, we quote it, and you decide with the written price in your hand. For more about how this service fits the bigger picture, see our Electric Gate Repair hub page.
Common Electric Gate Repair Problems We See in University of California-Davis Homes
- Alley-driven high-cycle wear on control boards. Gates behind the paved alleys cycle hundreds of times a week, which overheats light-duty boards and browns out the solder joints years before a suburban gate would fail.
- Wood gate frames that shrink in 100°F summers and swell in tule fog. The Sacramento Valley dry-wet cycle cracks circuit enclosures and makes gates swell so hard the operator stalls against a jammed swing.
- Hinge posts rotted at the footing. Sagging gates are usually a post problem, not a gate problem. Gates installed before modern UL 325 entrapment rules often have no working safety photocell and a post that must be reset before any motor work matters.
- No safety sensors on older installations. Many legacy operators around Davis were installed years ago without proper photocells or edge sensors, and when the board fails, the missing safety gear becomes a real hazard that we address as part of the repair.
Pricing for Electric Gate Repair in University of California-Davis, CA
Most standard electric gate repairs in University of California-Davis land between $180 and $640. Keypad swaps run $180 to $280. Safety sensor replacement runs $140 to $260 per pair. Control board replacement on a legacy LiftMaster or DoorKing runs $220 to $480. A full operator retrofit with new motor, arms, and photocells runs $850 to $1,800, which includes the equipment rated for alley-level cycle counts. Every price is written before we start, and you approve it in advance. Call (626) 649-4572 for a free estimate on your specific gate.
We Also Serve Cities Near University of California-Davis
Our electric gate repair work in University of California-Davis is part of the broader Cedarwell service area. We regularly see the same legacy gates and the same dry-wet wood cycle in Los Angeles, San Diego, San Jose, and San Francisco, and we bring the same C.A.R.E. routine and written pricing to every one of those cities.
Serving University of California-Davis, CA - Our Local Coverage Area
We’re based in the University of California-Davis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in University of California-Davis
Yes, and it is the most common killer we see in University of California-Davis. A gate cycling 40 to 50 times a day wears out a light-duty residential motor within two to four years, while a high-cycle motor built for that load can last eight to ten. We check the duty rating on your board and motor before recommending any repair. Call (626) 649-4572 and we will tell you honestly whether your current unit is the right one for that load.
Often, the board is the only failed part. Behind an aging duplex block off Anderson Road, we found a LiftMaster operator whose original control board had browned out, and whose hinge post had rotted through at ground contact. The panel was fine, but the post was the real failure. We pulled the old board, set a new post footing, reinforced the hinge mounts, and re-hung the gate with a modern high-cycle operator and fresh photocells. The owner had been quoted a full gate replacement. A targeted retrofit fixed it for a fraction. The honest answer depends on the post, the frame, and the arm geometry, not just the board.
If the gate is missing them, we will not leave it that way. Modern UL 325 entrapment standards require working photocells and reversing edges, and any older gate in University of California-Davis without them is a liability. We add safety sensors as part of the repair, and we put it in the written quote before the work starts.
That is the Sacramento Valley dry-wet cycle at work. Summer heat above 100°F dries and shrinks the wood frame, opening joint gaps and loosening hinge mounts. Then the tule fog and winter rain re-saturate the same wood, swelling it so much the gate binds against the latch side. Over years, the hinge post rots at ground contact, and the gate begins to sag permanently. We reset the post footing, add a backer board to the hinge mounts, and use stainless or zinc-plated hardware so the next decade looks better than the last one.
Most electric gate repairs in University of California-Davis run $180 to $640. Operator and motor replacements start around $850 for high-cycle residential units. The exact number depends on the post and the board, and you will see it in writing before we begin. Call (626) 649-4572 for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving University of California-Davis since 2009.