Electric Gate Repair in The Colony - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Electric Gate Repair Across The Colony

Electric gate repair in The Colony usually costs between $180 and $340 for common fixes like hinge-post realignment, opener-arm adjustment, or safety-sensor replacement, and most jobs are completed the same day once a technician arrives. If your gate has stopped latching, started grinding, or the keypad quit responding, a factory-trained technician from our Electric Gate Repair team can be at your door quickly. We know The Colony’s gates fail in specific ways, and we carry the parts to match. Call (626) 649-4572 for a free estimate over the phone.

Call (626) 649-4572

Why Latch & Post Gate Repair Is The Colony’s Preferred Electric Gate Repair Company

Latch & Post Gate Repair has been part of the Cedarwell family of independently owned and operated gate specialists since 2009, and our technicians work on the brands The Colony homeowners actually have: Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. We’re a gate specialist, not a general handyman, which means the right fix happens on the first visit more often than not. Every technician is background-checked and uniformed, and every call is answered by a live person, 24 hours a day, 7 days a week, including holidays.

The Colony’s gates demand local knowledge. When you live near Stewart Peninsula or along the lakefront corridors off Main Street, the air itself works against your gate hardware. We carry marine-grade stainless fasteners and two-stage powder-coat finishes on our trucks because we know standard painted steel doesn’t survive lake wind. That’s the difference between a repair that lasts one season and one that lasts.

Gate Access Control in The Colony

Gate access control in The Colony covers the electronics that decide who gets in: keypads, remote controls, intercom systems, vehicle loop detectors, and the control boards that tie them together. When your keypad stops accepting the code or a remote works only when you’re six inches from the receiver, the access control system needs attention. Most access-control repairs in The Colony run $150 to $380, depending on whether we’re replacing a keypad, a receiver board, or buried loop-detector wiring. You’ll see the exact number in writing before any work starts, quoted and agreed, every single visit.

Keypad and Intercom Replacement

We replace weathered keypads on subdivision entrance gates throughout The Colony’s HOA-governed communities. Sun and lake wind are hard on keypad faceplates; we install sealed, weather-rated units that hold up better than the originals.

Vehicle Loop Detectors and Photocells

The black-clay heave that shifts posts also cracks buried loop-detector wires and pulls photocells out of alignment. We test the loop, locate the break, and repair or replace it so the gate stops phantom-opening at 2 a.m.

Commercial Gate Operator in The Colony

A commercial gate operator in The Colony is the motor and drive assembly that cycles a heavy driveway or entrance gate hundreds of times per week. When The Colony’s clay soil moves a post even half an inch, the operator arm binds, the rack-and-pinion loses mesh, and the motor draws excess current until it burns out. Commercial operator replacement typically runs $1,200 to $3,800 in The Colony depending on gate weight, operator type, and whether we’re reusing the existing rail, all priced in writing before work begins. For shops, offices, and HOA entrances along the Highway 121 corridor, we schedule measured, quoted work with no same-day dispatch promises, just a free on-site measurement and a written price.

Slide Gate Operator Alignment

Slide gates on rack-and-pinion drives are especially sensitive to post movement, which is a constant fact of life on The Colony’s expansive clay soils. When the rack and pinion lose mesh, the gate shudders mid-cycle and eventually stops altogether.

Loop Detector and Safety Edge Replacement

As the sea of black clay swells and contracts with every drought-and-rain cycle, buried loop-detector wire stretches and snaps, and the operator reads a false vehicle presence. We replace the loop, recalibrate the safety edges, and set the force limits so the gate never closes too hard on a car or a person.

Trusted Brands We Service in The Colony

We service Linear, Viking, Ghost Controls, and DoorKing operators, plus LiftMaster, FAAC, BFT, and Mighty Mule, and we keep common boards, sensors, and remotes stocked locally for fast turnaround. If your Gate opener was installed with a specific brand in mind, you don’t have to call a different company for each unit; our technicians carry parts for the systems we see most often in The Colony.

Common Electric Gate Repair Problems We See in The Colony Homes

• Hinge-post heave from black-clay soil: North Texas’s expansive clay swells with spring rain and shrinks during summer drought, shifting the hinge post and throwing the gate panel out of square even when the gate itself is undamaged. We reset the post footing with a deeper, moisture-stable base and re-hang the gate.
• Lake-wind corrosion on operator boards and galvanized hardware: Southerly winds off Lewisville Lake push moisture across The Colony, oxidizing bare or single-stage-painted iron and attacking control boards years before landlocked cities like Frisco see the same damage. We swap salt-damaged fasteners for marine-grade stainless and re-coat with a two-stage powder-coat finish.
• Rack-and-pinion and loop-detector failure from post movement: When a slide-gate post shifts, the rack and pinion lose mesh, and the buried loop detector cracks or pulls loose, causing phantom openings and false safety trips. We realign the drive and re-seal the loop.
• Weld fatigue at the top rail from post shift: A shifting post puts the frame under load it wasn’t designed to carry, and the top-rail weld cracks, especially on ornamental iron gates 30 to 50 years old. We re-weld the frame, reinforce the joint, and stabilize the post so it doesn’t happen again.

Pricing for Electric Gate Repair in The Colony, TX

We Also Serve Cities Near The Colony

Beyond The Colony, our technicians work in Little Elm, Lewisville, Lake Dallas, and Carrollton. If you’re in one of those communities and your gate stopped working, call (626) 649-4572 and we’ll get you scheduled.

FAQs About Electric Gate Repair in The Colony