Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across Seal Beach
Electric gate repair in Seal Beach typically runs $185-$540 for most drive gate and pedestrian gate fixes, with the largest share of work coming from Leisure World’s aging mid-century operators and Old Town’s salt-tested custom ironwork. If your gate stopped accepting the remote, drags on its hinges, or the motor hums without moving, we can usually get a technician to your Seal Beach property the same day you call. Whether the gate fronts a beach bungalow on Electric Avenue or a Leisure World vehicle entry, the fix starts with a written price before we touch anything. Call (626) 649-4572 and a live person answers, any hour.
Why Latch & Post Gate Repair Is Seal Beach’s Preferred Electric Gate Repair Company
We focus on one thing: gates. Latch, post, motor, keypad, sensor, control board. That narrow focus means we carry the odd adapter brackets, rust-resistant fasteners, and 1970s-vintage spec knowledge that a general handyman does not. In Seal Beach, that specific knowledge matters more than almost anywhere in Orange County. In Leisure World we were called on a 1970s-vintage slide gate whose original operator had died; the replacement LiftMaster unit would not bolt to the legacy frame, so we fabricated a custom adapter bracket, replaced the rusted rack and pinion, and reset the loop detector. The gate now cycles smoothly and the DoorKing keypad entry and intercom were re-matched to the new operator so residents could open it from the clubhouse.
Every visit follows the Cedarwell C.A.R.E. routine. We lay drop cloths on the driveway where we work, put on shoe covers before stepping inside, ask before we move or touch anything, and send you a photo of the clean-up before we leave. Cody Beckman, who leads the Latch & Post team, built the same expectation into our 365-Day Done Right Promise: if the repair is not right, we make it right. No argument. No fine print.
We serve Seal Beach from the brand’s Los Angeles office, with crews dispatched locally. Background-checked, uniformed technicians carry parts for Viking, Ghost Controls, and DoorKing systems, among others, so most repairs finish on the first visit rather than after a second trip.
Automatic Gate Repair in Seal Beach
Automatic Gate Repair in Seal Beach usually means one of three jobs: replacing a rusted-out motor on a swing gate that faces the marine layer, re-plumbing a sagging hinge post on an Old Town side-yard gate, or retrofitting a Leisure World vehicle gate whose original operator predates modern mounting patterns. The work starts at $215 for a hinge realignment and runs to about $850 when a full operator replacement plus custom bracket fabrication is required.
Marine-Layer Motor Failures
Salt air off the Seal Beach coast settles on everything. On an automatic gate, it eats the operator housing, the limit switches, and the low-voltage control board terminals. We often find a gate that opens manually but will not move under power – and the fix is a rebuilt board or a sealed replacement motor, not a full gate rebuild.
Leisure World Operator Retrofits
A significant share of Leisure World’s vehicle and pedestrian gates run on a proprietary 1970s access-control spec. A standard LiftMaster or DoorKing operator will not bolt to the original frame. We fabricate adapter brackets on site, re-match the keypad and intercom to the new operator, and the gate runs as quietly as the community’s mid-century design allows.
Electric Gate Motor in Seal Beach
Electric Gate Motor replacement in Seal Beach costs between $420 and $980 for most residential gates, depending on whether we can reuse the existing arm, rack, and mounting plate or need to fabricate new ones. The motor is not the only part that ages in salt air – the capacitor, the gear assembly, and the wiring terminals all corrode at different rates. We replace the motor only when the failure is truly the motor; otherwise we rebuild the failing component and save you the difference.
Swing Gate Motor Replacement
On Old Town beach bungalows, swing gates settle on sandy coastal soil and the motor works harder every year. A dragging gate pulls more current through the operator, so we set the post and hinge alignment first. Mounting a new motor to an out-of-plumb post just shortens its life. Motor replacement on a properly aligned swing gate ranges from $420 to $680.
Slide Gate Motor and Rack Work
Leisure World’s slide gates need the rack and pinion inspected as part of any motor replacement. A rusted or worn rack destroys a new motor within months. We replace the rack where needed and set the chain or belt tension before we hand the remote back to you. Full motor plus rack replacement on a vehicle slide gate typically runs $700 to $980.
Trusted Brands We Service in Seal Beach
Our technicians train on the brands Seal Beach families actually own: Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. For Viking and DoorKing we stock replacement boards, remotes, and safety-edge sensors in our service vehicles, so a Seal Beach repair does not wait on a parts shipment. Ghost Controls systems, common on mid-sized residential gates in Seal Beach, are supported with factory-consistent programming and sealed connection kits that resist the marine air. We will never push a brand swap just because we do not carry the part.
Common Electric Gate Repair Problems We See in Seal Beach Homes
- Salt-corroded limit switches and operator housings: Direct oceanfront exposure and the persistent marine layer mean metal parts that last 10-12 years inland often fail here in 5-7 years. We replace with marine-grade stainless fasteners and sealed enclosures where possible.
- Out-of-plumb hinge posts on Old Town side gates: Wood and wrought-iron gates settle unevenly on sandy coastal soil, throwing posts out of plumb. We re-set the post footing, not just the hinge, so the gate stops dragging and the motor stops overworking.
- Leisure World’s 1970s-era access-control spec: Standard replacement operators will not mount to the legacy frames. Custom bracket fabrication and adapter kits are a normal part of repair here, not an exception.
- Oxidized low-voltage control boards: Seal Beach’s salt-heavy air corrodes board terminals and capacitor leads, causing intermittent operation or total failure. We test the board before condemning the motor – it saves replacing an expensive part that was never the problem.
Pricing for Electric Gate Repair in Seal Beach, CA
Here are the numbers, straight. A standard gate-latch replacement in Seal Beach runs $185-$295. Keypad or remote control repair runs $120-$240. Safety sensor replacement runs $150-$310 per pair. Control board diagnosis and repair runs $200-$450. A full electric gate motor replacement runs $420-$980, with the higher end covering custom bracket fabrication for Leisure World’s legacy frames. Every price is written down and agreed before work begins. You will never get a final invoice bigger than the quote we handed you before the first tool came out.
- Gate latch replacement: $185-$295
- Remote or keypad repair: $120-$240
- Safety sensor replacement: $150-$310 per pair
- Control board diagnosis and repair: $200-$450
- Electric motor replacement: $420-$980
Call (626) 649-4572 for a free estimate. The written price is our standard, not an option.
We Also Serve Cities Near Seal Beach
If you are just outside Seal Beach, we also cover Los Alamitos, Cypress, Hawaiian Gardens, and Westminster. Our Electric Gate Repair team carries the same parts and offers the same written-price guarantee across every neighboring zip. For a full picture of how we serve Seal Beach specifically, see Electric Gate Repair in Seal Beach.
Serving Seal Beach, CA - Our Local Coverage Area
We’re based in the Seal Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Seal Beach
Salt-laden marine air off the Seal Beach coast accelerates corrosion of everything metal on the gate: hinges, latches, operator housings, wiring conduit, and low-voltage control board terminals. Operators that last 10-12 years inland typically need service here in 5-7 years. We counter this with sealed enclosures, marine-grade fasteners, and dielectric grease on every electrical connection. Call (626) 649-4572 for an inspection.
Many of Leisure World’s vehicle and pedestrian gates were built to a proprietary 1970s access-control spec, so the mounting pattern, rack style, and limit-switch layout do not match any modern off-the-shelf operator. We fabricate custom adapter brackets on site and re-match the keypad and intercom to the new operator. This is a routine repair for us, and the written price covers fabrication.
Usually yes. Dragging Old Town gates are almost always a post-footing problem: the sandy coastal soil has settled and thrown the hinge post out of plumb. We re-set the post footing, re-align the hinges, and only replace the gate leaf if it is structurally rotten or cracked. Most dragging gates are saved. Call (626) 649-4572 and we will tell you over the phone what the likely scope is.
A safe gate has working safety edges or photo-eye sensors, a reversing mechanism that responds to obstruction, and a control board that has not been compromised by salt corrosion. We test all three on every visit. If the gate does not reverse under pressure, keep kids and pets away and call us. We will not leave a gate running that could close on a child, a pet, or a car.
Yes. Many Leisure World and Old Town gates have intercom and keypad entry systems that are 20-40 years old. We replace the keypad, the intercom module, or the full entry system where needed, and re-match it to the operator so residents can open the gate from the clubhouse or their phone. Keypad replacement runs $120-$240; full intercom replacement runs higher depending on the run length and existing wiring.
Call Latch & Post Gate Repair in Seal Beach
If your electric gate is acting up – grinding, drifting, not accepting the remote, or refusing to close all the way – call (626) 649-4572 for a free estimate. A live person answers, day or night. We will give you a written price before any work starts, we will protect your driveway and floors while we work, and we will send you a photo of the clean-up before we pack up. That is the Cedarwell C.A.R.E. standard, and it applies to every gate we touch in Seal Beach.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Seal Beach gate repair needs through the Cedarwell family of gate specialists.





Before
After
Before
After
Before
After