Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across San Anselmo
Electric gate repair in San Anselmo usually costs between $225 and $680 depending on whether the problem is a failed motor, a corroded control board, or a gate that has drifted out of alignment on a sloped driveway. Most repairs on this side of Ross Valley are completed the same day we diagnose them, because our trucks carry the parts these older systems actually need. We know San Anselmo’s blocks well: the Craftsman bungalows off Sir Francis Drake Boulevard, the hillside homes above downtown with 1950s and 60s driveway gates, and the creek-adjacent properties where winter water finds its way into places it should not. Call (626) 649-4572 for a written price before any work begins.
Why Latch & Post Gate Repair Is San Anselmo’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair has been part of the Cedarwell family since 2009, and our gate installation in San Anselmo and repair work centers on the gates this town actually has: original wooden swing gates on turn-of-the-century Craftsman homes, automatic driveway gates on 1950s-70s hillside lots, and operators that have been through more than one flood season near San Anselmo Creek. Homeowners here tell us the same two things again and again: they want a straight answer on whether the old system can be saved, and they want to know the price before anyone starts pulling things apart. We deliver both.
Every San Anselmo job is handled by a background-checked, uniformed technician who follows the Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside, because gates often mean walking through the entry hall or the mudroom. We can schedule around nap time if quiet matters, and we choose pet-safe lubricants where there’s a choice. Cody Beckman, who leads our team, insists on this on every single job, not just the easy ones.
Our Electric Gate Repair team coordinates dispatch from the San Francisco Bay Area office, with crews serving San Anselmo locally. That means when a homeowner near downtown calls about a dead opener after a storm, they’re not waiting on someone who does not know where the creek actually runs.
Gate Opener Repair in San Anselmo
Gate Opener Repair in San Anselmo typically runs between $250 and $540, and on the valley floor it often comes down to what the wet season did to the motor and gear assembly. An opener that hums but will not move usually has a seized gear or a capacitor that has given up. An opener that does nothing at all points to the control board, the wiring, or a transformer that took on moisture. We diagnose it on site, quote the exact repair in writing, and only then touch a screwdriver.
Control Board and Wiring Diagnosis
Older operator boards, especially early LiftMaster and Linear units still common in San Anselmo garages, corrode along their terminals after repeated exposure to valley moisture. If a board has visible oxidation on the relay points, retrofitting a new aftermarket board usually costs less than chasing intermittent failures. We stock common boards locally, so a same-week turnaround is typical even for a 15-year-old operator.
Gear, Chain, and Rack Assembly Repair
Hillside driveway gates in San Anselmo work against gravity every single cycle, and that strain lands on the gear and chain assembly. When those teeth wear or skip, the gate jerks, jams, or reverses mid-travel. Replacing the gear and re-tensioning the chain on a standard residential operator runs about $320 to $480 in this market, parts and labor included.
Automatic Gate Repair in San Anselmo
Automatic Gate Repair in San Anselmo covers the full system, not just the motor: the arm or chain drive, the wheels or hinge hardware, the safety sensors, and the stops that keep the gate from over-traveling. A full-system automatic gate repair in this area generally falls between $350 and $1,200 depending on how many components failed and whether the gate itself pulled away from its posts. The quote you get covers everything at once, so there’s no running total while we work.
Safety Sensor and Entrapment Protection
Gates installed before modern UL 325 entrapment protection became standard often lack functional photocells or contact edges. That is a real safety issue, especially with kids and pets around. We can retrofit working safety sensors onto most pre-existing San Anselmo operators. It usually adds $140 to $230 to a repair, and it means the gate actually stops and reverses when something is in its path.
Misaligned and Dragging Gates
Sloped driveways on the hills above San Anselmo settle, and when the ground shifts, the gate shifts with it. Hinges pull, posts lean, and the gate drags on the pavement or the track. We reset hinge geometry and re-align the drive system so the operator is not fighting its own gate. A straightforward re-alignment on a residential gate is $180 to $320; if post footings need resetting, the job is larger and we’ll say so before any work starts.
Trusted Brands We Service in San Anselmo
We are factory-trained on the brands San Anselmo homeowners actually have bolted to their posts and garage walls: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That training matters here because older FAAC and Linear hydraulic operators are common on the 1950s and 60s hillside homes, and those are not units a general handyman should open. We keep common parts and boards for these brands in local stock, which shortens most San Anselmo repairs to a single visit rather than a parts-order wait.
Common Electric Gate Repair Problems We See in San Anselmo Homes
- Post-flood operator corrosion. Winter water and silt reach gate bases on low-lying creek-adjacent and downtown properties, oxidizing operator motors, wiring, and control boards in ways hilltop gates never see. After a heavy storm, our technicians pull the cover off any operator in these zones to check for silt-packed tracks and corroded terminals before they fail outright.
- Wet-dry wood cycling. Marin County’s extreme wet and dry seasons swell old wooden gate frames until latches bind and hinges pull, then shrink them into cracked, loose joints by late summer. We see this every year on the original wood gates throughout San Anselmo’s Craftsman-era neighborhoods.
- Settled hillside driveway gates. Gates installed on 1950s-70s hillside lots drift out of alignment as the grade shifts over decades. Operators keep pushing a gate that’s now dragging or binding, which burns out motors and strips gears prematurely.
- Obsolete control boards. Many older gates around San Anselmo still run on boards that manufacturers stopped supporting years ago. When those fail, the question is not whether we can fix the board, but whether a retrofit board makes more sense than continuing to patch a 20-year-old unit.
Pricing for Electric Gate Repair in San Anselmo, CA
Gate opener repair on the San Anselmo valley floor and surrounding hills runs $250 to $540 for a standard motor, gear, or board replacement. Full automatic gate repairs, where multiple components have failed or the gate has pulled out of alignment, run $350 to $1,200. Safety sensor retrofits add $140 to $230. A gate post reset is the expensive one: if the footing has rotted or shifted, that job starts around $900 because it involves concrete work, not just gate hardware. The written price is always in your hand before we start, and if the repair isn’t right, our 365-Day Done Right Promise means Latch & Post makes it right, no argument, no fine print. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near San Anselmo
Our crews regularly cross the Ross Valley to serve Fairfax, Kentfield, San Rafael, and Larkspur. If your gate is in one of those neighboring towns, the same written-price, drop-cloth, cleanup-photo standard applies. When you call about Electric Gate Repair in San Anselmo, we’ll confirm your address and route the nearest technician to you.
Serving San Anselmo, CA - Our Local Coverage Area
We’re based in the San Anselmo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in San Anselmo
Not necessarily. We start by opening the operator housing and checking what the water actually reached. Some components, like a bracket or a limit switch, are cheap to replace and the system still has years left. But if the control board is oxidized and the motor windings have been sitting wet, a full replacement is often the cheaper answer than patching a 20-year-old unit piece by piece. We’ll show you the exact condition on site before recommending anything, and you’ll have a written price for both repair and replacement options. Call (626) 649-4572 to schedule a diagnosis.
Yes. Most pre-existing operators can accept current photocells and contact edges, and we retrofit them regularly on older gates around San Anselmo. It typically adds $140 to $230 to a repair, and it brings an older system up to modern UL 325 entrapment protection standards. If your gate was installed before these standards existed, this is the single most worthwhile upgrade we’d suggest. Call (626) 649-4572 for a written quote.
In San Anselmo, it’s usually the post or the hinge geometry, not the gate panel itself. Wet winters swell the wood enough to bind the latch, then dry summers shrink it so the gate sags on the hinges. The panel is often fine; the post has shifted or the hinges have pulled loose from years of that cycle. We check the post footing, correct the hinge alignment, and only then look at the latch. A re-alignment runs $180 to $320; if the post footing has failed, that’s a larger job and we’ll give you the exact number before any work starts.
San Anselmo sits on the valley floor along San Anselmo Creek, and the town’s documented flood events, most famously 2005 and 2006, repeatedly deposit silt, debris, and standing water into gate tracks and operator housings. The moisture and sediment corrode motor components and control boards in a way that ridgeline towns like Ross and upper Fairfax simply do not experience. Technicians working the blocks near downtown and Sir Francis Drake Boulevard know to pull the cover off any automatic operator after a heavy winter storm and check for silt-packed tracks and oxidized wiring. That’s a chronic callback pattern unique to this part of Marin.
Yes. Hillside driveway gates on the slopes above San Anselmo drift out of alignment as the grade settles over decades, and the correction is a standard part of what we do. We re-set the hinge geometry, re-align the drive system to the new position, and re-test the safety sensors so the operator isn’t fighting its own gate. Most re-alignments run $180 to $320, and if the post footing has shifted enough that re-alignment won’t hold, we’ll show you exactly what’s needed before recommending anything. Call (626) 649-4572 for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving San Anselmo and the Ross Valley since 2009.