Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Royal Palm Beach
Electric gate repair in Royal Palm Beach usually comes down to one of three things: a control board fried by a summer lightning strike, an operator from the 1980s or 90s with parts nobody makes anymore, or a power run that was never built to handle the gate in the first place. We fix all three, and we do it fast because in this village a broken gate often means a whole community sitting in traffic while the board decides what to do. Latch & Post Gate Repair is part of the Cedarwell family and has been doing this work since 2009. If your gate is down right now, call (626) 649-4572 and a live person will answer, day or night.
Why Latch & Post Gate Repair Is Royal Palm Beach’s Preferred Electric Gate Repair Company
Royal Palm Beach is not like most South Florida cities. It was built out in master-planned waves from the mid-1970s through the early 2000s, and nearly every neighborhood here carries an HOA with a community entrance gate. That changes how repair work actually happens. We deal with property managers, board approvals, and commercial-style operators, not just a homeowner and a wonky motor. Cody Beckman, who leads our team, has spent years working this exact dynamic, and our techs know the difference between a quick residential fix and a community gate that needs board sign-off before we touch a wire.
Homeowners in Royal Palm Beach call us because we show up knowing the neighborhood. We know La Mancha, we know the communities off Southern Blvd, and we know that a gate stuck closed on Crestwood Blvd at 7 a.m. is a problem for three hundred people, not one. Our response time here is measured in hours, not days. When we arrive, we hand over a written price before any work starts, and every tech wears shoe covers and lays drop cloths inside the home. If the gate is outside and we never step foot inside, you still get the same straight-answer pricing. We carry parts for FAAC, Viking, and Linear operators locally so the common failures on Royal Palm Beach gates get fixed the same day, not a week later when a box shows up from a warehouse.
Automatic Gate Repair in Royal Palm Beach
Automatic gate repair in Royal Palm Beach starts with the operator, because that is what usually dies first. The village’s original gates from the 1975-1995 build-out ran on Linear, Eagle, and early LiftMaster operators, and those control boards are long discontinued. When one fails, we check the board, the limit switches, the loop detector, and the safety photocells, then tell you straight whether it is worth repairing or the whole unit should be replaced. A repair on a newer board typically runs $180-$340 in Royal Palm Beach. A replacement operator on an old community gate runs higher, usually $1,200-$2,800 installed, because the job includes new safety edges and often rewiring the power run to match modern draw.
Board and Limit Switch Diagnostics
Most automatic gate failures here begin with the control board. A lightning strike or a power surge from the afternoon storm season June through September will take out a board and the gate defaults to closed and locked. We bench-test the board, check the limit switch contacts, and replace only what failed.
Operator Replacement on Aged Gates
When the operator is original to a 1980s or 90s build, repair often makes no sense. The parts are gone, the wiring is undersized, and a new FAAC or Viking unit will run cleaner and quieter. We quote the full job in writing before ordering anything.
Electric Gate Motor in Royal Palm Beach
Electric gate motor repair in Royal Palm Beach is a different job depending on whether you have a slide gate or a swing gate. Slide gates use a chain-driven motor mounted at the base of the panel. Swing gates use an articulated arm or a buried piston motor. Both run hot in this climate. The constant UV, humidity, and summer heat accelerate corrosion on motor housings, internal wiring harnesses, and weld joints far past what northern builders ever designed for. A motor replacement on a single-family gate in Royal Palm Beach usually runs $700-$1,500, and we always check the existing power run before we promise a motor will hold.
Slide Gate Motor Failure
Slide gate motors in Royal Palm Beach fail from a few repeat causes: worn capacitor, stripped drive gear, or water intrusion at the enclosure seal. We open the motor, inspect it, and if the windings are still good we swap the failed part rather than selling you a whole box.
Swing Gate Motor and Post Alignment
A swing gate motor that strains every cycle is often fighting a sagging hinge post, not a weak motor. We check the post footing and weld joints, because replacing a motor on a post that is canting over just buys you six months of frustration.
Trusted Brands We Service in Royal Palm Beach
Our techs are factory-trained on FAAC, BFT, Linear, and Viking, which are the brands most common across Royal Palm Beach HOA entrances and private driveways. We keep boards, safety edges, and remote receivers for those brands in our local stock, so a failed FAAC swing operator or a Linear gate motor does not sit dead for a week while parts crawl through shipping. When an original builder-grade unit is too old for parts, we will tell you that on the first visit, and recommend a replacement that fits the existing gate panel and power.
Common Electric Gate Repair Problems We See in Royal Palm Beach Homes
Royal Palm Beach has its own failure patterns. These are the calls we run most often here:
- Lightning-damaged control boards. The storm season from June through September puts this village in one of the highest lightning-strike zones in the continental U.S. A single cell crossing Southern Blvd can knock out gate operators in four or five HOA communities within half a mile, and every one of those property managers calls us at the same time.
- Original 1980s operators with discontinued parts. The master-planned communities built between 1975 and 1995 used Linear, Eagle, and early LiftMaster gear that nobody supports anymore. When the limit switch or board dies on one of those, replacement is the honest fix, not a patch.
- Missing or undersized conduit from the original build. Some Royal Palm Beach homes had a manual gate at first, and someone later fitted an aftermarket operator without running proper power. The voltage drop causes nuisance resets and repeat failures until the conduit is corrected.
- Safety photocell and keypad intrusion. Direct sun and rain intrusion on enclosures here trip the entrapment protection and strand gates in safe-mode. We reseal the enclosure, realign the beam, and test the keypad weathertight before we call it done.
Pricing for Electric Gate Repair in Royal Palm Beach, FL
A control board replacement on a common Royal Palm Beach operator runs $180-$340. A motor swap on a residential slide or swing gate runs $700-$1,500, and a full operator replacement on a community entrance runs $1,200-$2,800, including new safety edges and any rewiring needed to bring the power run up to modern spec. The exact number depends on the brand, the gate panel size, and whether the conduit is already there. You will see that number in writing before we order a single part or touch a single wire. Estimates in Royal Palm Beach are free. Call (626) 649-4572 and we will give you a straight figure.
We Also Serve Cities Near Royal Palm Beach
Our Royal Palm Beach crews also cover Wellington, Greenacres, Palm Beach Gardens, and West Palm Beach. If you are just across the line in any of those communities, you get the same written price, the same 365-Day Done Right Promise, and the same local knowledge. Here is what full Electric Gate Repair service covers across the area, and you can read more about our work here at Electric Gate Repair in Royal Palm Beach.
Serving Royal Palm Beach, FL - Our Local Coverage Area
We’re based in the Royal Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Royal Palm Beach
Royal Palm Beach sits in one of the highest lightning-strike-density zones in the continental U.S., and a direct or near strike on a community gate operator will destroy the control board and often the loop detector module too. Because HOA gates default to the closed and locked position on power loss, one strike can lock down an entire community in seconds. We carry replacement boards locally for the common brands and can usually restore a neighborhood entrance the same day. Call (626) 649-4572 if your community gate is down.
If the operator is a first- or second-generation Linear, Eagle, or early LiftMaster unit, repair is usually not practical because the boards and limit switches are discontinued and no one manufactures them anymore. We will confirm on site before recommending anything, but when a forty-year-old operator fails, replacement is cheaper than chasing used parts every six months. We quote a full replacement in writing before any work begins.
Yes, but the honest answer is that the power and conduit run has to go in first. Some Royal Palm Beach homes built with a manual gate later had an aftermarket operator slapped on without proper wiring, and that is exactly why those gates reset and fail constantly. We can run the correct conduit, size the breaker, and install a proper operator with safety edges and photocells so the gate works every time. A written price comes first.
Automatic gates in Royal Palm Beach require entrapment protection: safety photocells, contact edges or sensing edges, and a properly functioning loop detector where the gate crosses a traffic path. These are not optional add-ons. A gate that closes on a child on a bike or a pet in the path is a liability no HOA should carry, and we test all of it on every job. We install UL-rated edges and realign the photocells before clearing the gate for use.
Because the post footing or the weld joints are moving, not the hinge alone. In Royal Palm Beach, year-round heat, UV, and humidity corrode weld joints and settle post footings faster than inland climates. We do not just shim the hinge and walk away. We check the post, the footing, and the weld, and if the post needs to be reset in concrete, we tell you that on the first visit. The fix is a post job, not a hinge swap, and we will not sell you the cheaper thing that fails again in six months.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Royal Palm Beach since 2009.